surlyjez Posted February 8, 2011 Share Posted February 8, 2011 Last night i went for a drive in my 32 gtst and was all fine one moment, accelerated hard and good on boost then all of a sudden at about 3000 rpm when the turbo starts to spool the engine started sputtering / cutting out / losing power and stalled, i then had trouble getting it started again, it is fine under 3000 rpm but the engine cuts out over that. The 32 is completely stock just changed the spark plugs 2 months ago. From what i have read it sounds maybe coil packs or fuel pump or afm??? Any ideas or tips to narrow it down? Cheers, Link to comment https://www.sau.com.au/forums/topic/353236-engine-loses-power-cuts-out-on-boost/ Share on other sites More sharing options...
BoyWhoCriedWolf Posted February 8, 2011 Share Posted February 8, 2011 Check for piping leaks first. Sounds like an IC pipe off somewhere. Link to comment https://www.sau.com.au/forums/topic/353236-engine-loses-power-cuts-out-on-boost/#findComment-5660909 Share on other sites More sharing options...
surlyjez Posted February 8, 2011 Author Share Posted February 8, 2011 already checked that, they seem all good. cheers Check for piping leaks first. Sounds like an IC pipe off somewhere. Link to comment https://www.sau.com.au/forums/topic/353236-engine-loses-power-cuts-out-on-boost/#findComment-5661304 Share on other sites More sharing options...
BOOZTJUNKEY Posted February 8, 2011 Share Posted February 8, 2011 Maybe coil packs but saying you can't rev over 3k makes me think dead air flow meter check ecu for errors codes to rule out sensor then check all rubber hose joiners and clamps ( joiners for splits and make sure clamps are tight) and check vacuum hoses for splits or blown off lines Link to comment https://www.sau.com.au/forums/topic/353236-engine-loses-power-cuts-out-on-boost/#findComment-5661477 Share on other sites More sharing options...
Bronx Posted February 8, 2011 Share Posted February 8, 2011 belive it or not, i actually put brand new NGK's into my car not even 1 month ago and i have run into the same problem. swapped for a new set and its all gone. just faulty spark plugs. go to just jap or so and buy a cheap set for 20 bucks, easy as. i bet my money on the sparkies Link to comment https://www.sau.com.au/forums/topic/353236-engine-loses-power-cuts-out-on-boost/#findComment-5661546 Share on other sites More sharing options...
surlyjez Posted February 8, 2011 Author Share Posted February 8, 2011 a mate reckons its the spark plugs as well, ill chuck in a new set on the weekend and check out the coil packs and vacuum hoses and afm. hopefully that sorts it out. Cheers Link to comment https://www.sau.com.au/forums/topic/353236-engine-loses-power-cuts-out-on-boost/#findComment-5661578 Share on other sites More sharing options...
surlyjez Posted February 14, 2011 Author Share Posted February 14, 2011 (edited) Changed the spark plugs this arvo still dies when it hits about 3k revs under load. Not sure what it might be. maybe coil packs or afm?????? any ideas anyone cheers, Edited February 14, 2011 by surlyjez Link to comment https://www.sau.com.au/forums/topic/353236-engine-loses-power-cuts-out-on-boost/#findComment-5670244 Share on other sites More sharing options...
Bronx Posted February 14, 2011 Share Posted February 14, 2011 (edited) guess it could be your coil packs then, doubt its the afm or a boost leak, sounds like a ignition problem, so guess your coilpacks cant charge fast enough to create a big enough spark for the high boost range, since low boost your compression isnt high enough for the spark to have difficulties jumping. find a spare pack of coilovers from someone, cause spending 500 bucks and finding out its not them, is a pain to. i have a spare set for a rb25neo engine and a set for rb26dett, but i dont think any of them fit your rb20... or while your at it, might as well change your fuel filter just to be safe. Edited February 14, 2011 by Bronx Link to comment https://www.sau.com.au/forums/topic/353236-engine-loses-power-cuts-out-on-boost/#findComment-5670390 Share on other sites More sharing options...
surlyjez Posted February 14, 2011 Author Share Posted February 14, 2011 i changed my fuel filter today as well with the new plugs. Ill try and find some coilpacks i can test out. Cheers, Link to comment https://www.sau.com.au/forums/topic/353236-engine-loses-power-cuts-out-on-boost/#findComment-5670409 Share on other sites More sharing options...
Bronx Posted February 14, 2011 Share Posted February 14, 2011 what gap you use on your spark plugs???? eventhough my car is stock, and only boosts to 7psi on high, i sometimes have trouble runnin 0.8mm gap, so i use 0.6mm...... kinda weird, but ive been told by most tuners that for forced induction cars should be gapped to 0.6mm Link to comment https://www.sau.com.au/forums/topic/353236-engine-loses-power-cuts-out-on-boost/#findComment-5670421 Share on other sites More sharing options...
surlyjez Posted February 14, 2011 Author Share Posted February 14, 2011 (edited) using 1.1mm gap on the spark plugs im running stock boost though. The car ran perfectly running 1.1mm before it started having this problem. Edited February 14, 2011 by surlyjez Link to comment https://www.sau.com.au/forums/topic/353236-engine-loses-power-cuts-out-on-boost/#findComment-5670425 Share on other sites More sharing options...
Bronx Posted February 14, 2011 Share Posted February 14, 2011 1.1mm???????? wow, my car wont fire past 2800rpm with that, and ive used diff types of plugs, used pulstars, cheap NGK, NGK platinum and iridium, also Autolite double plats. all had problems firing with 1.1mm gaps. guess you have some good sparkies??? when i uprated my coilpacks to the splitfires, i havent had problems firing 0.8mm gaps, but still 1.1mm under high boost. still choose 0.6mm though.... also im running heat range 7 from ngk, the 6 heat range always cracked for me. i swear to god my engine has its periods.... Link to comment https://www.sau.com.au/forums/topic/353236-engine-loses-power-cuts-out-on-boost/#findComment-5670437 Share on other sites More sharing options...
On Edge Posted February 15, 2011 Share Posted February 15, 2011 What is error code 21 an error code 23? Anybody know? I had one of them a while ago an could not diagnose it. Link to comment https://www.sau.com.au/forums/topic/353236-engine-loses-power-cuts-out-on-boost/#findComment-5671099 Share on other sites More sharing options...
bubba Posted February 15, 2011 Share Posted February 15, 2011 (edited) i have a spare set for a rb25neo engine and a set for rb26dett, but i dont think any of them fit your rb20... RB20 and RB26 coilpacks are the same, so are series 1 RB25. Edited February 15, 2011 by bubba Link to comment https://www.sau.com.au/forums/topic/353236-engine-loses-power-cuts-out-on-boost/#findComment-5671167 Share on other sites More sharing options...
surlyjez Posted February 15, 2011 Author Share Posted February 15, 2011 What is error code 21 an error code 23? Anybody know? I had one of them a while ago an could not diagnose it. i think 21 is ignition signal and 23 is idle switch Link to comment https://www.sau.com.au/forums/topic/353236-engine-loses-power-cuts-out-on-boost/#findComment-5672183 Share on other sites More sharing options...
surlyjez Posted February 15, 2011 Author Share Posted February 15, 2011 I think I have fixed my problem. What i did was take the afm out and spray some non residue leaving degreaser stuff through it and let it dry. plugged it all back in and at first it ran even worse but then i reset the ecu and it was all good. back to Better than normal. Hopefully it is all good now. Link to comment https://www.sau.com.au/forums/topic/353236-engine-loses-power-cuts-out-on-boost/#findComment-5672195 Share on other sites More sharing options...
surlyjez Posted February 15, 2011 Author Share Posted February 15, 2011 1.1mm???????? wow, my car wont fire past 2800rpm with that, and ive used diff types of plugs, used pulstars, cheap NGK, NGK platinum and iridium, also Autolite double plats. all had problems firing with 1.1mm gaps. guess you have some good sparkies??? when i uprated my coilpacks to the splitfires, i havent had problems firing 0.8mm gaps, but still 1.1mm under high boost. still choose 0.6mm though.... also im running heat range 7 from ngk, the 6 heat range always cracked for me. i swear to god my engine has its periods.... im using the cheap copper ngk ones now, before i had iridium bosch ones and before that had some platinum ones, but they were all gapped at 1.1mm and its always been fine. maybe ill try gapping them down to 0.8mm and see what happens. Cheers, Link to comment https://www.sau.com.au/forums/topic/353236-engine-loses-power-cuts-out-on-boost/#findComment-5672203 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now