Jump to content
SAU Community

Recommended Posts

  • Replies 81
  • Created
  • Last Reply

Top Posters In This Topic

Top Posters In This Topic

Posted Images

Will 18 x 9.5 +30 fit ok?

I know the GTR rims fit fine and they are 9.0 +30....

Dont want to buy rims that dont fit...again!

I would stick to 9 inch +30, mine stuck out a little on the front and were nearly rubbing on the inside but they are 17's.

I must admit, it makes the car handle the corners well with the 9 inch rims with semi's but the refinement I have now with the 8 inch + 235 road tyres makes up for it. No hint of tramlining or noise, good grip, its only the softer sidewalls causing it to feel a bit squirmy turning a tight radius corner.

Can anyone vouch for the accuracy of this site?

http://www.rimsntires.com/rt_specs.jsp

Apparently if I go 245/45/18 x 9.5 +30 it'll be the same (clearance wise) as my stock 215/55/17 x 7 +45 setup...and it'll stick out 30mm

Edited by ironpaw
  • 2 weeks later...

please clarify

i have been told from numerouse mag wheel dealers that 9.5 on the stagea is to wide and will creat issues

i am looking at dropping my m35 on some BC BR coilovers and running big break kits witch mean ill be running 19 inch mags

so what size width mags can i get with 19s? that i can use on the stagea that wont rub 8.5s or 9s

if i get a spacer does that mean i can go wider ?

with offset does a - or a + offset mean a bigger dish etc

or do u guys recomend 18s for the stagea

please clarify

i have been told from numerouse mag wheel dealers that 9.5 on the stagea is to wide and will creat issues

i am looking at dropping my m35 on some BC BR coilovers and running big break kits witch mean ill be running 19 inch mags

so what size width mags can i get with 19s? that i can use on the stagea that wont rub 8.5s or 9s

if i get a spacer does that mean i can go wider ?

with offset does a - or a + offset mean a bigger dish etc

or do u guys recomend 18s for the stagea

Spoolin12 , is running 19x9.5 at what must be around+20 odd now. At +30 his were still under the guards... Just. The tops tuck in more the lower you go.

He'd be the man to talk to, as I think his rims are probably the widest and the most aggressive offsets on here.

+ or - doesn't mean anything with regard to dish; only offset. However, the closer to a -ve offset you go; the better chance of dish.

Spoolin12 , is running 19x9.5 at what must be around+20 odd now. At +30 his were still under the guards... Just. The tops tuck in more the lower you go.

He'd be the man to talk to, as I think his rims are probably the widest and the most aggressive offsets on here.

+ or - doesn't mean anything with regard to dish; only offset. However, the closer to a -ve offset you go; the better chance of dish.

He told me he was running +40's? so he must've been running a 10mm spacer...

Guess my 9.5 +12 LE37's ain't gonna fit without guards being rolled!

What brand/model rims did Spoolin run?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I also understand psi but apparently most things make more sense in kpa oil pressure being one of a few exceptions so im trying to learn ahahahah, I have no idea of the relief spring pressure tbh I thought 110 which is the absolute peak it hits was about right, I was thinking of removing the relief and making sure it is in good condition, I would just replace it but couldn't find a replacement for an n1 pump too easily but I could just be blind.
    • It certainly does make sense that there is just no oil to pick up, but I can go 3 or 4 gears of WOT and have no oil pressure issues too (I have no logs of this unfortunately) and I have a fair amount of oiling mods to try and help only thing I'm missing is a rear head drain which is potentially the most helpful. 
    • speaking of the relief spring and noting this is one of those stupid times where I understand imperial (psi) but the graph is in metric (kpa), it looks like the oil pressure is a little low at full noise too, isn't the relief spring 120psi/830kpa?
    • No. All these dirty old Datsuns are shitboxes. Including the GTR.
    • Yeah well I was thinking...there is nothing that happens when you get off the throttle that should cause low oil pressure, its not like clearances suddenly change or and the relief spring would close and in any case the sensor is on the feed side....so more likely there was no oil available to pick up which means all the basic oil control stuff to: 1. keep oil out of the head (restrictors) 2. get it back out of the head when it gets there (external breathers/oil return, drilling out the block and head oil returns) 3. have more oil in the sump to pick up - larger capacity sump 4. have more oil near the pick up - baffles
×
×
  • Create New...