Jump to content
SAU Community

New To Skylines


ls128
 Share

Recommended Posts

The majority of N/As that I've seen have been autos. In fact I can't even remember having seen one that wasn't (not that I'm saying there aren't any out there).

I know it's not what you want to do, but I think you'd be better waiting and you'll probably end up with a better car in the long run when you're ready and able to drive the turbo.

Link to comment
Share on other sites

If I found a nice 33 for the right price then i'd get it no hesitation....my kinda goal is to get something fun now - to last me a year or so, so I can save up & buy something way better part way through next year.

Link to comment
Share on other sites

I completely agree with you Tony, however that one I linked is a 32 with a rb25, just comes with the rb20 motor as a spare..Perfect for when I get onto my blacks.

Link to comment
Share on other sites

If I found a nice 33 for the right price then i'd get it no hesitation....my kinda goal is to get something fun now - to last me a year or so, so I can save up & buy something way better part way through next year.

Take advice from somone who wated there money on a NA DONT do it.. TRUST me you'll regret it so much later that extra money you spent on a NA skyline that barely moved could have gone towards more mods on your new r33 ... Just take my advice trust me your going to hate yourself later :)

Sid

Link to comment
Share on other sites

Tony - I don't think so, would have to check with the buyer...Speedwhore, The guy isn't asking a huge amount of money for it - and it comes with the original motor!

Link to comment
Share on other sites

Yeah - Don't start me on the MR2. Toyota has admitted to importing a X19, stripping it and basing the original MR2 on it!! Kinda wanting to not have a two seater, as i'm usually designated driver! I raced against one at Wakefield Jan this year, though it was turbo. Didn't seem to bad - that being said, he had more spins then I did...

Link to comment
Share on other sites

The MR2s are little less forgiving on the limit, a lot better after 92 but the brakes arent great in stock trim.

Shame about the 2 seats though.

You might have rego dramas w/o engineers report onthe 32 though.

328i? 2j Supra N/A? Maybe too $$

Edited by Tony Brown
Link to comment
Share on other sites

Not sure what year it was - def one of the older ones though. Yeah I know that it may have dramas with rego without a engineers report - but it has rego till jan 2012, by then i'll have my blacks and hopefully the turbo motor back in & engineered for that (if it even needs it?)

As for a 328i - i've looked at BMW's and Alfa's - Eurpoean. I've learnt my lesson with European cars & Parts. Costs a sh1tload. Even at mates rates! Never really liked the look of Supras, but would be open.

Link to comment
Share on other sites

I guess that doesn't leave you too many options, RWD N/A 4 seats, japanese and fun to drive......just about explored all options here and since we are on a Skyline forum, then it could be an RB25 powered 32 since its potentially the best "bang for your buck" car in N/A for your circumstances.(only if you can beat the price down a fair bit, a non-engineered conversion is not worth that kind of money IMO)

Hell I just sold a R34 GT-T auto sedan for $8500 http://www.skylinesaustralia.com/forums/topic/352396-r34-gt-t-auto-sedan-in-canberra-8500/page__st__20__p__5664504__fromsearch__1#entry5664504 thats only $1600 more than the car you are looking at, and while I understand that it would not have suited your needs, just comparing value for money makes the 32 look more like $3500 than $6900

I am all out of suggestions.

Good Luck, Tony

Edited by Tony Brown
Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share




  • Similar Content

  • Latest Posts

    • Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
    • They should do. I have S14 (or something S chassis, anyway) driveshafts in my R32 (because my diff flanges have 3x2). They're the right length. When you go looking for R32/3/4 driveshafts (for turbos), they're all the same thing, so are the same length. So there really shouldn't be any reason why those cheapies from JJ won't also fit an R34. R32/3 NA should also be the same thing. The (3x the price) D-Max ones are uni-fit. They have 5x1 and 3x2 bolt holes and say they cover all the cars. So that would also suggest that they are all the same except for the flanges. And in that case, the flange goes both ways. I'd be buying the D-Max ones if I ever have to replace a shaft. Because that will open up diff options without needing to juggle shafts also. Juggling shafts is gay.
    • Yeah with the adaptors they do look like the photo above - just the fitment within the plenum itself and then further with the rail to the intake is questionable - we shall see tomorrow hopefully once I get some replies from Aeroflow, maybe those bosses are the missing piece....
    • Should be fine, if you have it sitting too far in, you end up just spraying the walls and have shit idle. You "can" run them like that, however I don't think it's a great idea (also depends on your plenum, might be good to just get the injector bosses first, mock it up and see if you need to get the bottom extension) Ideally your injectors, with the extension should look like this  (Not my photos, just Google)
    • Thanks for the replies guys, it's really appreciated.  It seems the kit was supposed to come with those injector bosses but hasn't. Unsure if they'll help as even with the adaptors to make them a 3/4 height injector they still sit too far out so mount the fuel rail?
×
×
  • Create New...