Jump to content
SAU Community

Recommended Posts

sounds like that 50mm is not only suspension lift, but total lift including tyres and bodylifts as well. ie it says 50mm lift to trim height, which is the edge of the gaurd/flare. That would suck for 4WDs. Any links to actual info about the proposed change?

I haven't actually read the proposed legislation - just the comments on the link from the first post. I hope that those so vehemently against this have read the legislation, so they understand what they're protesting against.

I agree with your point about the 4WD's, hence my earlier comment. Not that I'm all for jacked up mud racers on our roads, but on a 4WD it doesn't take any extreme mods to blow that 50mm out of the water. Like always, a blanket rule across all vehicle classes is not the answer.

Beseides, there's already legislation in place to limit excessive lowering of cars. Not too many standard road cars would handle more than a 50mm drop and still be able to maintain the required 100mm ground clearance.

Why does a road car need to be raised / lowered more than 5cm anyway?

...

Maybe hardcore offroaders need the extra lift, and I'm not going to argue against that.

Well there you go.

My point is, there's reasons why you'd want to raise/lower your car more than 5cm, as you said yourself Extreme 4wd'ers. While skylines might not need to be lowered 5cm for track work, i'm sure there's some cars out there that could be safely lowered, with a benifit, more if they were to be used on a track aswell. no need to force people to buy a trailer if they don't want or need to.

Now, if someones driving around in a dangerously lowered car with distasteful rims, wouldn't the current laws mean that they'd be defected anyway?

Not everyone can afford a track car and a daily. Or at least people should be able to drive to the track. Just because you see no need for a car to be raise or lowered does not mean it should be illegal to do so...

There are already laws in place for lowering (100mm lowest) and raising car ( not sure exactly how high is highest)

If they really want to improve safety they should be stricter on tyre manufacturers and ban the Chinese plastic fantastic tires. Now they are dangerous..

Signed.

Even though this lowering ban won't affect me much I'm sick & tired of the government's fantasy fetish to "ban" everything they don't like.

Now whats this BS about increasing registration cost of older cars so we are all forced to drive white goods grandpa spec Camrys?

Bravo for the selective quoting. Looks like you'd make a good journo.

Well lets be honest, your line of thinking is flawed.

The default should not be unlimited power to government then justify why a law should not be implemented.

What is it about vehicles raised or lowered more than 5cm that warrants prohibition?

Give them an inch and theyll take a mile, they wont stay at 5cm. The only length I want to give them is some hangrope.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi soviet_merlin, We appreciate your concern regarding this possibly being some sort of PR/Political hype, I assure you that is not the case, I wish we could claim something like that, but in this case, we merely reached out for comment on the basis of the outrage we too felt, as those heavily in the automotive industry. Ps. the original source in the social media post is CarExpert not CarExplore.    Best, CE.
    • Made a bit of a discovery, but while I was cruising, I randomly decided to test to see if it worked and it showed up on my IC7. The entire time I tested it before, I never thought to turn the ignition on. I only tested it with head lights turned on but with the ignition off. Huge oversight on my end. I’m a dummy. I know. 
    • G'day all, I have drilled and tapped the hole for the relocation of the timing belt tensioner. That was straight forward. I'm unsure if I need to also put another hole for the smaller stud that the spring behind the tensioner catches on (this is how it seems to work in its original spot). Or do you not use the spring behind it and just torque it down? Thanks in advance, I did a search but couldn't find anything related and it doesn't mention it in the rb30det sau guide.
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much 
    • Hi All,  just thought I would provide an update as I know smooth (Matt) was on this forum from 2003.    my brother Matthew passed away end of may 2024 at the age of 41 from liver failure. I am not sure how many of his original team krazy friends are still on here or active but thought it reasonable to let the forum know.    if you have any photos or pictures it would be great if you could share them.    it took me a while to work out he was active on here.    thanks so much   
×
×
  • Create New...