Jump to content
SAU Community

Recommended Posts

I got $6000 which was going to put a new engine in my car with a GTST gearbox, but I've had one of those 'maturity' hits recently and I've decided against driving a turbo.

Soooo... what can I do for $6000? I'm thinking exhaust, headers, coil-overs. Anything else that'll give me a bit more pick-up?

Link to comment
https://www.sau.com.au/forums/topic/351495-6000-to-bring-more-power/
Share on other sites

i guess your on p plates hence not wanting to drive a turbo? if so save your $6k till you can drive a turbo and get one.

otherwise wtf buy a turbo.

Meh. I like my car, I want something nice now. Not fussed about like 200kw +, I just want more than the 95-100 I'm guessing I'm getting.

I was going to put an RB25DET in, but I've decided against it. Got pulled over at an RBT station and he went through the normal three questions, "where are you going? Have you been drinking? Is this the non-turbo version?"

But he actually got me to pop the hood, and while he looked I sat there thinking "if I had done the conversion, I'd be f**ked right now". So I'm not going ahead with it.

I feel like I'm missing something other than the generic exhaust / intake / suspension stuff...

Spend it on a new avatar, that one is woeful

Lol but srsly save your money, you'll spend a packet on extractors/exhaust and it will make bugger all difference. Coilovers might be a good idea though, you'll appreciate a lower, better handling car AND they aren't non-turbo specific, so you could sell them to a GTS-T owner later on

Spend it on a new avatar, that one is woeful

Lol but srsly save your money, you'll spend a packet on extractors/exhaust and it will make bugger all difference. Coilovers might be a good idea though, you'll appreciate a lower, better handling car AND they aren't non-turbo specific, so you could sell them to a GTS-T owner later on

Yeah.. but I've got the stock exhaust so it's got that horrible rattling sound at 3k RPM.

The coilovers are a definite, I'm trying to make some time to get to a suspension place.. but it's so damn hard to :P

and LOL at the avatar, yeah, I just needed a picture. I hope you find my new one slightly more tasteful.

Exhaust. It won't make it much faster, but it will sound nicer. Just spend the time and money making sure you get a nice sounding one.

then suspension - you can do it yourself. I can't comment for R34 specific but usually Hypermax III 7 & 5kg/mm is the go for fast street(not the sport or the II version). ie. Rubber upper mounts and the softer rate than most coilovers, plus monotube.(sport has harder rate)

$6k is too much, buy some BC coilovers (99% the same as GReddy type S) $1300, some Whiteline Bars $600 tops, and nice cat back for under $1k and then spend the rest on a holiday or towards a house deposit.

It is your money, but take it from someone who spent every cent they earnt on cars and guess what? Now all I have is a heap of debt, because instead of paying off loans quickly I bought parts.

For a suspension choice you could always go something like a GReddy type s or some BC Br's.. Also a good CAI ain't bad for that extra throttle response. There are lots of other mods you can do but bang for buck wise you are ur only gonna get your money's worth if it was a turbo. But I'm sure u already know that

$6k is too much, buy some BC coilovers (99% the same as GReddy type S) $1300, some Whiteline Bars $600 tops, and nice cat back for under $1k and then spend the rest on a holiday or towards a house deposit.

It is your money, but take it from someone who spent every cent they earnt on cars and guess what? Now all I have is a heap of debt, because instead of paying off loans quickly I bought parts.

Lol you stole my idea while I was typing :-(

But he actually got me to pop the hood, and while he looked I sat there thinking "if I had done the conversion, I'd be f**ked right now". So I'm not going ahead with it.

See there's your problem.. What you should have been thinking was "If I beeped my horn right now I bet I could get him to smack his head on something would be soooo funny"

do the cat back exhaust ($500), get the bc coilovers and some whiteline swaybars for under 2grand allup and fit yourself, rims/tyres for a couple grand. Perhaps a big brake kit ready for the engine conversion (conceptzperformance sells 324mm rotors with brackets for your front brake upgrade for around $600aud delivered.)

then put the rest away and save more (again) for the RB25det conversion, when you can legally drive a turbocharged vehicle.

dont waste it on ecu tuning, extractors etc, for the $$ spent the gains are not impressive.

Yeah.. but I've got the stock exhaust so it's got that horrible rattling sound at 3k RPM.

The coilovers are a definite, I'm trying to make some time to get to a suspension place.. but it's so damn hard to :P

and LOL at the avatar, yeah, I just needed a picture. I hope you find my new one slightly more tasteful.

yes, love it :D

do your suspension yourself, it's really not hard. Basic tools and a mate is all you need

Buy nice high quality rims. You can transfer them to your next car, sell them or just keep them for when you turbo this current one.

TE37s, Meisters, CE28s, Advan RS-Ds... so many nice ones.

It's NA dude.. so 4 stud gheyness

5 stud GTS25t brake conversion will fix that (~$500).

If he wants to spend the money on his NA, let him do so. I'm quite happy with my NA after doing all the mods suggested in here even after getting my full license.

No one's mentioned LSD aswell. Try and find an R33 viscous LSD, maybe cost you around $200-300.

Depending on what state you are in - modifying the car for performance is illegal be it a turbo or N/A model anyway.

In Vic, make power mods, you still get boned even if it's N/A ;)

IMO 6,000 you will see not even 50% of the potential you could from a turbo motor.

6k spent on an N/A, you'll be lucky to go from 90-100rwkw to 140rwkw.

Where as with a RB25DET conversion you'll go from 140rwkw to 200rwkw and still have money left over.

I think the best choice is hold onto the N/A, get off P's and then put that 6k towards a nicely modded GTS-t :)

Otherwise, do what Keiran said and buy some decent wheels.

Only issue there is - insurance probably wont cover the full value of them

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • To clarify, I meant nismo bushes, not control arms (don't even think that's a thing for my car). So the suspension specialist said, if I buy those nismo bushes which are perfectly centered it will cause my car to veer in one direction. Whereas he said the current offset bushes that I have were put in on purpose to fix that issue. This will be my third wheel alignment if I put these bushes in lol. My chassis is straight, all my rails are clean.
    • OK, well, in that case, the suspension specialist is either a moron, or you aren't understanding what he was trying to tell you. Nismo arms are not really different than stock arms. Both are fixed geometry. I don't know if the Nismo ones are a little shorter than the stockers (or perhaps even a little longer) or the same length, but....if you swap from stock to Nismo, whatever happens to one side will happen to the other side. It will not cause it to steer left or right. That is unless you have adjustable bushes in your stockers, and they happen to be adjusted to dial out some bent chassis shenanigans. But, if that were the case, you'd just put adjustables in the Nismo arms anyway, because Nismo arms are essentially just expensive stock arms. And doing a wheel alignment is just a weekly thing in my world. I have had the suspension apart so many times this year that I've lost count and just about worn out a torque wrench. I'm out in the shed right now cutting up some alloy section and making bases for my new stringline setup. Got to make new swivel plates next, then I'm good to do toe properly, as well as camber and bump steer.
    • Yeah, nah. Not a thing. The gasket between the top of the plenum and the runners is far more likely to blow out when it gets old, and not really at ~14 psi. These things have been run to double that for 30 years without that being a common thing.
    • I plan to pull the intake manifold off and check the gaskets, i read that the block to manifold gasket can blow over 14psi and when i picked up the car it was set to 1.2bar on the controller. Send the injectors out for cleaning. Ill also pull the cam covers off and do an inspection, check some valve lash. Someone also said that the timing belt can rub or vibrate against the belt cover and make that sound. Definitely need to get an AFR gauge on it, if it was lean idling im sure it wont be happy
×
×
  • Create New...