Jump to content
SAU Community

Garage Cleanout - Volks, Jun Kit, Lsd, Ecu, Safcii And Ignitor


Recommended Posts

Hey guys,

I'm cleaning up to move and need to get rid of some stuff.

4 Volk rims - all with legal rubber. They are 17 x 8 and 17 x 9 and currently have 235's and 245's on them (you'd be able to go wider on the rear for sure). They are in good condition and don't have much gutter rash. All center caps and stud covers are there. They come with spacers to make them fit a skyline (they are the proper bolt in ones). I replaced them with some rota's so these have to go. Super light.

$550 ono.

post-14600-0-39527700-1297153972_thumb.jpg

post-14600-0-34686300-1297153993_thumb.jpg

post-14600-0-47859600-1297154012_thumb.jpg

post-14600-0-13561800-1297154032_thumb.jpg

Jun style bodykit. It probably need some work - but it was on the car when I bought it (I've changed it back to stock). The skirts have some scratches underneath and a small piece of filler missing but they'd be an easy fix if its your thing. The rear pods are excellent and the front bar - well I was going to use it as a track bar thus the lovely cable tie stitching.

Without the front bar: $100 ono

With the bar $150 ono :)

post-14600-0-78200100-1297154111_thumb.jpg

post-14600-0-52897400-1297154132_thumb.jpg

post-14600-0-91960600-1297154154_thumb.jpg

post-14600-0-34976700-1297154175_thumb.jpg

post-14600-0-57923200-1297154194_thumb.jpg

R33 GTS-T Diff in good condition. This was pulled from my car last night and replaced with a nismo unit, it still locks up fine and doesn't make any noises it shouldn't. Its got about 150k on it, but most of them were by my mate who drives like my dead grandmother. We pulled the rear cover off for a look and I would of put it back in.

$300 ono.

post-14600-0-96310200-1297154254_thumb.jpg

post-14600-0-07226300-1297154271_thumb.jpg

post-14600-0-43725400-1297154288_thumb.jpg

post-14600-0-97017700-1297154309_thumb.jpg

Stock R32 GTS-T computer - $100 ono

post-14600-0-28632500-1297154542_thumb.jpg

post-14600-0-10036700-1297154560_thumb.jpg

A'Pexi SAFCII. Brand new in box and never been used. To suit S1 R33 RB25DET Skyline.

$200 ono.

post-14600-0-72586200-1297154612_thumb.jpg

post-14600-0-71001400-1297154633_thumb.jpg

R33 S1 Ignitor - known working unit - $70

post-14600-0-07051200-1297154587_thumb.jpg

Either PM or give me a call on 0418 666 332.

Link to comment
Share on other sites

damn if only u weren't 5 hours away from me, i'd so grab the front bar off you. It has less cable ties than mine lol

I do a lot of travel - where abouts are you. If Sydney PM me. MY condition is you take the whole kit though :)

All stuff up for grabs (except the afc) :)

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share



  • Similar Content

  • Latest Posts

    • Hi there, after a quick google search I found this topic as I am also relocating the battery to the boot of my 1998 GTT. I was just wondering how you got on with installing the re-routing and specifically the installing of the harness protectors? How do they attach? Are they just a simple "click-in" affair, or do they attach with bolts? Does the GTT have all the necessary fixing holes for them, for example, where they locate on the chassis? Any help you can provide would greatly appreciated.
    • Thanks mate, yeah I've heard that alot and i am definitely regretting using the 25 Loom now, i have gone through and traced all the plugs from the 20loom and re wired them into the 25 loom, I have currently got Crank, Fuel and accessory's working, just need to finalise the loom and run the wire for the Ignition (Spark) and it should be running, will update if i have any luck.
    • Cheers lad, when I head over there I'll give it a shot.
    • Stock less likely to carry one like that than urethane, but still can, especially if the bolts are not as tight as they should be. If it's making that much noise you should be able to use a hose as a stethoscope> stick one end in your ear, crouch down and wave it around the various possible noise makers and get someone to lift the front end at the guard lip.
    • Broken actuator rod. Could be one of a couple of them broken. Or, it's locked and the central locking actuator is broken/stuck or the actuator rods between it, the lock and the key barrel are jammed or broken similarly. You'll probably need a locksmith/mechanic who is experienced with using slim tools to reach down next to the window glass to manipulate the mechanism. That's assuming that it is not so severely jammed/broken that nothing useful will move.
×
×
  • Create New...