Jump to content
SAU Community

Recommended Posts

I was thinking about this and it's not so simple, many cars now seem to be getting more heavy, complex, powerful from factory and consequently very expensive and hard to modify.

Skylines are cars that kind of offer democratic hi-performance to the DIY modder and are not that expensive.

I'd put the R35 into a totally different bracket to be honest.

Where have the manual sports cars gone? Especially RWD like the GTST?

This has been discussed.. ended up being 350 - 370Z and V35 & V36.. maybe you should search :P

Ha ha why just Nissans though?

The cars you refer to are luxo-sports cars. I like say the 350GT but it's no hooligans sports car and the V-series have thrashy drive trains. And the 350Z is nice but a bit ghey to be honest as well as being NA so harder to get moar power.whistling.gif

Edited by Tony de Wonderful

i think the new hyundai coupe thing will be one for sure. the RS focus have a decent following too. then the typical rx8, wrx and evo and of course the r35, as well as the above mentioned 350z and 370z.

i think the new hyundai coupe thing will be one for sure. the RS focus have a decent following too. then the typical rx8, wrx and evo and of course the r35, as well as the above mentioned 350z and 370z.

Well the WRX is now a family hatch, and the RX-8 is very meh compared to the RX-7. Turbo sports cars seem to have had their heydey in the 90's IMHO and now you tend to get heavier and less sporty NA's.

WRX also has a sedan version but indeed takes on more of the liberty look.. the main crowd are after luxury these days and the car manufacturing will go with the largest sales..

XR6 Turbo? the LS1-on Commodores etc

ding ding ding

Any falcon straight 6 turbo will be the next "tuned" car of the masses.

If you think about it the reason's the skylines are a big hit is (relatively) cheap quick easy power. Sames as the VL turbo's before them, same as the Falcon turbo's after them.

And completely disagree about the V35 and V36 being in that list or RX8 or anything naturally aspirated that costs $50k really. I love em and have had2 V35's but it will never be a car of the masses and a "tuned" car like the 32-34's are/were

i think it's almost too early to say what out of the current cars (other than xr6t) will be tuner cars in the near future as the cars are still too expensive. if you go back 10 years, how many skyline imports were really in the tuner scene in australia? very few because of the cost and supply. most of the cars i mentioned earlier still have good 'tuner' appeal, so you will get the tuner companies doing good work with them, but that doesn't mean that the general public will flock to them. the cost is still a massive factor (r35 GTR is a perfect example).

i think that at this point in time, the 2 biggest 'tuner' cars currently being worked out of the late model stuff would be the xr6t and anything with a LSx motor in it.

Maybe a BMW 1/3 series?

RWD, manual, 2 or 4 door, not too much heavier, small to medium capacity turbo or non turbo inline 6 engine (with relatively low power output so I'd assume its fairly easy to make more power from it), sports oriented suspension.

Not sure if they fit the bill of being cheap/easy to modify but other than that when you think about it they are like the euro equivalent of skylines

Edited by Crackfox

xr6t /thread

Maybe but I'd say they had more in common with the V8 scene than the import tuner scene (aside fromt he fact they are not imports :))which is more into track/drift.

They would make great drag cars but for all round 'performance' not so good.

Criteria:-

* RWD ?

* Straight 6 ?

* Turbo modification ?

* Corners you beaut (damn better than an XR6T)?

Thought of a Bavariacars.com.au E46 M3?

Compliments of Herbert Gattermeier - BMW Driver's Club.

Maybe a BMW 1/3 series?

RWD, manual, 2 or 4 door, not too much heavier, small to medium capacity turbo or non turbo inline 6 engine (with relatively low power output so I'd assume its fairly easy to make more power from it), sports oriented suspension.

Not sure if they fit the bill of being cheap/easy to modify but other than that when you think about it they are like the euro equivalent of skylines

Yep definetely. Fair enough they cost a shit load nowadays but one day they will be affordable. In the US they are unbelievably cheap.

Dad's is an 09 335i coupe with the M sport package and the 7 speed dual clutch paddle shift transmission.

The thing handles like you wouldn't believe and in complete stock form can pretty much smoke anything off the line (without even using the launch control).

From factory they are heavily detuned running lowish boost. The most I have seen on E90post is close to 300rwkw out of the factory twin turbos and 11 second pasess.

Absolutely fantastic engine the N54.

Lexus IS200/300

2JZ capable. Surprised why more people don't play with them. Once you get past those gay tail lights (there's aftermarket alternatives) they are great cars...

i agree with that hyundai coupe thing (forgot the name, but saw it drifting) pretty sweet car imo, looks decent, doesent look too heavy, sporty and stylish.

most cars these days rely more and more on electronics which in real life isnt alot of fun for us, BMW Mercedesa etc etc are mostly out of the league for the majority of people looking at a skyline equivilant, aftermarket tuning options cost an arm and a leg hard to come by aswell, too heavy, too much electronics to mess around with, disconnect one thing and your air lift suspension dont work or your alarm wont go off, the skylines 31-34 were like the m16 carbine equivelent in cars, 90% interchangability, clip on clip off stuff, parts you can find left right and centre and really, arent that expensive to maintain.

but then again, sports turbos was a thing of the past, 80-90's, now its all about that ghey global warming and emissions BS.

only people who dont seem to have a limit on that kind of stuff are aussies and the americans, they still build the most basic/ standard you can possibly get out of any engine/car combination, throw a big block into a big car.... good idea for the tuning drag community, but not so much for most of us on this forum.

but if you want to, think of it from an overseas persons POV, back in germany everyone drives BMW's and mercs, thats their equivelant to our skylines.

USA, all drive muscle cars, UK..... god knows what they drive, Japan is same scene as here, France and Italy its either citroen or fiat or some ol' BS

thats my dollar worth of info

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You have just offended every teenage boy in America
    • Structured text and other high level PLC programing languages are not allowable in Functional Safety. They are very difficult to audit. My PLC stuff is almost exclusively oriented towards Burner Management Systems which are a particularly pernicious form of Safety Instrumented System, when implemented in an SPLC. Even the part of the code written to work in the non-safety logic part of the PLC, like with a Siemens S7-1500 series, still needs to be treated as if it was safety code, with access restrictions, code fingreprints and the like. And Allen Bradley can go EABODs. They ae full of shit. They have this whole lie going on where they say if you use a ControlLogix controller and its IO, and then just duplicate the IOs (ie, run in series or parallel depending on type, to try to make it "fail safe") and "use these programming styles and place these restrictions on what you do" that you can achieve SIL2. What a load of crap. They just get away with it because no-one in the US seems to understand the first thing about Functional Safety and carries on as if all they have to do is buy only SIL2 rated equipment and hey presto, it's a SIL2 system. Idiots. /rant
    • If you're really considering leaving it, a great question to ask is, is the magnet going to stick to the sump? The answer to the above is the same answer towards if I'd have any level of comfort leaving it... Personally, based on the cost of a motor if the magnet were to cause damage, I'd be fishing it out either way. Use the methods in here. It fit in through the plug hole, it'll come out.   PS, get a small actuatable claw for a bore scope. OR if you know a vet, they have really cool controllable scopes with hooks on the end. Supposedly they're like playing a video game. Ask if they can acquire you one of their scopes... Engine oil after all is just a different type of lube right? Will only make it easier on the next dog or cat...
    • All other (Boolean) logic functions though, are just built on those blocks above. Which does give you a lot of functionality in logic. It is basing that on using thresholds with analogue signals like GTS alluded to.   Not having things like timers will make it less useful for some of the ramp up logic you'd want, and again, on Haltecs capacity specifically, I'm not across anymore what you can / can't do with different tables.   I'm assuming, with your logic you want to implement, not only do you want your timing safeties, you're wanting to be able to derive the duty cycle for your solenoid, to maintain I'm assuming 175PSi? Or are you using a standalone WMI controller to maintain the DC correct, and you just want the Haltech working out which fuelling maps you should be on?
    • It doesn't seem to follow revs. Oddly it seems to follow TPS a little bit from what I can see, but with some delay a bit. IE end of the graph, when he lets off throttle fully, pressure drops a lot, then slowly builds back up, but rpm is on a nice cruisey drop off. I do agree though, it seems very electrically.
×
×
  • Create New...