Jump to content
SAU Community

Recommended Posts

Ok guys heres the story.

A few months ago i had a pretty stock R32 GTR.

Only mods where the exhaust, 33GTR N1 Turbos (not the BB type Garrett 2860-7) and a Boost controller. I Took it to the 1/4 mile and ran a best time of 12.997 @ 105mph.

Which i was happy with. Seemed right with those mods.

But then i decided to put a bit of extra stuff in. So i chucked in

2x Garrett 2860-7 turbos

Kelford 272deg cams + head work

Tomei cam gears

PE 750cc injectors

PE Kevlar timing belt

Walbro fuel pump

Tomei fuel rail

Stainless steel manifolds

Apexi dual intake kit

stainless steele radiator

Bee*R launch controller

and a power fc.

Got it all put in and the tuner did a rough Road tune with the PFC. He did suggest however that i get a dynotune. (but the powerfc i bought was already tuned for those turbos)

Now i just got back from the drags and after doing multiple runs, ran a best time of 13.451 @ 102mph. uughh. wtf?

Can anyone help me out?

Edited by NOCTIS
Link to comment
https://www.sau.com.au/forums/topic/353439-spent-8k-on-mods-only-to-go-slower/
Share on other sites

edit: Hmm just had a quick look. And i found quiet a large split in the intake hose that runs into the intercooler from the turbos.

Which would make sense cos i found i was losing alot of power in the higher rev ranges.

shit...

Iv been driving the car pretty hard all week. hope nothing else have fkd up on it.

Edited by NOCTIS

I count at least 6 items on your shopping list that were not needed and wouldn't have improved your horsepower.

Get the car on a dyno and have a proper tune done if you want to realise the full potential of your new setup, hoping for the best with a used Power FC that you were told was tuned for a specific type of turbo is a royal gamble.

+1 cams too big.

Realistically It feels more like you have simply tried to tune the car rather than perform any significant upgrate. I see the -7s as a steel wheeled stock turbo, not SIGNIFICANTLY better (people will hate me for the comment) and you already had that as such with the N1 turbos.

The only other power getters I see are the cam gears, manifolds and intake kit. The only one actually doing some work IMO is the cam gears which is negated by the oversized cams. The manifolds and intake kit would yield minimal results at best with the -7s.

All in all I would expect the current setup to be slower than if you had simply added the PFC + camgears.

Not to be a prick or anything, I hope you take the above as constructive and make some minor revisions to your efforts. Goodluck.

tuner did a rough Road tune with the PFC.

He did suggest however that i get a dynotune.

Now i just got back from the drags and after doing multiple runs

srsly... wtf are you doing man?

I'm not after 500hp+ that's why I went with the -7. The 33gtr n1 uses journal bearings which don't spool as fast as the 34 n1's. I swapped the manifolds as it was something I might as well do while the turbos are out anyway.

All I want Is a good balance between response and top end at around 400ps. Which is what I would have thought the -7s and the cams wouldv given me.

And the tune isn't that bad at all for your information. I just got recommended to get it dynotuned to get the most out of the mods. Not because it's going to blow up in my face if I leave it on idle.

+1 cams too big.

Realistically It feels more like you have simply tried to tune the car rather than perform any significant upgrate. I see the -7s as a steel wheeled stock turbo, not SIGNIFICANTLY better (people will hate me for the comment) and you already had that as such with the N1 turbos.

The only other power getters I see are the cam gears, manifolds and intake kit. The only one actually doing some work IMO is the cam gears which is negated by the oversized cams. The manifolds and intake kit would yield minimal results at best with the -7s.

All in all I would expect the current setup to be slower than if you had simply added the PFC + camgears.

-7's a big improvement over the N1's... they're listed as R33 N1's not R34 N1's

cam gears need to be dialed in on a dyno too (as well as a PROPER tune, but that's already been stated)

You ran a 13.0 at 105mph so that's normal for a 32 GTR with an exhaust.

So just tuning those N1 turbos with an aftermarket ECU would have got you good gains.

Since you went all out - then you'll need a tune, especially with those cams. Don't expect anymore overall power from the cams with those turbos, just a shift to higher rev range and less torque.

Yeh im booking it in for a dynotune right now, and just ordered a new pipe to replace the split one. Yeh I dunno. I was just excited to have the car back I guess. So I couldn't help driving it.

So I'm back to driving the bunky around now.

yeah not exactly a good result. my 32 with stock turbos, stock manifolds, stock injectors, stock cams, stock intercooler, basically 100% standard except for a cat back exhaust, 1 bar boost, and a well tuned power FC ran a 12.4 qtr mile. GET IT TUNED asap. it should be mid to high 11s at this point.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Well, I'm tired. I'm tired because about 4PM yesterday, before today's appointment someone immediately bought my bumper. They couldn't get it any other day as they're on the way back to NSW. So I had to do that big GTR conversion I had been planning. Unfortunately, the information on SAU about what you need and how this is done is incomplete. So what should be a simple bolt on affair, yeah, it's not. Did you know if you use all GTR items the bonnet won't close? This little manuever sent me into about 1am the night before trying to dodge a way to get it closed. I will have to revisit this in the next few days  - or maybe not, I may let a body shop figure it out. It all needs to come up and my motivation to pull the bumper off is low. It also seems to hit things in the bay where the GTT bonnet didn't. Yes I used 100% new OEM GTR items. Today, I had the joy of driving to the dyno looking like this: Given I had roughed in the fuel and given sensible but pretty conservative timing, I didn't really bet on having the car drive out any real difference than when it drove in. Sadly due to a miscommunication and laptop fun and games (and almost bricking the dongle, prayers and firmware updates indeed), I ended up using HP Tuner credits to licence the car that was already licenced. So in the end my laptop was used. It turns out my butt dyno is still well calibrated after all this time. The 325kw was on 74% Ethanol, the 313kw line was on 98. The other line is the 'before' line which was 281kw. While the numbers are pretty low, they're pretty in line with what you'd expect. Even if US dynos bump the whole result up about 50KW, gaining 10-15% is similar gains.  The curve of the cam is pretty much spot on with what was discussed as well. All this said, it still feels bad to not see the number you secretly want to see. Even if the car drove great beforehand, and I knew pretty confidently the car would drive out much the same way it drove in due to the nature of a wellish dialled in LS1 not gaining much if anything at all from being tuned from where it was. As expected, the car isn't particularly sensitive to running it at anywhere between 12.0 and 13.0 - And the initial timing at 20deg and 12.0 made 308KW. So 3 degrees of timing, and leaning it out to 12.7 for 5kw, anything above stopped giving any benefit until E85 (which has an additional 2 deg as before). Car itself behaved entirely fine. I found out that 100C = 1.15V! IAT at about 7pm was 19C. I might mess with the bonnet mounting.. but given the REO NEEDS TO BE CHOPPED TO FIT A GTR BAR this is possibly something I may leave gathering (more) dust until it returns to paint jail.
    • It sounds farrrrrrr too cold at your place Duncan... Here I was thinking our 10 degrees overnight is getting cold...
    • oh yeah, reminded this morning....bin lids frozen shut too
    • In my case not, because of total reno. But yeah.
    • Did you use an electronic speedo drive? Does you speedometer read all the way to 180km?
×
×
  • Create New...