Rb26Dett Z31 200Zr *eoi*

[str00th]

**Out of Interest**

No I'm not interested in a swap unless that swap is your money for my car.

1987 Z31 200zr

Converted from RB20 to RB26

Dyno sheet proven 450+ RWHP

Specs -

Nismo Engine mounts

Sard - Fuel Regulator

SARD 700cc Injectors

C's Genuine Short Shifter

Nismo Oversize Clutch Slave Cylinder

Tomei Pon Camshafts 260 degree 9.15 lift

Tomei Adjustable Cam Pulleys

R34 RB25DET Gearbox

OS Giken Push Pull Converter

NGK iridium Spark plugs

Kyb Gas Adjust Shock absorbers

Kings Low Springs Front & Rear

Bendix Ultimate Brake Pads

Redline Diff and Gearbox oil

DBA 4000 series Slotted Rotors Front & Rear

R32 GTR Front Calipers (rebuilt)

Z31 Rear Calipers (rebuilt) last week

Braided Turbo Oil and Water lines

Bosch 044 External Fuel pump

Surge Tank (being pumped by standard pump)

Gates Timing Belt Kit

Tomei Expreme Dump Pipes

Tomei Expreme Manifolds

Axis 19" Wheels with Kumho KU31 Tyes

Garret GT2860R-5 x 2

89 Z31 5 stud front Hubs

PWR Custom 55mm Low Pressure Drop core Cross flow Radiator

Custom Drive Shaft

Custom Fuel hoses

Goodridge Braided Brake Lines

Greddy 1.2mm metal head gasket

Manley valves

Supertech valve springs

Lifter Shims

Custom Aluminum intercooler piping

4" Thick hybrid Inter cooler

3 inch joins from dumps into 3.5" Mandrel Bent Exhaust

Custom Aluminum radiator piping

Ross Nexus harmonic balancer

Davies Craig 16" thermo fan

Oversize Aluminum Fuel Rail

custom 3 way aluminum tank for Radiator overflow, oil catch and window washer liquid

820cca battery

Custom made wiring harness

z32 Speedo Sender

Greddy AiriNXII pod filters

ARP head studs

Wolf v500 ECU and sensors

Custom Alarm with immobilizer and remote central locking and built in turbo timer

OS Giken tripple plate Clutch Rebuilt by Nick Performance Clutch

OS Giken Flywheel Machined by Nick Performance Clutch

Custom Enlarged Sump to Hold 5L of oil

Custom Oil Pickup

Custom Gearbox mount

Splitfire Coil Pack

HKS CDI ignition

Custom Laser cut Dash

Fuel PSI gauge

Boost PSI gauge

Oil PSI gauge

Water Temp gauge

Oil Temp gauge

Fuel Level with Warning

Tachometer 10k with built in Shift light 200zr writing

Speedometer 260kmh 200zr writing

Steering rack rebuilt with bigger seals by ultimate power steering 2 weeks ago

Alpine 6" fronts

Alpine 6" Rears

JBL 12" 1600Watt Sub

Custom boot enclousure

Lanzar 2400Watt amp

Arnell 400Watt amp

JVC Head unit

Custom Respray Black with silver pearl only 2 months ago

Custom air vents fiberglass molded into front bar

3.5" Mandrel Bent Exhaust done at Fat Pipes

Twin Cannon mufflers

Custom Red and black interior

20OZR number plates

Serviced Religiously every 5000k with Penrite SIN or HPR with no exception

All work done by either Millenium Motorsport or myself and tuned by Carlos at Millenium Motorsport.

Engineered, Mod Plated etc over 100K total spend on parts and labour

Did i mention its hell fast and leaves XR6T's for dead? it drifts alright for what it is too

Anyone keen on the rarest and coolest thing since sliced bread?

email me on [email protected]

[rb30gtr]

that, is fantastic!

[Mickya]

delicious!

[fatz]

coupe of hundred hp less than my last on but that is farkenn hot

[fatz]

how much?

[str00th]

how much... well what i want for it and what im going to get or someone is willing to pay are two completely different things.

Ideally low 30k mark would be nice but i think I've got bucklys chance of getting it..

Offer if you interested?

[fez31]

Holyshit that's a sxc dash can I and how do I get that in my z31 vg30det the sheer beauty is actually bring tears to my eyes, my pregnant dog seen it and had its pups immediately....lol seriously amazing man great job

[str00th]

Well lets just say the dash alone probably cost me more then your z31 cost you lol

[fez31]

It cost u more then $1000 is it still a z31 dash I'm seriously interested in atleast gettin that cluster wld that b possible?

[fatz]

30k nasty

[ZED X]

HOOOOOOOOOLLLY SHIT, This is by far the most amazing thing i have ever seen.

I used to own a Z31, always wanted to drop an RB into it but gave up and bought my GTR instead.

Hope if/wen you sell this it goes to a good home, it looks amazing

[str00th]

It cost u more then $1000 is it still a z31 dash I'm seriously interested in atleast gettin that cluster wld that b possible?

Well, I'm not going to pull my dash out and sell it to you if thats what you're asking.

LOL its all custom and not stock Z31

If you want to have a dash the same as mine the cost is upwards of $5000

That's for gauges, laser cut dash, lights, wiring etc

Edited February 8, 2011 by str00th

[str00th]

30k nasty

Whats that meant to mean?

[Trozzle]

it means he's a moron and doesn't have appreciation for this work of art.

[str00th]

I thought so...

Well i saw a clean RX7 rims and kit with only 400hp for 60k maybe thats a better price range?

I have it listed on the American 300zx forums and they seem to think 40k is cheap and some are interested

[jahn-15]

Thats a weapon mate a friend has a 50th aniversary z31 and a tt z32 and a old z he is always trying to convert me over if i had the money id get this and really shoe him haha good luck with it

[fatz]

correct i know nothing

and you are 95% correct on the moron thing

[fez31]

Holyshit 5k to get that made up my engine rebuild, new ems, turbo and front mount isnt ganna cost me that much but I want it so bad

[str00th]

Holyshit 5k to get that made up my engine rebuild, new ems, turbo and front mount isnt ganna cost me that much but I want it so bad

well the gagues, last cut dash, lights, etc cost 2k or so then you got a lot of labor to install it all and wire it up

I could do it all for you for about 4k i reckon, if i had all the parts and started on a Friday night, it would be done by a Sunday night

Edited February 8, 2011 by str00th

[str00th]

Ok, after getting some idea's of what its actually worth im going to start with 25k ono