Jump to content
SAU Community

Recommended Posts

build is lookn good ! was wondering where u got the new dash board and bits and pieces, and rear / side quarter window trim parts from ?? got the same bubbling issue in my 32 gtr unfortunately :(

i mported all of this for him. prices above . these were correct at time of import.

  • Replies 109
  • Created
  • Last Reply

Top Posters In This Topic

  • 2 months later...

Not much of an update but i was away from home for 3 months and only just got back last week so after charging the battery and getting the oils flowing where they need to flow again i've started to look into doing some more to it

I had some clear corner lights sitting here for over 7-8 months now and thought it was about time i fitted them up

Newclearrepeaters.jpg

PB220365.jpg

I was surprised at the quality of fitment, they actually fit really well (My panel beater put the passenger side wiring for indicator in wrong place though so it ends up popping the passenger one out a bit but i will fix this in next few weeks as these ones aren't staying in it for too long anyway

Buying new set of N1 Spec headlights for car so will also buy another set of these corner lights but in the smoked series to match in with headlights along with another set of Nismo guard repeaters but this time also smoked

Hopefully will be fitting this Abflug carbon spoiler to front around same time which i think will tie in nicely

ABFLUGCarbonLip.jpg

Getting rubber for new Lenso's in next few weeks as soon as i get my tax cheque back also, so everythings starting to come along now and should be looking good for xmas :)

  • 2 weeks later...

Thought i'd buy myself as well as the car it's 2012 Xmas presents today

Awaiting arrival of -

4 x 265/35/18 Kumho KU39 tyres for the D1R rims

Brand New Genuine N1 Headlights

New Smoked GTR Indicators to match headlights

New Nismo R33/34 GTR Smoked Side Repeaters to match

Set of Perfect Nick GTR Seats with no rips or tears to replace my slightly worn items

and a New GTR Blank Key for a spare

Now just can't wait for it all to arrive and start fitting onto car

Also pricing up new suspension system for it tomorrow, probably consisting Bilstein shocks front & rear, Kings (or something else that's decent) springs, Whiteline stabiliser bars & assorted other products

Pics will go up as all arrives

New tyres have arrived, will see if i get time this week to get them fitted to rims

Was going to buy set of BC coilovers but ended up buying a set of TEIN Superstreet coilovers off a member here so should see in next couple days

coil1.jpg

New lights etc are sitting at Post Office awaiting collection to :yes:

Just finished ordering parts for new suspension, this is what i ended up with

All brand new except for TEINS

TEIN Superstreet coilovers (as above)

CUSCO Front OS Strut Bar 231 540 A

CUSCO Rear OS Strut Bar 231 541 AN

CUSCO Tension Rod Bar 231 485 A

WHITELINE Adjustable Front Stabiliser Bar BNF27Z

WHITELINE Adjustable Rear Stabiliser Bar BNR26XZ

WHITELINE Front Castor Kit KCA332

WHITELINE Front Camber Kit KCA336

WHITELINE Rear Camber Kit KCA347

WHITELINE Rear Subframe Alignment Kit KCA349

Just need to buy new King Pin kits and few other little pieces now and everything will be virtually brand new under there

Currently removing all factory bushes out of spare front uprights i have here and sending them away to be re-powdercoated before getting new components fitted to them

Mate...you should run these to complement your Tein coilovers!! Give me a call to discuss (think I sent you a PM other day with my number)

http://www.skylinesaustralia.com/forums/topic/412108-bnr32-tein-f-r-strut-braces-brand-new-must-see/page__fromsearch__1

Also, where are the under bonnet pics??

Mate...you should run these to complement your Tein coilovers!! Give me a call to discuss (think I sent you a PM other day with my number)

http://www.skylinesa...__fromsearch__1

Also, where are the under bonnet pics??

DAMN i just spent that buying these new Cusco's too

May give you call tomorrow, i'll have think about it but i think the blue on the Cusco will tie into theme of engine bay i have planned

Engine bay is all bog stock standard at moment, engine stuff will be commencing shortly. I wanted to get the suspension, brakes and exterior all sorted before doing the engine so once done it will be all but essentially finished to the way i want it

Also, where are the under bonnet pics??

PC130360.jpg

As mentioned, totally stock under there as i have refrained from buying any go fast bits or bling parts until i had rest of car finished first. Been hard though i tell ya, especially when there was a Trust TD06 twin kit for sale not so long back (really should of bought that and just put in cupboard as now can't find any)

Here's few pics of what's here ready to get fitted, heaps more on the way in post at moment

PC130362.jpg

PC130372.jpg

PC130369.jpg

PC130366.jpg

Edited by whizzn

just an opinion... what if you pulled about the projector lights, and painted the internals black?

seeing as you've got them out, just for a "wonder what it'll look like" thing.

he can't they are the lights off my car..

Where did you score the n1 headlights from with grill clips?

Bought the headlights from Kudos Motorsport, there an online business based on Gold Coast. Bought few things from there now, there great, fast shipping and great communications

http://www.kudosmotorsports.com/catalog/index.php

he can't they are the lights off my car..

The man speaks the truth, i borrowed his lights as one of my other N1's had smashed glass that i havn't got around to replacing yet and come to think of i i have no idea where the other N1 headlight is now either hmmmmm

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • My idle is set at 950rpm though - Moving the timing around 20 degrees is not really what I'd call a calm idle. That said... neither is chop, by definition. The LS ECU likes to adjust timing to hold idle as opposed to air. It'd work, but generally speaking there'd be a discrepancy in the base idle and the IACV would want to move the timing around anyway to maintain said idle. I think I'm just going to keep the timing steady anyway. Preserve my engine mounts.  My aircon is now officially regassed. As the guy was reversing I noticed my reverse lights do not operate, along with my reverse cam. This is a bit distressing, because 100% of guides talk about which wire to connect to backup cams as "the goes with the [other color] wire". Often when doing conversions. Unfortunately the R34 colour wires aren't documented Unfortunately I had a T56 Magnum gearbox with it's reverse switch, which also isn't documented. Unfortunately there's definitely not documentation for people with both of these in the one car. Unfortunately I forgot. After many hours of this, I have a reverse cam and reverse lights again. The wire going through the trans tunnel to the reverse switch had broken. Upon inspection, it looks like this one wire had about 7 spade terminals and extensions in it.. for reasons I cannot possibly comprehend. I also spent the 750 hours required to clean up the wiring behind my head unit which now looks like this: This is a monumental improvement relative to what used to be there WRT triple gauges, head unit, traction control, wideband controller, and whatever the f**k OEM stuff still exists there in various states of connectivity/needed. Next step is to check in at the Exhaust shop to see/confirm how much clearance I have, to decide what mid mufflers or 'resonators' (which are just straight through, narrower mufflers) I can add and hopefully cut out a lot of exhaust leaks, pinhole, v-band or otherwise. But first step will be to 'take a look' before the next step.
    • Fark the AFM card and Nistune, Haltech Nexus S3, DBW, cruise control, flex fuel, dis dat.  
    • It's most likely the bolt/bush where the cover bolts back wore and allowed cover to move forward.
    • Still haven't put the injectors and R35 AFM in so we can tune the bloody thing for the HG highflow it got mid last year! I think I can forecast the upgrade path to a bigger twin scroll, external gate, Haltech, flex setup, Samsonas, dis dat, etc will be .... a while away!
    • Should have taken that opportunity to slot in a twin scroll turbo setup. Maybe next time.
×
×
  • Create New...