Jump to content
SAU Community

WTB: Brembos / Torque Split Controller / 32 GTR PFC / HICAS kit


Recommended Posts

Hi all,

Looking to get hold of all the following for the new race car:

* Brembo Calipers (Front and Rear) from R32 GTR Vspec, R33 GTR or R34 GTR

* HKS Torque Split controller

* Power FC and Hand Controller to suit R32 GTR

* HICAS lock kit.

So....who has what?

Also interested in the following

* Catch Can

* Oil Cooler

* Power Steering Cooler

* Non HICAS steering wheel

* State Champion Trophy :P

All to suit R32 GTR

Thanks for all whop provided info.

I'm still looking for the Brembos, pls let me know if you are considering selling, I can pay a good price for them as I need them :D Great chance for a GTR owner to put a few thousand towards upgrading to some nice GT3 or AP 6 piston jobbies

Duncan, have you considered a dogbone adaptor and bigger rotors ?? Might cost less and get the same result -

I'm gonna get DBA5000 rotors (R33 GTR diameter) and use std calipers but with the dogbone adaptors - same braking ability but heaps less fade....

Hey Brendan, unfortunately the regs are quite specific that they have to be standard rotors and calipers, since the non-vspec 32 rotors are crossdrilled that leaves them out :)

So, teh r33/34 Brembos it has to be.

Of course for anyone looking at the adaptor option I've got a set of standard r32 calipers for sale :D

Damn Nazi regulators.....

So you can upgrade your brakes to bigger R33/R34 (which are standard) but can't deviate from the standard calipers (and newer rotors)....

Those rules suck man - why don't you get standard Porsche Rotors and Calipers - they are stardard kit (on a Porsche) That's the same as upgrading to R34 brakes isn't it (very differenent cars).......

np, I'm not in a hge rush.

ylwgtr2, I'm really looking to pick up both front and rear together, and I'll pay around 2,200 for them.

Those with a 33 or 34 GTR, think how 2200 could get you started on some *big* stoppers :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all. Been a while but things are moving along. I just have something that I am wondering about. Since I will use OEM turbo oil pumbing, I got myself a new bolt, the one that goes into the engine block oil feed. As I recall (and see visually) this bolt comes restricted with I think a 1.7mm hole? Not quite sure but it was something around that size. The turbos have 1mm restrictor bolts installed, as necessary due to ball bearings and my higher oil pressures. Can I now just use that OEM bolt with the 1.7mm hole in for the engine block or will this actually be too much oil flow restriction and I have to drill it out first? In my head it would make sense for the bolt to be at least 2mm wide as both turbos take "1mm of oil flow". Do let me know if my logic is flawed here, I just want to make sure I don't kill my turbo bearings with too little oil. Don't know if I can trust the saying I read somewhere that ball bearing turbos essentially only need an oil mist
    • There are several aftermarket options available, from not-too-painful moneyhttps://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35 and  https://justjap.com/products/crank-motorsport-billet-rear-axles-fits-nissan-skyline-r33-gts-t-r34-gt-t?srsltid=AfmBOorQk4xkGUa98kO7v2ePLUiNt-HRrM2AwWNw9mbSIVE1ujBVwY__, all the way up to The Driveshaft Shop https://driveshaftshop.com/skyline-cv-axles/
    • Yeah based on old XRC5964S specs, it looks to be roughly GTX3576R sized? But this 5964S compressor will flow 90lb airflow somewhat similar to the compressors in both the GTX3584RS or G35-1050.. I fully expected the 0.64 rear A/R to choke up top - seems way too small from typical convention - but these are seemingly beneficial over the prior 0.82 results.. Be interesting to see if he comments on the EFR question in that thread - he mentioned in a prior video that BW EFR's were the "cats pajamas 10 years ago", but by the sounds of things all his kits have been using Xona for quite a while now.
    • Yeah it’s still got the oem manual gearbox and clutch, only kinda mods are a blow off valve, coil overs, and a aftermarket intercooler. Also had it for about 2 months now with a lovely midnight purple paint on it.
    • Yeeeppp, been following a lot of the testing on the latest Xona stuff and there are some mental results.  He also went over 1000hp @ 4 hubs on his Mainline with a XRE6364S (63mm) which was also well into the 20psi range before 4000rpm on a 2.5. Crazy stuff. Fwiw the XRE5964S is basically the modern equivalent of their old HTA3582 - would drive nicely enough on an RB25 or 26, but proven capable of a huge amount of power if you want to spicy with rpm tho even at sane boost levels will make stout numbers 
×
×
  • Create New...