HKS26T Posted February 7, 2011 Share Posted February 7, 2011 Hi guys, thought i should post something as the-lowdown have done a fantastic job in taking pics to cover my build My current specs that i currently wish to run to take me to WTAC 2011 is below Specifications List (as of January 2011): HKS T04z Turbo Kit HKS 264deg Step 1 cams Tomei Type B Springs/retainers/buckets Oversized Valves and guides OS Giken Cam gears Port and Polish Trust Greddy Pistons N1 conrods shot peened Tomei Oil Pump N1 water Pump ATI 1000hp harmonic balancer Jim Berry Full monty clutch Endless Single throttle plenum HKS fuel rail with Sard 1000cc inj Sard Twin pump surge tank ARC water to air Seperator Greddy Radiator/ Oil Cooler/Intercooler Aragosta Suspension Ikeya lower/upper/front/rear/ rods etc Cusco Front/rear Sway bars Cusco 1.5 way rear diff Greddy 355mm 6 pot Front Brake kit Safety 21 8 point roll cage Bride seats with Takata Harness Haltech Platinum Pro Plug in Haltech IQ3 GPS dash with full data log 18×10.5 Volk CE28ns 285/30/18 Yokohama AD08s FULL STORY Please leave positive comments on the site as they are using this as a measure for future coverage AND so they can continue to take the awesome photos of the car I have booked a spot for next month's SAU meet - motor is still out of car - whole heap of parts in transit FUN FUN FUN !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! Link to comment https://www.sau.com.au/forums/topic/353128-r34-skyline-gtr-vspec/ Share on other sites More sharing options...
N1GTR Posted February 7, 2011 Share Posted February 7, 2011 Approved. Side note, can you please tell me the sizes and offsets for the rims on that black Supra? Cheers Link to comment https://www.sau.com.au/forums/topic/353128-r34-skyline-gtr-vspec/#findComment-5660254 Share on other sites More sharing options...
NXTIME Posted February 7, 2011 Share Posted February 7, 2011 Very nice spec list. Will go and sound even better. PS, that plenum isn't an Endless item. Link to comment https://www.sau.com.au/forums/topic/353128-r34-skyline-gtr-vspec/#findComment-5660442 Share on other sites More sharing options...
HKS26T Posted February 7, 2011 Author Share Posted February 7, 2011 Rims sizes on the black supra are 19x9.5 +12 19x10.5 +12 "PS, that plenum isn't an Endless item. " Not sure what your policing NXTIME ?? can you please shed some light? I hope it is at least cause i paid alot of coin for it back in the day http://www.greenline.jp/catalogue/fullimage.php?path=engine/images/endlessrsupersurgetankgtr-BIG.jpg&brand=ENDLESS-R&name=Super Surge Tank&car=Nissan Skyline GT-R BCNR33 (RB26DETT) Link to comment https://www.sau.com.au/forums/topic/353128-r34-skyline-gtr-vspec/#findComment-5660524 Share on other sites More sharing options...
JAGR33 Posted February 8, 2011 Share Posted February 8, 2011 Subscribed, nice work Steve, very much looking forward to this build. Surprised your not going extra cc's to push that t04z.... Either way good luck with it all.... 1 Link to comment https://www.sau.com.au/forums/topic/353128-r34-skyline-gtr-vspec/#findComment-5660575 Share on other sites More sharing options...
fatz Posted February 8, 2011 Share Posted February 8, 2011 that is nice Link to comment https://www.sau.com.au/forums/topic/353128-r34-skyline-gtr-vspec/#findComment-5660576 Share on other sites More sharing options...
Beer Baron Posted February 8, 2011 Share Posted February 8, 2011 looks awesome mate. who is doing the build for you? hope it goes as nicely as you hope it will. Link to comment https://www.sau.com.au/forums/topic/353128-r34-skyline-gtr-vspec/#findComment-5660879 Share on other sites More sharing options...
HKS26T Posted February 8, 2011 Author Share Posted February 8, 2011 Subscribed, nice work Steve, very much looking forward to this build. Surprised your not going extra cc's to push that t04z.... Either way good luck with it all.... Shhhhhhhhhhhhhhhhhhh .... have a friend with a 2.7L and similar setup i would like to see both cars on the dyno and track then review. This will decide what treatment the spare bottom end gets. Beer Baron - Engine building is done by Chris Abes, not sure what his title is, ex C&B engineer/builder? He has built both motors currently in the Tilton EVO and BSM GTR. All other work done to the car is by Matt @ F&E Autoworks Link to comment https://www.sau.com.au/forums/topic/353128-r34-skyline-gtr-vspec/#findComment-5661152 Share on other sites More sharing options...
tm_r33 Posted February 8, 2011 Share Posted February 8, 2011 will follow closly mate. looks to be an awsome build so far Link to comment https://www.sau.com.au/forums/topic/353128-r34-skyline-gtr-vspec/#findComment-5661364 Share on other sites More sharing options...
N1GTR Posted February 8, 2011 Share Posted February 8, 2011 Rims sizes on the black supra are 19x9.5 +12 19x10.5 +12 Cheers! Link to comment https://www.sau.com.au/forums/topic/353128-r34-skyline-gtr-vspec/#findComment-5661926 Share on other sites More sharing options...
Beer Baron Posted February 9, 2011 Share Posted February 9, 2011 Shhhhhhhhhhhhhhhhhhh .... have a friend with a 2.7L and similar setup i would like to see both cars on the dyno and track then review. This will decide what treatment the spare bottom end gets. Beer Baron - Engine building is done by Chris Abes, not sure what his title is, ex C&B engineer/builder? He has built both motors currently in the Tilton EVO and BSM GTR. All other work done to the car is by Matt @ F&E Autoworks sounds good mate. can't doubt his pedigree then as both the tilton evo and BSM GTR are top shelf cars. I thought BSM built their own engines though speaking to Jeff but not everyone is 100% clear all the time and Jeff is pretty hard of hearing these days!! I'm running a jun 2.7 in my car now too but with little HKS 2530s. tempted to switch to something single but about to start some testing on some new turbos so will see how they perform. Link to comment https://www.sau.com.au/forums/topic/353128-r34-skyline-gtr-vspec/#findComment-5662849 Share on other sites More sharing options...
HKS26T Posted February 14, 2011 Author Share Posted February 14, 2011 Subscribed, nice work Steve, very much looking forward to this build. Surprised your not going extra cc's to push that t04z.... Either way good luck with it all.... Hey Jack, i noticed your selling the BBS's - any clearance issues with 285 rubber on your car? or anybody who can answer this i have ordered some 295's Beer Baron - Let me know if your interested in parting with the 25/30's Link to comment https://www.sau.com.au/forums/topic/353128-r34-skyline-gtr-vspec/#findComment-5669434 Share on other sites More sharing options...
JAGR33 Posted February 14, 2011 Share Posted February 14, 2011 Hey Jack, i noticed your selling the BBS's - any clearance issues with 285 rubber on your car? or anybody who can answer this i have ordered some 295's Steve, no clearance issues with the 285's, have run them with 10.5'' ce28n's aswell without issues. What profile are the 295's? 30? I'd be weary with that width on a 10.5 inch rim, make sure there isn't too much bulge in the tyre, otherwise you will get sidewall movement reducing grip. It may be ok but just keep it in mind.... What brand tyre are you going to use? Link to comment https://www.sau.com.au/forums/topic/353128-r34-skyline-gtr-vspec/#findComment-5670372 Share on other sites More sharing options...
HKS26T Posted February 15, 2011 Author Share Posted February 15, 2011 Steve, no clearance issues with the 285's, have run them with 10.5'' ce28n's aswell without issues. What profile are the 295's? 30? I'd be weary with that width on a 10.5 inch rim, make sure there isn't too much bulge in the tyre, otherwise you will get sidewall movement reducing grip. It may be ok but just keep it in mind.... What brand tyre are you going to use? Profile on the tyres are 30 series - recommended rim width is 10-11 inch - i thought i would be pretty sweet with a 10.5inch rim. I did run Ad08's last year in 285's and had some scrapage in hard corners. Im running some Korean tyres this time round Link to comment https://www.sau.com.au/forums/topic/353128-r34-skyline-gtr-vspec/#findComment-5671101 Share on other sites More sharing options...
Beer Baron Posted February 15, 2011 Share Posted February 15, 2011 will let you know if I want to shift the 2530s but they are quite nice for now on the 2.7. it's running a motec and makes for a very responsive set-up. just needs some more power up top. love the BBS LMs jack. I have some on my other 32. would LOVE these for my new 32. hmmm. very tempting. one of my fav R32 wheels but they do suffer a bit in the brake clearance department. Link to comment https://www.sau.com.au/forums/topic/353128-r34-skyline-gtr-vspec/#findComment-5671337 Share on other sites More sharing options...
JAGR33 Posted February 15, 2011 Share Posted February 15, 2011 love the BBS LMs jack. I have some on my other 32. would LOVE these for my new 32. hmmm. very tempting. one of my fav R32 wheels but they do suffer a bit in the brake clearance department. Yeah I have always had a soft spot for BBS LM's, but I have too many sets of wheels and need to get rid of some. You'd be surprised at the room they have for brakes, the Alcon 6 pot 365mm rotor package fits under these wheels no problem, was shocked when a fellow member bought the brakes and was worried they wouldn't fit under his wheels, and his were 18x9 not 18x10.... Anyway, back on topic, any updates Steve??? Link to comment https://www.sau.com.au/forums/topic/353128-r34-skyline-gtr-vspec/#findComment-5672162 Share on other sites More sharing options...
johnbarry88 Posted February 16, 2011 Share Posted February 16, 2011 sounds nice wish I could see the pictures Link to comment https://www.sau.com.au/forums/topic/353128-r34-skyline-gtr-vspec/#findComment-5673082 Share on other sites More sharing options...
natett Posted February 16, 2011 Share Posted February 16, 2011 so this is the car Shane has been babysitting previously. looks good! Link to comment https://www.sau.com.au/forums/topic/353128-r34-skyline-gtr-vspec/#findComment-5673503 Share on other sites More sharing options...
HKS26T Posted February 17, 2011 Author Share Posted February 17, 2011 Hey guys, yes this the the car that the gorilla supra babysat whilst i found the courage to break it to the mrs that this car is going to be around for good. SLLOOOOOWWWWLLLLYYY proggressing. Didnt realise there was so much shit to do and put back together after you spray a engine bay. Time is of the essence as i need this thing tuned late next week to make the NSW sau track day on the 5th March. I would like to overlap the results of this turbo setup with my mates -5 on a 2.6L and gtrs on a 2.7L Im hoping that the shorter diff ratio with the six speed will make this car much more lively on the track - can anyone comment on this? Heading into the workshop today to try and tinker with it. (It doesnt help when the mechanic is on cloud nine with his mrs and can only think about closing the shop at 6pm everyday LOL ) Link to comment https://www.sau.com.au/forums/topic/353128-r34-skyline-gtr-vspec/#findComment-5676238 Share on other sites More sharing options...
JAGR33 Posted February 17, 2011 Share Posted February 17, 2011 Good to hear Steve, surprising how much you got to remove to respray an engine bay. Short ratio duffs will help acceleration, but interesting to see how you would go at EC, long straight will test your car's gearing, just keep in mind you might reach the limiter in 6th before turn 1. Would definitely suit Wakefield though.... Where is the SAU track day? Link to comment https://www.sau.com.au/forums/topic/353128-r34-skyline-gtr-vspec/#findComment-5676250 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now