Jump to content
SAU Community

290Rwkw S14 Sr20 - Built For Track/show/street

wanderer
 Share

Recommended Posts

wanderer Explorer

wanderer

Posted
Posted (edited)

Year: 1995

Make: Nissan

Model: 200sx

Body colour: BMW chamapge yellow bare metal respray

Price : $26,000 firm - may take part trade for a decent neat car up to 12K

Email [email protected]

Call : 0421647765

ENGINE (ie. RB26DETT):

Maximum power output (including RPM): 285RWKW @ 7400rpm

Engine Lubrication System: Redline Synthetic oil

Engine Cooling System: Aluminium radiator, 100mm intercooler

ENGINE INTERNALS

(PISTON ENGINE ONLY)

Crankshaft:

Conrods: Eagle H-Beam Rods With ARP 2000 Bolts

Pistons: CP Forged Pistons With Rings 86.5mm

Static Compression Ratio:

Rings:

Camshaft(s): Custom secret grind from gabby @ ProForm, same as his 10 sec motor package

Lift:

Duration:

Lifters:

Rocker Arms: tomei rocker arms and stoppers

Cylinder heads:

Valve springs:

Valves (and Size): Solid Valves

Intake:

Exhaust:

INDUCTION

Turbocharger/supercharger: Gt3076R which maxed out @ 19psi

Specifications:

Boost level: 19psi

Wastegate: external turbosmart 50mm with screamer pipe

Manifold: custom exhaust manifold with dual supplies to external gate

Air intake: Z32 AFM

Filtration system: K&N pod in custom enclosure

Inlet pipe:

Intercooler

Brand: No name

Type (eg. Tube and fin): tbe & fin

Dimensions: 600x300x100mm

Mounting (eg. Front-mounted): front

Piping (inlet/outlet): 3

Silicon hoses:blue

Throttle Body (Type/Size): 90mm too big I know

Plenum Chamber: custom with trumpets inside

FUELLING SYSTEM

Fuel storage:

Fuel supply (pumps, cells, swirl pots, rising-rate fuel pressure regulators etc.): bosh in tank pump, external surge tank, external bosh, custom fuel rail, 1000cc injectors,

Fuel filtration:

Ignition System: Spitfire coils

Engine management system: Power FC

Controllers:Apexi RSM

Who did your engine work? Adam my mate built the motor, gabby from proform specd the motor & did the machining, Ricol finished it all and made the exhaust manifold & tuned it.

EXHAUST SYSTEM

Extractors/headers: custom by Ricol, twin feed to external gate, ceramic coated

Flex:

Catalytic converter: hi flow, 3

Systems construction (eg. Stainless Steel): stainless exhaust

Mandrel bent (Y/N): Y

Resonator(s) (no/brand):

Muffler (make/model): canon - varex

Tip(s): 5

DRIVETRAIN

Gearbox: stock

Pressure plate: 1100kg custom

Clutch type: 5 button excedy

Flywheel: lightened aluminium

Driveshafts: stock

Axles: R33 GTST

Tail-shaft: R33 GTST

Differential: R33 GTST

Final-drive ratio: 4.11:1

BRAKES

Front: 8piston with 350mm floating disks

Rear: stock

Booster: stock

Booster bracket: stock

Brake pads (F/R): G4

Lines: braided

SUSPENSION/CHASSIS BRACING

Front suspension (brand/model, struts/springs/coil-overs): G4 coilovers

Rear suspension: G4 coilovers

Strut brace (F/R): nil

Swaybars (F/R): whiteline front & rear

Roll cage: NEXT to come !

Amount lowered from standard: 3

Other: pineapples installed to rear diff, rear camber adjustor arms

STEERING

Steering System:

Turning circle (if known):

Camber: -1 deg

WHEELS AND TYRES

Brand/make (F/R): WORKS

Model: SR1

Dimensions: 17 x 8 on the front & 9 on the rear !

PCD: 5x114

Front tyres: nexen 17x55x225

Rear tyres: semi slicks 17x50x275

YOUR CARS INTERIOR

Front seats: Bride ergo leather

Rear seats: black leather stock

Steering wheel: S15 leather trimmed

Gearknob: stainless

Gauges: oil temp, oil pressure, water temp

Boost controller: E-Boost 2

Turbo timer: apexi

Other: Nismo floor matts, leather door times & rear seat. Apexi PFC controller. Apexi RSM, indigo dials.

IN-CAR ENTERTAINMENT (ICE)

Stereo gear: Jensen TV, alpine 5 channel amp, kenwood 7x10, alpine splits, 12 sub

Other: custom boot enclosure, hiding surge tank and battery in boot. Fire extinguisher.

EXTERIOR

Front bar: vertex copy

Side skirts: edge copy

Rear bar: vertex copy

Paint (brand/colour): BMW champange yellow, full baremetal respray. Lipped guards.

Other: commdore side indicators, clear blikers, etc

post-12806-0-05823200-1296650368_thumb.jpg

post-12806-0-04049000-1296650605_thumb.jpg

post-12806-0-56354900-1296650627_thumb.jpg

Edited by wanderer
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Milkmun
      Magnetic Drain Plug Snapped in Half

      By Milkmun · Posted

      At least it was the ex.
    • Murray_Calavera
      Troubleshooting - motor wont turn over

      By Murray_Calavera · Posted

      Quick update.  The engine grounding strap was replaced, the engine is now happily running.  Tested the voltage drop before replacing the strap, was about 1.2ish volts down between engine to battery, chassis to battery. With the new grounding strap, pretty much no voltage drop at all. 
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      I was chatting with an ex SAU person who is involved in chooning euros now. He was saying the factory cars like Audi VW etc have something like 2000 tables that the ECU uses for getting everything "just right". Compare that back to any aftermarket ECU, and you'd be hard pressed to surpass 50 lookup tables. Even the Ford Barra engine has a few hundred lookup tables to run it (and they're still working some tables out too!)
    • MBS206
      Mistakes were made, my R34 Story

      By MBS206 · Posted

      Grab a temp probe, and probe each exhaust inlet runner with it sitting idling. Each one should be pretty darn close to the same temp. If you've got some reading higher or lower than the others, it's likely either air flow isn't equal, or your injectors aren't equal to each other.   The other things to check, is from the wiring changes that were made, were any earth's or grounds moved/changed.   Lastly, for the strut brace issue. It's not perfect, but can you get away with slipping a washer or two under the strut brace to raise it, and it still clean the bonnet? If you can, work out the height you need, that the motor can't torque up into, and get a spacer made for each side.
    • Victory
      Thanks Santa (the neverending trials of the 400,000klm, 400kw, RB30, manual swapped Stagea)

      By Victory · Posted

      That rusty R32 fuel tank is what we found in Clinton's R32. It has since been replaced with a R32 GTR tank and all it took was a bit of ingenuity in building new fuel tank hangers. I cannot believe how simple the R32 fuel level sender is compared to the R33 unit.
×
×
  • Create New...