Jump to content
SAU Community

Recommended Posts

hi

i am selling my r33 gts n/a, pics up soon

rego till late febuary

hks hyper d coilover suspension

nardi steering wheel

oem rear strut brace s2

5 speed manual

colour is black, flush fitting fibreglass bootlid, matte black

has oem s2 sides kirts and pods, has black headlights(from turbo model)

zepter 3 piece wheels, good tread on tyres

has axpei exhaust

it is 2.0L model, doesn't have hicas

$5500

thanks, josh 0412788262 (i work afternoon shift cannot take calls from 3;30pm)weekdays

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/351860-r33-gts-non-turbo-black-manual-20l/
Share on other sites

the silvia is out of rego, its a pig

but i will register it if the skyline sells, otherwise it will become a dedicated track car

i can't afford to keep 3 cars in rego

and yes the r33 is rb20e, 450kms to a tank street driving

good points

tein super drift coilovers

momo mod08 steering wheel

bbs 17 forged wheels

brembo evo front brakes, r32 rear brakes/handbrake set-up bm57 brake master cylinder

5 stud conversion

acrylic windows

spoiler removed

vertex front bar, nismo side skirts, supermade gentlemans rear bar, smoked taillights

bad points

ca18de engine

i have a s15 sr20de+t engine to drop in

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • These are small points I should actually add to my original post. GKtech makes an extended slave line for this conversion. It's what I use, and it works well. You'll also need a CD009 slave cylinder.  S/R Chassis Z33/Z34 Conversion braided clutch line As for transmission sensors, you'll need to both extend the wiring and replace the connectors. I can't recall which is which, but one is your neutral switch and the other the reverse switch. As they are just switches, just test for continuity with your transmission in neutral or reverse to figure out which is which. Connectors:  VQ35 neutral Switch Connector | Wiring Specialties VQ35 Reverse Switch Connector | Wiring Specialties 
    • I’ll try and see it could be the release bearing. As for the 4th gear grind maybe clutch doesn’t disengage properly cause it is slightly like very slightly hard to go into first could be due to the slab cylinder pin being short uni clutch is a twin plate.   Ive attached some assembly photos hopefully you can open the link and see maybe detect what’s wrong https://share.icloud.com/photos/0dc2YvW__Hl6jl-l2_0jejjpg https://share.icloud.com/photos/09e0jkWOK-vP48c1cfY6u3ViA https://share.icloud.com/photos/0b4rDmh5R7pK7fb1VtND73a3g https://share.icloud.com/photos/05eeUi_6dC4DVi80jOUYDgb0g https://share.icloud.com/photos/06335TgY1XxyIJal_wkdQLhzw
    • Yeah for sure that is peddle adjustment 
    • What are your thoughts on this after having it for a while, worth getting?
    • Downshifts are harder on transmissions than upshifts, the input shaft naturally slows down once disconnected from the engine so the synchros aren't doing all the work. There's no "natural" tendency for an input shaft to increase RPM. Something is not right there, I don't have a great answer on what. You can try a dedicated GL4 75W90, I plan to switch to Motorcraft XT-M5-QS which is supposedly a very good 75W90 for NB Miatas which have a weirdly sensitive transmission from the factory. I would chase down why your clutch is making a hissing noise, that's not normal. It might be no big deal but in the absence of anything else to investigate I would look at that.
×
×
  • Create New...