Jump to content
SAU Community

Recommended Posts

  • Replies 115
  • Created
  • Last Reply

Top Posters In This Topic

you probably were looking at the wrong time Nismoid - mine shows up as 98 when the needle on my speedo is 100. I have done this test at least a dozen times in the last year and it always says 98 if I am on 100.

Maybe your cars' speed sensor is stuffed...or maybe your looking at the wrong lane reading...

:shrugs:

It works for me.

yeah fair enough,

when you are in heaps of traffic its sometimes hard to workout which one is yours!

also last time i did mine the car next to me was sitting on the same speed but his registered at 101 or something...oh well.

As long as your speedo is under and not over then you are better off!

I'd rather my actual speed be like 95 when i am sitting on 100 than say 105, cause you could cop a fine, so to speak :)

it's outta whack.

TRUST ME!

Andrew and i, then Nathan and i have been through it... and it was FAR from reading what the speedo was.

That meter is on drugs

Dude, I used to drive past that thing 3 times a week on my way to work. It is accurate!! It reads 100 when my speedo is dead on 100...

Nope! it dont!

I've been in two cars little traffic (read:no cars near us) and it was reading weird!

Maybe a bunny rabbit tripped it off or something ?

Meh. I dont care. Speed Camera's aint accurate... speed detectors wont be either

Danny, is this happen to be the one near the St Vincent Hosp?

Funny sign with a :stupid: when u're under and a :starwars: when you're over he he he

I had a sign tell me off for doing 51 today in a 50 zone and then compliment me for slowing down!! Stupid sign!

This one is in a back street in Dandy nth/Noble park and displays text like TOO FAST! and WELL DONE!

I want to change the program to SLOW DOWN YOU IRRISPONSIBLE ****NUT and TOO SLOW YOU DOUCHE!

The speed meter thingo was 2 km/h off what my speedo said when i went through on the cruise. I checked my speedo with a handheld gps a few weeks ago and it was always correct give or take 1km/h. So i think my speedo is pretty accurate and that the speed measure thing is pretty accurate too.

I think the government should put in a bit of the money theyre making from all these fines into building a few more of these speed measurers, it would be great to be confident that when youre doing 103km/h that ur not going to be booked.

Guest
This topic is now closed to further replies.



  • Latest Posts

    • Bit of an update to this one. Having some issues on the dyno that held us back (boost spiking) and I want to pass some info over you guys and see what you think is wrong with my setup. The current readout on this dyno is 462rwkw on a low reading dyno so keep in mind it is a real world 500rwkw setup on a hub dyno. Don't read into the power figure too much as a sign of the issue. The short and curly of it is: 2.8 Litre Racepace build RB25 NEO N/A Head with VCT (internally standard however ) Borgwarner EFR 8474  Turbosmart 50mm Straight Gate + Mac valve 6Boost Manifold 4" dump to full 4" exhaust (nil restrictions) Wastegate plumbed back in and all angles in the exhaust system are acceptable and not too sharp. GFB SV52 BOV in cooler piping  Turbosmart BOV in EFR Housing   The issue we are having is it comes onto full boost for example at 4000rpm and spikes to 24/25psi, before dropping down to 17psi before slowly rising back up to the target boost of 23psi. It was extremely uncontrollable and the tuner actually had to ramp in boost progrssively with each 1000rpm on each boost setting we selected to try and reduce the amount of spiking. Sometimes we would see a drop of 10psi from the peak at the beginning of the run, to the low, until it took the next 500-1000rpm to stabilise back up to the target boost. The tuner is pretty confident that the straight gate is just a poorly designed product and leaks too much boost upon cracking the gate open and theres no way to fix it other than going to a poppet valve. He's also confient theres no ignition breakdown or floating valves. The fueling is extremely stable as well. Turbo speed is somewhere around the 109,000rpm area. The spanner in the works for me is that prior to this Borgwarner and StraightGate, the car was tuned on -5 twins at a diferent tuner, and he also had issues controlling the boost with it spiking around the same rpm range, so to me this sounds like the same issue and it can't be anything on the turbo side as this was all changed and I think the behaviour is extremely similar, if not the same. We also removed the mac valve and did a run on wastegate pressure and it still spiked and had the same behaviour. My thoughts on possibilities are: Boost Leak VCT Cam Gear isn't reliably activating consistently - (On this however, we did a run with the VCT disabled and the boost still spiked) Turbosmart BOV is not handling the boost? However this seems unlikely to not be able to handle 20psi. I have a couple of logs that I can't make sense of if anybody knows how to read them and can obtain further logs of other parameters if they are not enough, happy to pay for anyones time. The dyno readout with the power figure is the most recent last week. The other picture is from two weeks prior to that where we couldn't break 400kw (we removed the cat), however the issue of the boost control persisted. @Lithium @Piggaz @burn4005 @GTSBoy @discopotato03 I've tagged those that were quite active in recent pages here, no disrespect to those that know turbos well but I missed tagging. Cheers 
    • I recently purchased a 2018 Infiniti Q60, which has an SD card navigation map. I can see my system has options for real time traffic updates etc, and am wondering if there is something I can purchase to get this working? I can see there are at least updated maps for USA and Canada, but nothing for Australia. Surely Infiniti took changing road systems and city expansions into account when they decided to use an inbuilt navigation over Android Auto/Apple Car Play, or are we doomed to drive on streets that don't exist in the navigation system if you drive to a new area?
    • Luckily I didn't put in etch primer as I just found out it's not compatible with my body filler lol. Also just need to sand the panel anywhere between 150-400 grit so I'm in the clear there. It does say to not apply to soft old paint, I assume that means paint that is flaking, peeling,etc
    • @dbm7 and @GTSBoy thank you both very much! will give that a shot!
×
×
  • Create New...