Jump to content
SAU Community

Recommended Posts

Nah it wasnt when I found it I maybe think that its was an old windscreen washer line as my car has a carbon bonnet maybe it just fell in there when they removed the old bonnet maybe not sure I'm thinking the air flow meter is had it and needs a new one and the trouble code cleared on the ecu ! Anyone in Perth got hook ups for new air flow meter ? cheers Tom

um duno man thats just how it came when i got the car mate

Yeah that is certainly an issue, really doubt it is what is happening here but it means on boost your crank case is getting pressurised, will cause excessive blow by and could blow your dip stick out if tracking the car.

You should get that stock hose on the right had side cam breather shown in the other setup, and connect it back into the intake on the right where its been blocked off.

Yea the solder joints looked pretty dry so re did them and re sealed up the air flow meter car still idles a bit funny and seem to be spitting a bit of black oily stuff out the exhaust what does that mean ? I need to take it in to mechanic ive done most of what I can at home it frustrating as the car is for sale and a guy wants it pending loan approval Ive told him its not running right but he still wants it id prefer to sell it running sweet but just see what happens if it falls through its going to mechanics to get sorted asap

Can I run two small breather filters instead of that pipe ??

thanks for everyones help

cheers

Tom

run 1 breather but on the end of a hose and have the filter under the airbox.

the black spits from the exhaust are normal, its condesation build up mixing with the soot in the exhaust.

  • 2 weeks later...
  • 4 years later...

In order to fix your idle problem, i recommend blocking and repairing any vacuum lines, ( block any lines that lead to know were start the car listen for changes), look at a engine diagram of the vacuum lines on the net and find out were they go to, in some cases its only a matter that the carbon filter or other have been removed and its causing an air leak witch then relates to your rough idle ( it rectified my problem)

check for cracks on your coilpacks, heat spots on your leads, if degraded, replace with new ones, also remove the cover that covers the coil packs, its only their for looks really,and will trap a lot of hot air witch will lead to the same problem, just don't wash or be careful when washing the engine use compressed air and a cleaning spray, aside from that do all your basic things like air filter clean it, o2 sensor and so on, you will be amazed at how basic it is once you find it. hope that helps if not their are a few other methods that can be done ( usually the problem is staring you right in the face)

In order to fix your idle problem, i recommend blocking and repairing any vacuum lines, ( block any lines that lead to know were start the car listen for changes), look at a engine diagram of the vacuum lines on the net and find out were they go to, in some cases its only a matter that the carbon filter or other have been removed and its causing an air leak witch then relates to your rough idle ( it rectified my problem)

check for cracks on your coilpacks, heat spots on your leads, if degraded, replace with new ones, also remove the cover that covers the coil packs, its only their for looks really,and will trap a lot of hot air witch will lead to the same problem, just don't wash or be careful when washing the engine use compressed air and a cleaning spray, aside from that do all your basic things like air filter clean it, o2 sensor and so on, you will be amazed at how basic it is once you find it. hope that helps if not their are a few other methods that can be done ( usually the problem is staring you right in the face)

Really? The thread is 4 years old! Do you not think he had it fixed by now?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So the original radiator is leaking now. Looking at getting a fully aluminium one next. Am I correct in saying that the Series 2 Auto Stageas have a separate trans cooler from factory (located in between the rad and intercooler in my previous post/message).   Currently looking at Fenix $460, Blitz $700, GReddy $800, and KoyoRad $740. What are everyones thought on Fenix ( ive read a few comments saying theyre cheap Chinese rebrands etc and how their build quality is... well.. chinese...)  compared to the others? Worth the extra couple hundies?
    • Man, different parts but the same numbers is terrible @dbm7! And it doesn't help that most online shops don't list the part numbers at all. They just give a list of compatible models...
    • Slow when hot could also be because its getting more dynamic compression, OR things are getting a bit tighter once it is all expanded. If it were an earthing issue, typically I'd expect you to have it have issues all the time. Unless it's really a combination of both things. Where the higher compression, and things being a bit tighter, is giving that bit of extra load and you do need a slight clean up on the cables/connections.
    • Yeah, this is one of the most annoying things about nissan part numbers... I've got an unrelated example... Image is of the AT output shaft ~ they have the same part#, but clearly the shaft on the left is beefier design to that on the right ...the difference (essentially) is the 'lighter' shaft on the right, is for engines up to RB25DE (this includes RB20 variants) : the shaft on the left is for RB25/26DET(T)....are they interchangeable? Yes...but obviously one shaft is going to be stronger than the other...and, the lighter shaft is around USD115, but the heavier shaft closer to USD150...same part#... ...epc-data usually tells a tale ~ the amayama listing for 39100-23U60 has a note "Longest side is between 60 and 105 cm" ; no such info is there for 39100-23U70 ...and given the great disparity in price between the 2 parts, it makes me at least curious (to the point of caution) where the 'extra money' went? ...ie; these 2 parts have a cost difference that (to myself at least) isn't explained by 'plastic boot'...ie; with amayama there's AUD700 price difference ...plastic versus rubber?...I'm not seeing it like that...and 60cm ~ 105cm...??...that's a huge disparity....something hinky going on here... I'd try searching by VIN, not model... /2cents
×
×
  • Create New...