Jump to content
SAU Community

Recommended Posts

Clearing out the shed, pre-empting the sale of the Stagea.

I'm sure we've all seen videos like this:

Bought these lights to have a go at a DIY LED tail light project but don't have the time/patience/passion to continue with it. I got as far as removing the back from one of the inner lights and gathering a couple of wiring diagrams from Japanese owners - have included the one I can find on my pc in case anyone wants to have a go themselves. I have 4 sets in total, with the plan being to start modifying the poorer lights and work my way up to a mint (and amazingly cool) set of perfect condition lights.

All lights are located in Adelaide. Prices do not include the cost of post.

http://minkara.carvi...08809/note.aspx

First set is perfect condition with a factory white boot trim piece too, has bulbs and looms. $350

100_1569.jpg

Second set is also in very good condition, has bulbs and looms. $300

100_1570.jpg

Third set is clean but has a slight scratch to the left hand side inner, has bulbs and looms. $250

100_1571.jpg

100_1572.jpg

Last set is my first trial modifying set. I have dismantled the inner lights and cut out the back of left hand side inner, but you could always just glue it back in place if you wanted a cheap set of lights. The right hand side outer light has a slight crack in the lense. The inner lights have bulbs and looms but the outers do not (use your current ones). $150

100_1573.jpg

100_1574.jpg

100_1575.jpg

100_1576.jpg

p7.jpg

Link to comment
https://www.sau.com.au/forums/topic/353153-series-2-tail-lights/
Share on other sites

  • 2 weeks later...

long shot but are you willing to sell a set of inners only?

may do from the cut set - which one were you after?

How much for shipping to Hamilton, New Zealand for one of the sets.

I've never shipped anything overseas, anyone know how i'd go about it? just use auspost?

I have had items sent to me with Auspost via air mail international but would prefer Express post international as it is tracked. Any shipping company that gives you a track and trace number should be fine. If in doubt theres allways Fedex (usually dearer than the post but quicker).

may do from the cut set - which one were you after?

I've never shipped anything overseas, anyone know how i'd go about it? just use auspost?

both LH & RH inners.. How much including postage to 4017?

  • 2 weeks later...
  • 3 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Before I commit to it as I already have the wastegate off the car, would you change it to the 9psi spring instead of the 12, or whack it back on now and try your suggestion?   Edit: Actually I might just swap the spring and see what the logs say after another few pulls, as we know it's still spiking without the Mac valve in the picture so I need more data without the Mac valve trying to combat the issue.
    • Sounds good Hmm suppose the main thing is, how much do you care about this car? The filler doesn't make for a very good water barrier lol. If there was a tiny little bit of rust forming now, that in 3 to 5 years time becomes obvious under the paint (starts to bubble up), would it bother you? 
    • I already have the ability to datalog the voltage... what I can't do is correlate it to what the gauge is showing when I'm looking at the data at a later date. Or something like this. Except getting the oil to 125C+ involves me going 200+kmh at the track so you can imagine this is a little tricky unless I do something like note what the voltage is when I am at the top of 5th gear so I have a point to reference on. Drove car today. O2 still reading richer because hopefully not a leak instead of massive restriction I've introduced. Car really doesn't sound like a LS. It's quite strange. Pulled a bit of fuel out up top. This does potentially explain why my spark plugs looked like the car was running pretty over-rich. If I was tuning it to a ~12.7 which in reality was far richer than that in the past. It will be handy to have the dyno WB to compare my WB to to compare notes that's for sure. At this point I'm happy to just sit in the passenger seat and tune the thing given I've got about 7 million hours on the platform lol.
    • Yeah I understand you have to pay for an updated map or subscription service or something. But I can't even find a current map for Australia. My map is dated 2017, but didn't this car version still sell in Australia until 2021?   Also, just as an aside, the navigation system warns you of traffic incidences ahead.....why would they include that on a map they knew is not receiving live information. I am forever going to be warned of an incident that probably existed for 30 minutes 8 years ago.
    • Car has been sold and I am now selling leftover parts. Prices are non-negotiable as I will sell to my mechanic if it won't sell here. Prices are firm except for the Random Parts listed at the very bottom. All parts are genuine except for the S-Tune front bumper. Volk Racing TE37SL 19×10.5″ +12 5×114.3 pressed graphite with P-Zero 275 30 19 tyres [USED] $4,500 Wheels are in perfect condition, have been sitting in my garage for the past 6 years. Tyres still have 90% tread, but since they're now old, I would not recommend you drive hard on them. K-Sport Super Sport External Reservoir Coilovers (made to order) [NEW] $2,500 Front spring rate 14kg, Rear spring rate 7.5kg Fork Type. You can read all about it here (https://www.k-sportracing.com/product_detail.php?Key=12). I was going to start tracking the GTR, but never got around to it. Paid $3500 (after USD conversion and taxes). HKS Kansai Service Tower Bar [NEW] $500 Never fitted in the original Japanese box. R34 GTR S-Tune Fibreglass Bumper [NEW] $500 No mesh - No Box - No damage - just dusty. Nitto RB26 Clear Timing Cover [NEW] $50 Couldn't fit RB2630 due to bonnet clearance. HKS Piping Kit Special Type (BNR34) & Apexi Power Intake Air Filter Kit & Password JDM Adapter [USED] $1,000 Missing some rubber hoses and supports, but you get what you see. Nismo NE-1 Weldina Turbo Back Exhaust & Custom 3.5"straight pipe [USED] $1,000 Needs some love, but perfect for those who want to go back to OEM+. Bayside Blue Aluminium Vspec Bonnet/Hood [USED] $700 Came off my GTR. Unfortunately, the tips have been slightly ground down. It will need some repairing. Bride Low Max Super Seat Rails [USED] $350 The price is for both sides. Will post pictures when I get a chance. Random Parts [USED] - negotiable Standard rb26 cams (intake and exhaust) $10 Stock amber front indicators $10 Standard GTR bumper lower side grills $10 Stock amber side indicators $10 Nismo Sports Resetting ECU $50 Water reservoir $10 Stock airbox mouth $10 Stock fuel rail $10 Stock coilovers from R34 GTR Vspec $100 PM me which items you are interested in. I do work 9-5, so I will be responding daily at best. Best time for pick up is after 5 and before 7 on weekdays, or i can work something out on weekends. I will only accept cash or PayID. Pick up only - located Epping NSW area.
×
×
  • Create New...