Jump to content
SAU Community

First Speeding Fine. How Do I Get Out Of It?


Recommended Posts

Hey guys. I got a speeding fine in the mail about a month ago but with a 21st, work, a poor memory and no organisation skills its taken me until now to wite a letter to contest the fine or have it reduced to a warning.

I was done by a car on the side of the road. Recorded speed was 58 and alledged was brought down to 55.

It's my first fine since getting my P's 2 years ago (Admittedly not a great deal of time) but a few mates said that since it was a first offence and under 10km's over, I should be able to get off. But having not written a letter themselves or simply forgetting what they wrote, they werent much help in telling me what to write.

Anyone had any experience in the same situation? Any suggestions on what I should be writing?

Worst part is that it's a couple of streets from my house, I always see the car/camera there and I'm usually making a concious effort to drive 5 km under the limit past it.

Edit: Fine was $159 dollars and 1 point

Edited by bob182

I might just pay up now. I'm working full time and I can't see myself getting into any real trouble with demerit points in the next few years of P-Plates.

As a side note. I am all for speed cameras, but since I was caught on a staight, empty road at mid day in good weather conditions, maybe police need to start thinking about putting them in areas where speeding is actually dangerous. But I cant complain. Done worse withut being picked up in the earlier days of P-Plate driving. probably why my corolla over-heated

I might just pay up now. I'm working full time and I can't see myself getting into any real trouble with demerit points in the next few years of P-Plates.

As a side note. I am all for speed cameras, but since I was caught on a staight, empty road at mid day in good weather conditions, maybe police need to start thinking about putting them in areas where speeding is actually dangerous. But I cant complain. Done worse withut being picked up in the earlier days of P-Plate driving. probably why my corolla over-heated

Don't worry bout it mate you will NEVER get out of a SPEEDING fine unless (and I'm not reccommending this in the slightest) you have someone take the points/fine for you.

As for all other demerit offences (not hooning stuff) you can opt for a summons as opposed to an on the spot fine/demerits. That's always good if you need to delay things a bit :happy:

lol...i did...saved me the cash but that as only because i was able to prove wrong speed signs...some place in the country side....cant remember where but was a while ago....

but in general you made a mistake...n got caught...so learn ur lesson and pay for it...

Off your high horse everyone!

Read this Bob... http://www.police.vic.gov.au/content.asp?document_id=10369

Sounds like those criteria accord with your circumstances, so you should be able to get out of it. Writing the letter should be reasonably straightforward, so long as you are reasonably coherent.

Good luck, and stop speeding :domokun:

  • Like 2

I wrote a letter and I had my fine reduced to a warning (no points deducted either). See the web page as linked above. You need to admit your fault, and refer to the fact that you have not had a fine or pardon within the last 3 years.

When I was let off the 5kph fine I had not had a fine previously for over 5 years. The previous one was for 24kph over, and the one about a year before that was 11kph over.

Getting out of a fine is not hard. Being on P's didnt used to do you any favours (and infact they used to honor the fine and points) but times might have changed. As much as it frustrates me to plead guilty and ask for forgiveness in the 4kph over on a highway bracket, the issuing officer has always written back a warning and removed the 1 point and fine.

If you write a carefully written letter and you have an excellent driving record. You have a chance of getting out of it.

I know two people that have got out of their first fines :)

If its your first offence under 10km over you will get out of it just as other said admit you made mistake say was split second of carelessness and you have learnt from it blah blah and if you could please have a warning. I did it on my first offense on my Ps got off.

Thanks for responses guys. I may as well take 10 minutes to write a letter. I cant have any complaints if it doesnt work.

Seems worth a shot.

I'll post back in a few days or whenever I get a response

MATE!! all these people on here are all wankers.. majority of them are gunna tell you.. pay the fine learn ur lesson.. but you know what cause they dont have any balls to stand up and cheat the law like 95% of people do f**k them.. do it for yourself what havet you got to loose nothing... you loose the contest you pay the fine. you win you dont pay ... trial n error dont worry bout these tools who have no idea how t5o get out of one... go to a mechanic and heyll help u out..

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • After 23 years of owning a Skyline, finally had the latch go.  Followed this guide,  works like a dream again. Great Guide 👍
    • Hi all,   I’ve got the biggest lot of problems with my R33 GTS-T   It was a freshly rebuilt 25th anniversary RB25DET (plastic cas, neo cams) probably 6 years ago now   The engine was running so well but I fkd up badly and trusted someone I’d known for 10 years that was well known around Plazmaman for his welding and fab work. I added a lovely photo of some of his previous work. Not sure why my car was worked on by whoever did this shit     I’m normally someone who would never open myself up to something like this, I still can’t believe I did it. Trusting him literally fkd it all up for me. Everything has been a struggle, like it’s almost been 6 years that’s how much I’ve just on and off been trying to work it all out.    All I wanted was a car that danced down low, like full boost from around 3~3500rpm to redline, don’t really care what power it puts down (if it ever does) but I just wanted it to be quick to get on it.    He recommended the turbo to get, I picked Hypergear but he told me to get the front 4” with a T4 and 0.68 rear housing.    I was expecting all these beautiful welds, tidy fab work and paid for it to be ready to go to a tuner when I got it back.    I got a car back that was an absolute mess, I actually couldn’t believe it was my car anymore. I don’t think you could even call what he did welds, they’re disgusting.    So I stripped everything he touched off it and with every bolt I loosened it just got worse and worse.    I covered it and literally built and finished another car in the meantime but now it’s getting to the point where I really want my Skyline back.   Its a struggle because I paid him to do all this shit because I didn’t know how to and now I’ve had to try and figure it all out omg    Please excuse the bird shit horrible welds, I’ve got my show pony car and am so beyond dealing with this car I don’t even really care at this point.    If someone told me about what he did to my car I wouldn’t have believed them but it happened to me. It was unbelievable. He went missing, my car went missing, it came back missing parts, the straight af chassis rails bore the scars of being dragged up a trailer backwards, even the sandwich plate was bent. Everything was leaking and open to whatever fell into it, rounded off/ missing bolts, power steering oil and coolant everywhere, no gaskets, parts stolen off it, even managed to damage the sump pan.   Promised me he’d finish the car, knew what it meant to me, I paid him thousands and thousands just for him to trash it. He told me he was fully licensed and insured, come to find out he’d cancelled his ABN, so obviously no insurance. I had laid up insurance on the car and would’ve been covered but I was scared they would’ve written it off or because the business was no longer trading I’d still be liable.    He was supposed to:  New fully custom mild steam pipe exhaust manifold with turbo location moved from factory position to high forward mount. (I don’t know if it is a mild steam pipe, I’ve got a funny feeling the waste gate isn’t in a very good position and I don’t think the outlets off each cylinder are equal) 4” custom stainless steel dump with external gate (he re-plumbed it) Cut and shut OEM intake manifold with throttle reposition (I ended up doing the throttle reposition) Box in pod filter (left out) New 100cel catalytic converter (pretty sure it’s there but unsure if it’s 100cel) Front mount intercooler piping fabricated to suit (all smashed up and rusty holes where he was supposed to make it look standard where fmic piping passes through. I don’t even think my front bar is going to fit 🙄) Custom 5” intake pipe from pod to turbo (didn’t come with it so had to do something to make it work with the Z32 afm)   Engine: Full cylinder head service & machining  Brand new valves Precision upgraded spring kit Engine block honed New bearings  New piston rings  New ARP conrod bolt kit New ARP head studs Cometic head gasket VRS kit   ATR43SS2 ball bearing turbo 0.68 rear housing  Turbosmart 45mm external wastegate (got delivered to the fab bloke, I’ve got no idea what spring is in it, I’m assuming the one that came pre installed) Walbro 260 fuel pump  Nismo 740cc injectors (tested to 880) Spitfire coil packs GCG FMIC RB25DET manual 5 speed 4:11 rear diff   I’ve got an Apexi Power FC in it atm, I was hoping to just get it to operating temp to make sure everything was okay before towing to a tuner but it’s over-fuelling too much. I don’t think that’s going to happen so i think I’m going to get either a Link G4 or Haltech for it. What do you guys recommend? I can’t work out the power FC so just gonna give up on that one     It’s got an exhaust leak coming from somewhere I can’t see 🙄    The fuel pressure was steady but now it like drops from 40 to 20psi randomly (noticed this yesterday)    I’ll attach pics of the shit he put on my car and the engine bay now as it sits    I really just need some help, I need a tuner in Sydney I can trust, I’d like to be with the car while it’s being tuned if possible, I know it looks terrible but unfortunately I’ve just got to put up with it for now and fix the cosmetic stuff later   Do you guys think the manifolds are going to be okay? Or do I throw the exhaust manifold and try again?   I don’t even think these combinations are going to work tbh   I know everything I fitted was rated to be able to take at least 400kW but most rated higher    If you’ve gotten this far I really really appreciate it 🙏 I don’t mind if you trash me or the car, I made a rookie error and f**k I’ve paid for it. As you’ll see 🙄  
    • From everything I’ve heard you’ll be waiting a long time for  the parts to arrive 
    • Have you looked at the workshop manual?
    • Hmm. I've gotten pretty good outcomes from talking to them about things that I've had go wrong or ideas for improvement. Have had a lot to say about the R32 FUCAs, and they have sent out some replacement parts for those, gratis, on a couple of occasions. Mind you, I have bought a couple hundreds of $ of replacement rod ends for them too!
×
×
  • Create New...