Jump to content
SAU Community

Axis Hiro Wheels - 19"

Bourbon Boy
 Share

Recommended Posts

Bourbon Boy Community Regular

Bourbon Boy

Posted
Posted (edited)

For Sale: Axis Hiro Wheels

Diametre: 19"

Width: 8.5" Fronts - 10.5" Deep Dish Rears

Offsets: Fronts: +45 (ET45) - Rears: +40 (ET40)

PCD: 114.3

Wheel Condition:

Good Condition

Colour: Silver Trim\Dish with Grey Spokes.

Minor gutter rash: Front Left & Rear Left

Minor chips on bolt hole: Rear Left

Does not come with wheel nuts

Tyre Condition: Front: 245/35/19 - Rear: 275/30/19

Brand: Kumho Ecsta SPT

Both Fronts: approx 30000km

Rear Left: approx 15000km

Rear Right: approx 1000km

Free Spare tyre: Rear Right (275/30/19): puncture re-sealed: approx 15000km

Location: Sydney, Redfern NSW.

Pick up prefered or can arrange a meet with-in a 30km radius of CBD.

Price: $1500

Swap: Yes.

Looking for good condition light racing 18" wheels...

Fronts Widths: 8.5" - 9"

Rear Widths: 10" - 10.5"

Offset: As close to +30mm as possible all-round (not under +30).

Willing to pay the difference if its fair.

Please Post or PM if interested. Thanks.

post-74159-0-77845900-1297082773_thumb.jpg

post-74159-0-67033100-1297082797_thumb.jpg

post-74159-0-09869200-1297082820_thumb.jpg

post-74159-0-68847300-1297082838_thumb.jpg

post-74159-0-22002700-1297082980_thumb.jpg

post-74159-0-73715000-1297083118_thumb.jpg

post-74159-0-12038200-1297083137_thumb.jpg

post-74159-0-86149000-1297083161_thumb.jpg

post-74159-0-33565800-1297083188_thumb.jpg

post-74159-0-57314900-1297083203_thumb.jpg

post-74159-0-53298500-1297083209_thumb.jpg

post-74159-0-66935200-1297083244_thumb.jpg

post-74159-0-96235200-1297083262_thumb.jpg

post-74159-0-39617900-1297083276_thumb.jpg

post-74159-0-72229700-1297083309_thumb.jpg

Edited by Bourbon Boy
Link to comment
https://www.sau.com.au/forums/topic/353205-axis-hiro-wheels-19/
Share on other sites
  • 2 weeks later...
Blackzedder Apprentice

Blackzedder

Posted
Posted

Still for sale peoples... make me an offer - Swap or Cash!

Hi Bourbon

Rears look good. - I've got a V35 coupe (same as your pix). The fronts don't seem to come out any further into the wheel arch than the stockies. But the wheel would extend inwards and extra 28mm.

Do the fronts fit without using a spacer???????

Cheers Neil

Bourbon Boy Community Regular

Bourbon Boy

Posted
  • Author
Posted (edited)

Hi Bourbon

Rears look good. - I've got a V35 coupe (same as your pix). The fronts don't seem to come out any further into the wheel arch than the stockies. But the wheel would extend inwards and extra 28mm.

Do the fronts fit without using a spacer???????

Cheers Neil

Hey mate, sorry havent checked this for a while. Yes, the fronts fit as they are. No Spacers. Clears my Brembos just fine. Still for sale if you're interested.

Cheers,

Mike

Edited by Bourbon Boy
Bourbon Boy Community Regular

Bourbon Boy

Posted
  • Author
Posted (edited)

No Cash?? Willing to Swap for:

Carbon Fibre Bonnet & Carbon Fibre Boot Lid

OR

CF Bonnet & CF Front Lip

OR

Coil overs + Stock 370z wheels & Tyres

OR

CF Bonnet + Stock 370z wheels & Tyres

Combinations are endless! So Make Me an Offer! (Must Fit a 2004 V35 Skyline Coupe)

Edited by Bourbon Boy
WeaponV35 Contributor

WeaponV35

Posted
Posted

Hi there i wouldn't mind swapping for my 19 inch initial d rs gt matt black wheels. My misses bought it for xmas and the offsets are 40+ they put on the spacers as i am not keen on having them. They got no gutter rashes or nothing on them and the tyres are pretty much 99 1/2% tread i only had them on since xmas. Let me know im pretty interested :)

Bourbon Boy Community Regular

Bourbon Boy

Posted
  • Author
Posted

Hi there i wouldn't mind swapping for my 19 inch initial d rs gt matt black wheels. My misses bought it for xmas and the offsets are 40+ they put on the spacers as i am not keen on having them. They got no gutter rashes or nothing on them and the tyres are pretty much 99 1/2% tread i only had them on since xmas. Let me know im pretty interested :)

PM SENT!

Im not keen as I have other wheels now but i do have a set of the stock 370z rims and tires for sale for $1200 if ur interested.

Email me if your keen.

[email protected]

Mate if only your were in Sydney.

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Mitchp77
      UniClutch

      By Mitchp77 · Posted

      Hey @Butters, did you end up getting this clutch in ? I have just ordered to a uniclutch track to go in my getrag 6 speed that’s in my BNR 32     
    • Murray_Calavera
      NC MX5

      By Murray_Calavera · Posted

      I know you don't want to hear this comment, but I can't not say it.  I just can't see 200kw being worth the time and effort. Its like guys with NA cars, putting in headers/exhaust/tune for a massive 20% jump in power. Great, the slow car is still slow and you're down $10,000.  My vote is leave it NA or price in a gearbox upgrade and shoot for at least 300KW, preferably 350KW+.  Now you have a NC that will try to kill you from time to time and will be exciting to drive
    • Murray_Calavera
      How "plug and play" is the Haltech Pro for R33 GTST

      By Murray_Calavera · Posted

      Ah yep. The main message I want to pass on is, try not to get scared of ghosts when thinking about knock/knock detection.  What I mean is, healthy engines make noise. Knock is also noise. Your knock sensor and ECU combo are trying to determine bad noise from good noise based on how loud the noise is. The factory knock sensors and ECU are not good at doing this.  Modern ECU's are pretty decent at it, however I'd still say that you would want to verify that if your ECU says it's knock, that you actually listen to it and confirm that it is correct.  Are you familiar with the plex knock monitor?  https://www.plex-tuning.com/products/plex-knock-monitor-v3/ I expect you're the type of person that would be very keen to play with something like this. It is great knock detection and you can pop some headphones on and listen to what's going on.  Knock that you've deliberately induced in low load low RPM areas is not really putting anything at risk and is a great tuning/learning/verification tool.  I just thought this was worth mentioning based on the way you were talking about setting up a base map and the Haltech base map settings. There are better ways to spend your time then chasing ghosts and worrying about detonation in scenarios that it is crazy unlikely to encounter it.  I was also wondering, what ECU are you planning to get? Will it be long til you pick it up?
    • Milkmun
      NC MX5

      By Milkmun · Posted

      This came quicker than I thought. It ain't even 2025 yet.
    • Kinkstaah
      NC MX5

      By Kinkstaah · Posted

      I somehow quoted my post instead of editing it. I regret nothing.
×
×
  • Create New...