Wrecking Project R33

[2BNVS]

Hey guys, the Mrs is wrecking her R33 so got a hell of a lot for sale. Not selling the actual car though!

All the parts are still assembled on the car, so i can get pics tomorrow of it all fitted up. Im beginning to disassemble items slowly, just hard with work. Prices are negotiable but items wont be given away otherwise she will just keep them. All parts are still new, havent had the car running with the current set up yet. reason shes selling is to have something a bit more practical.

I did have a list of every part, but i dont have Microsoft Word on here, so ill do my best remembering everything

- RB26 Head, Jun 272deg 9.7mm lift cams, Jun Valve springs, Sard twin entry fuel rail with speedflow fittings, Siemens 700cc injectors, stock coilpacks, Malpassi fuel reg, chromed cam and timing covers, fitted with speedflow fittings to attach to catch can, Tomei cam gears, Gtr chromed plenum with 6 throttle bodies, Greddy oil cap - (everything but the actual head itself (obviously) and coils are brand new)- $2700

- RB30 block, CP Pistons (8.3cr) Gapless rings, Argo Rods, Ross Tuffbond harmonic balancer, Larger sump- $2200

- Garrett T04Z 1.00 Split pulse housing with exhaust housing Ceramic coated, Matching ETM Custom manifold also Ceramic Coated,Trust 45mm External gate, Oil feed, water feed, water return lines (do not have oil drain line, Fittings are Proflow, Matching ETM Custom 4" V band dump pipe also Ceramic Coated, Screamer pipe, 4"chromed intake pipe (these items have never been used at all just fitted- $2300

- Custom 3.5"exhaust coated black from Oak Flats Mufflers with a cannon rear muffler. Exhaust was designed to be able to run both Screamer pipe and Plumb back in for road use ( block off plate). Cannon used but exhaust never used just fitted.- $700

- Custom ETM 1.5L Surge tank- $100

- Custom ETM Catch can, ( no lines or filter)- $80

- Custom ETM Airbox ( tig welded and press bent)- $80

- Custom Intercooler piping, with turbosmart 50mm BOV fitted on pipe tucked up behind headlight out of view - $450 ( can sell the complete intercooler system and BOV- $600

- Chromed air duct guide- $50

- Autronic SM4 Ecu, loom, Boost controller- $1500

- Autronic Cdi- $500

- Bosch 044 pump- $80

- K&N Pod filter- $50

- Full show interior, Recaro front seats. Everything top to bottom re-trimmed in beige leather. Dash and plastics have been chromed, 3 Gauges mounted on dash, blue EL Dials - $3000

- Gtr rear hubs and brakes- $350

Will go over the car and add items that i have missed coz im sure there are, with a long term build and so many parts keeping track of everything done is a nightmare, will also add pics.

As i mentioned earlier, most parts are still brand new although fitted.

Postage can be done, although the bigger items organizing your own freight would be great due to work/time commitments.

Prices are again negotiable but not giveaways otherwise she will just keep it all as it is.

Located on the Gold Coast QLD. Do have family in northside brisbane so if that makes it easier to meet up there with them that is fine. Also travel to Cleveland for work daily so again i can bring parts for a meet up in that area as well.

Cheers Guys

Ben.

PM on here is the easiest way to contact.

Edited January 31, 2011 by 2BNVS

[2BNVS]

- Also have a never used but fitted JUN Oil Pump- $500

- Forgot to mention the turbo lines are braided.

- The block has been done to accomodate the ARP 1/2"head studs, also used ARP rod bolts

can also separate parts from the head to make it easier

Edited January 31, 2011 by 2BNVS

[DamageInc]

pm'd

[Lust_R33]

have you got any vids of the motor running? i might be interested in the head + block

[BLITZ-26]

can you PM me your contact number please

[2BNVS]

Head/motor/Jun pump- Basically sold

I also have guys a custom car trailer that was built by my uncle a qualified boilermaker. Shes a big one, i designed it so the car sits on the tray with no overhang, tray is mesh steel

75x50x3 main frame

50x50x3 cross frames

Dual self leveling/tilting axles, perfect for low cars. rated at 2000kg

4x 14" ford rims with light truck tyres

4x electric brakes with brake controller.

Has 4m long ramps framing is complete but needs the mesh steel welded on. They can also be shortened depending on the car i didnt bother but i could have cut them down.

Perfectly balanced, honestly having the r33 on it behind a petrol rodeo ute from sydney to Gold Coast was no effort whatso ever

I need to mount the rear lights, jokey wheel, give it a paint, if you wanted to do the mesh u could, otherwise with a deposit i could have it all completed ready to go. (no rego)

im willing to part with it for alot less than it cost me so

$4200 and i can have it all ready to go ( with a deposit)

$3600 for the everything but the mesh steel ramps welded up ( finding a time to get a mate with a welder can be tough)

i can try get a pic of it but its at my bosses place in his shed as i dont have room for it here

cheers...ben.

[Rydeit]

Still selling gtr rear brakes?

[2BNVS]

Rydeit: yeh mate still got the rear brakes with lines, were u after the hubs also? the car was going to have a gtr rear end fitted but never happened.

Guys i had the fuel pump as an 044 but got confused with another pump in the other car its actually a 984 so $65 for that.

Ben...

[Rydeit]

pm sent

[sav man]

pics of the catch can?

[2BNVS]

heres some pics

the drainpipe on the turbo is not included this was just used to trial things in the workshop, was taken prior to getting coated, can get an undated pic also, the frontal view of the turbo shows how Leigh made it sit lower that way there are no clearance issues with the rb30 block

will get more pics of ecu etc and other items u may be interested in

[2BNVS]

adding more pics

[Bubble]

PM Sent

[BLITZ-26]

Hey keen on the Autronic ecu

and would you seperate the cam covers and fuel rail if not sold?

Thanks

[2BNVS]

hey mate motor sold ( incl. fuel rail and covers). have a keen buyer for the ecu and cdi, let u know if it falls through

[westside180]

still got the rear brakes, do you have the handbrake lines etc aswell? if so please pm me

thanks lindsay

[BLITZ-26]

bugger..... let me know how it goes i'll grab them if it falls through

[yye-33w]

Hey guys, the Mrs is wrecking her R33 so got a hell of a lot for sale. Not selling the actual car though!

All the parts are still assembled on the car, so i can get pics tomorrow of it all fitted up. Im beginning to disassemble items slowly, just hard with work. Prices are negotiable but items wont be given away otherwise she will just keep them. All parts are still new, havent had the car running with the current set up yet. reason shes selling is to have something a bit more practical.

I did have a list of every part, but i dont have Microsoft Word on here, so ill do my best remembering everything

- RB26 Head, Jun 272deg 9.7mm lift cams, Jun Valve springs, Sard twin entry fuel rail with speedflow fittings, Siemens 700cc injectors, stock coilpacks, Malpassi fuel reg, chromed cam and timing covers, fitted with speedflow fittings to attach to catch can, Tomei cam gears, Gtr chromed plenum with 6 throttle bodies, Greddy oil cap - (everything but the actual head itself (obviously) and coils are brand new)- $2700

- RB30 block, CP Pistons (8.3cr) Gapless rings, Argo Rods, Ross Tuffbond harmonic balancer, Larger sump- $2200

- Garrett T04Z 1.00 Split pulse housing with exhaust housing Ceramic coated, Matching ETM Custom manifold also Ceramic Coated,Trust 45mm External gate, Oil feed, water feed, water return lines (do not have oil drain line, Fittings are Proflow, Matching ETM Custom 4" V band dump pipe also Ceramic Coated, Screamer pipe, 4"chromed intake pipe (these items have never been used at all just fitted- $2300

- Custom 3.5"exhaust coated black from Oak Flats Mufflers with a cannon rear muffler. Exhaust was designed to be able to run both Screamer pipe and Plumb back in for road use ( block off plate). Cannon used but exhaust never used just fitted.- $700

- Custom ETM 1.5L Surge tank- $100

- Custom ETM Catch can, ( no lines or filter)- $80

- Custom ETM Airbox ( tig welded and press bent)- $80

- Custom Intercooler piping, with turbosmart 50mm BOV fitted on pipe tucked up behind headlight out of view - $450 ( can sell the complete intercooler system and BOV- $600

- Chromed air duct guide- $50

- Autronic SM4 Ecu, loom, Boost controller- $1500

- Autronic Cdi- $500

- Bosch 044 pump- $80

- K&N Pod filter- $50

- Full show interior, Recaro front seats. Everything top to bottom re-trimmed in beige leather. Dash and plastics have been chromed, 3 Gauges mounted on dash, blue EL Dials - $3000

- Gtr rear hubs and brakes- $350

Will go over the car and add items that i have missed coz im sure there are, with a long term build and so many parts keeping track of everything done is a nightmare, will also add pics.

As i mentioned earlier, most parts are still brand new although fitted.

Postage can be done, although the bigger items organizing your own freight would be great due to work/time commitments.

Prices are again negotiable but not giveaways otherwise she will just keep it all as it is.

Located on the Gold Coast QLD. Do have family in northside brisbane so if that makes it easier to meet up there with them that is fine. Also travel to Cleveland for work daily so again i can bring parts for a meet up in that area as well.

Cheers Guys

Ben.

PM on here is the easiest way to contact.

[yye-33w]

Hey do you still have the coils? And if yes would you take $100? I have a sister in logan who could pick up asap give me a msg back pls to [email protected]

[jarrod83]

do you still have the 4" intake pipe, air filter and heat shield? would you seperate them from the turbo?

Kind Regards

Jarrod