Jump to content
SAU Community

Recommended Posts

I have decided to sell my beautifully restored GT-R. This GTR has been babied and has only done 2000 km in last two years basically to just keep everything maintained. It has been kept undercover and has been a hobby as I have another vehicle. The car is in excellent condition inside and out. All parts have been replaced including-

New R34 GTR N1 turbines

HKS V-cam system which uses V-Cam Shaft (248' and valve lift 8.6mm)and controling intake valve timing from low to high rpm to make the highest performance for turbines.($9,000)This is one of the few GTR in Aus with this system. Torque of boost is enhanced substantially. This system was installed by Gavin Wood at Auto Tech.

New NISMO Stabilizer/New HKS Lower Brace Bar kit(front middle and rear)/New HKS timing belt/ New HKS slide cam pulley/Greedy timing belt cover/New KSP Adjustable Wheel Spacer

Apexi Power FC with Hand Controller

New Tein Coil Over Suspension with EDC (Electronic Dampening Control) inside the car, it allows you to change the dampening in the drivers seat.

Twin-Cat Sport exhaust with Valve controller, giving ability to control loundness from Drivers Seat

Replaced all bushes to Super Pro Bush Kit (drives like newz)

The body has been protected by Quartz Glass Coating with 3 year warranty.

Full burgundy leather interior with GTR emblem

18 inch Deep Dish Alloys

Alpine Audio System

New window mall

The vehicle has been totally restored and all parts only 2000km old

All receipts

$22,000 PRICE DROP-baby on the way

Ben 0414644098

post-81193-0-29038500-1296558303_thumb.jpg

post-81193-0-38136700-1296558522_thumb.jpg

post-81193-0-70055300-1296558561_thumb.jpg

post-81193-0-22138200-1296558588_thumb.jpg

post-81193-0-08167900-1296558640_thumb.jpg

post-81193-0-50689800-1296558730_thumb.jpg

post-81193-0-23884300-1296558760_thumb.jpg

Edited by ben.gtr
Link to comment
https://www.sau.com.au/forums/topic/352468-r32-gtr-v-cam/
Share on other sites

what is that gtr emblem you have taken a pic of, is it embossed in the car somewhere?

what brand wheels is it running?

i'd also suggest higher quality external pics :)

leather actually compliments the car & works well with gun metal grey

Link to comment
https://www.sau.com.au/forums/topic/352468-r32-gtr-v-cam/#findComment-5660830
Share on other sites

Thought about trying to sell the V-Cam setup separate for 5k or something?....Then high teens for the car...someones parting out gets you bigger returns...good luck mate, its a tough market but there are buyers out there, patience.

Don't think a used V-CAM will fetch $5K anymore.

http://cgi.ebay.com.au/HKS-V-Cam-RB26DETT-Skyline-GTR-BNR32-BCNR33-BNR34-Step1-/140407524694?pt=AU_Car_Parts_Accessories&hash=item20b0f0cd56

Still impressive to see a r32 for that price with V-CAM though.

Link to comment
https://www.sau.com.au/forums/topic/352468-r32-gtr-v-cam/#findComment-5661076
Share on other sites

interested in this ride if still for sale in about a months time.... need to get loans sorted.... do you have any more external pics and also can you send a pic of the dyno tune sheet...

[email protected]

looks rediculously good for the price.........

  • Nope 1
Link to comment
https://www.sau.com.au/forums/topic/352468-r32-gtr-v-cam/#findComment-5665463
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey guys, so Golebys has good prices on Bosch injectors, and also sell an adaptor to go from 1/2 length injector to standard with the Nissan 10.5mm top seal.  Does anyone know if that adaptor is to suit the 14mm or 11mm injector tops?  And re. The bottom seal, to suit my standard RB20 intake, would I be right in saying I can just slip the 14mm square section O ring over the bottom of the new injector and done? Thanks in advance guy, Cheers, Rowdy
    • F my life. I was changing the oil on my R32 GTR today as usual and ran into a bit of a snag. I drained the oil out and was getting ready to finish the job by tightening the drain plug, however The stupid magnetic oil drain plug snapped in half, right at the magnet part. After about an hour of trying to remove it, I used a drill bit, which unfortunately pushed the magnet all the way into the pan, and just leaving the hollow threaded part of the bolt remaining. I was able to remove the hollow portion of the bolt from the oil pan with some pliers but the magnet is still in there.  So, the question is, should I drop the oil pan to get the magnet piece out, or is it okay to leave it in there? I really dont want to drop the pan, i'm about to go nuts.  PSA: Do NOT buy a BLOX magnetic drain plug. This is the one i had.    https://bloxracing.com/products/magnetic-oil-drain-plug-m12x1-25mm?variant=37131252859052&country=US&currency=USD&utm_medium=product_sync&utm_source=google&utm_content=sag_organic&utm_campaign=sag_organic&gad_source=1&gclid=CjwKCAjw47i_BhBTEiwAaJfPpgti1D2JwO7TDuMpXuqeQPCuIQSAfwxpWQH5rF9MD7sm5SCZDWLR_RoC_YoQAvD_BwE    
    • I actually have an aftermarket hanger, the detschwerks x1 hanger, but my dw420 has never really sat in it correctly, good to know I can just modify it a bit to suit. Yeah cheers man will definitely have a play with it and hope it solves my dramas.
    • Seriously though, it's the Shaft Autoservice high mount rear spoiler: https://az-style.shop/items/5ffaad5a72eb464137a6edb1
    • That's the 'low downforce' version of this:  
×
×
  • Create New...