Gtr Or Gts-T Front Bumper

[bortzy]

Hi guys I need some help!

I bought a new top secret front bumper off ebay for my series 1 r33 skyline gts-s. Unfortunately I didnt get around to attempting to install it for a few months later and found that the bumper was the wrong size. I think it is about 6 inches too wide (didnt measure at the time). After realising this i tried to contact the seller to no avail even though he is still selling the same kit on ebay (mybodykits)

Anyway i know there are differences between GTR front bars and GTS-T front bars. As such do you think that this is a GTR front bar?? Or does anyone know the dimensions of both bars?

Atleast if I can confirm it is then I can try to sell it such that I don't throw $300 away.

Cheers

[PM-R33]

If it is too wide than yes most likely it is for a GTR.

[ecliptor]

Hi guys I need some help!

I bought a new top secret front bumper off ebay for my series 1 r33 skyline gts-s. Unfortunately I didnt get around to attempting to install it for a few months later and found that the bumper was the wrong size. I think it is about 6 inches too wide (didnt measure at the time). After realising this i tried to contact the seller to no avail even though he is still selling the same kit on ebay (mybodykits)

Anyway i know there are differences between GTR front bars and GTS-T front bars. As such do you think that this is a GTR front bar?? Or does anyone know the dimensions of both bars?

Atleast if I can confirm it is then I can try to sell it such that I don't throw $300 away.

Cheers

I checked out the seller's bumpers and I'd say the problem is due to the fact the bumper you purchased is made of fibreglass, which 9 out of 10 times wont bolt up perfectly like a FRP bumper would.

[PSI Parts]

A GTS front bar should measure 175cm from mounting point to mounting point. From memory a GTR bar is 6 cm wider.

Just because it's wider than 175 doesn't always mean its a GTR bar though, it could just be a poor mould or stretched due to heat or catalyst composition.

[bortzy]

Thanks guys. I will have to measure it and see what the difference is.

It was definately far too wide and would have snapped if I tried to mount it