Jump to content
SAU Community

Recommended Posts

Hi all I am selling my 1993 180sx; bit of a blurb: owned it for ~2 years, When i purchased this one, my goal was an immaculate streeter with low kms that i could build up to drive daily as required

as well as to and from the track. I literally looked at 15-20 before this one and bought it from a member on here who was up there with the most pedantic nissan owner on here. I myself have done changed oil and filter after every track day and there have been four or five in this car in total (2 or 3 peanut skid pans, a marulen and a wakefield day). This car has travelled ~4000km since i owned it.

Anyway it's a:

1993 Nissan 180sx

its nissan pearl white

5 speed manual sr20det

112 3xx kms

Rhino alarm system

Rego included till july 2011

Exterior:

Can come with either a full vertex kit, or

CA front bar, genuine nissan aero skirts and vertex rear (CA bar and skirts are a shade different colour)

White bonnet or carbon

Wangan ducktail boot spoiler,

D-max rear window spoiler

Raybrig Headlights with 6000k HID kit

clear indicator/Parker lights

Type X rear lights with clear centre lights as imported from japan

Clean paint in awsome condition for age (always garaged)

Boot spoiler holes welded and bogged

Front and rear guards rolled to suit wheels

Interior:

Mint interior aside from dash having one crack, but above cluster, so not as noticeable

Mint S14 front seats, with bride pillows

Nardi wheel (with HKB boss kit and working horn)

HKS turbo timer

Apexi el gauge 60mm boost gauge

Midnight mods short shifter

New black gear boot

Momo gear knob

Digital climate control with air con that was working until vent got stuck (there is article on here how to fix, just havnt got around to it)

Genuine 180sx floor mats

Stereo:

am not a big stereo man, but sounds clear and quality

pioneer double din

some good front speakers

6x9's in rear

Engine:

T28bb turbo, running 12 psi

3inch split xforce dump pipe, xforce 'flex' front pipe to x-force extremely high flow cat (hollow)

3inch cat back exhaust which i just spent another $350 to get it raised up as high as possible (not too loud)

Hybrid limited edition FMIC and piping and Bov

Exedy heavy duty clutch

ACL bottom end race bearings throughout bottom end, recently installed by a well respected engine builder.

Gk-tech new radiator overflow bottle

Custom 3inch stainless intake pipe with HKS mushroom filter with new genuine element, hidden in standard air box

Shoes and suspension:

full set of 16 x 8, zero offset xxr's with 205/50's

Moonface coilovers,8/6 spring rates (jap brand and the best i've owned, cost the previous owner $2500 new)

New Ikeya formula tie rods

Primal Garage knuckles (hands down the best mod i've done, so much lock and zero bind)

mismatched castor rods (JIC and Tein.. had JIC and they pulled me up on one rose joint when getting regoed so put in a spare Tein one)

D-project toe rods

D-project rear camber arms

D-project traction rods

Whiteline front strut braces

Whiteline rear strut brace

Vented and slotted rotors front and rear

EBC greenstuff pads

4.11 locked diff or 4.11 viscous lsd

my18oforsalepic.jpg

my180sxpic.jpg

MY180sx.jpg

wakefielddrift.jpg

my180forsalepic3.jpg

my180forsalepic2.jpg

MY2carsingarage.jpg

IMG_9930copy.jpg

post-20970-12969784871109_thumb.jpg

post-20970-12969786442412_thumb.jpg

i've never been hassled, defected or sent to emissions in this, though it is definitely not legal height.

Just been serviced with new oil, coolant, oil filter, gearbox oil, etc

Small crack in bottom of front windscreen, but never noticed when rego inspections were done so never needed to change (this is considered in price).

I've taken good care of this car and its a pleasure to drive, slides amazing, buyer will not be dissapointed! come and have a look.

No joy riders please.

PRICE: 10k (can do a lot cheaper without parts, ie stock tailights, no rims,ect, ect)

Located in Wollongong, about 1 hour south of Sydney

NO SWAPS SORRY.

Happy to help send interstate if need be.

ALSO I WILL NOT STRIP THE CAR UNLESS THE BUYER DOESN'T WANT A PARTICULAR ITEM

Contact: Tye 0421907656

This is the new thread, as I couldn't work out how to edit my old one?

*does not come with rear traction or toe rods, nardi will be another aftermarket steerer

Edited by AE71GZE

Can you please PM me how much you could discount if I dont take...

- Wheels

-Rear window spoiler

-wangan spoiler

-carbon fibre bonnet

-type-x taillights

- no vertex kit,

Just the aero sideskirt, no CA front bar or rear bar if you dont have stock rear bar...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Back in January, I noticed my car felt noticeably weak. I had the injectors cleaned, which seemed to solve the problem -- until now. Recently, the car suddenly lost power again while driving. Suspecting the injectors, I brought it to the mechanic. He recommended replacing them entirely, saying the current ones were getting unreliable and fiddly to work with. I could not find a direct replacement for my current injectors. The closest match I found were 440cc injectors. This led me to look into the possibility of upgrading -- and of course, that would mean remapping the ECU. From my research I found: The OEM Part numbers are 16600-72L20 and 16600-72L21 Both the RB20DE and RB20DET use the same 270cc injectors. There are much better options out there over the old OEM injectors. Nistune could be a viable tuning option. While the RB20DE isn’t explicitly listed on their site, the ECU is essentially the same as the GTS-T version - just with a different map. The ECU code on mine is listed as supported. One concern is finding a tuner who works with Nistune. Aftermarket ECU like Haltech and Link, but this would be the most expensive choice (and possibly overkill for a mostly stock RB20DE) I admit that I am very new to the tuning scene and would appreciate any insight or recommendations regarding this.   These are some SAU links where I got some of my information from for reference: https://www.sau.com.au/forums/topic/380324-rb20de-injectors/ https://www.sau.com.au/forums/topic/477396-factory-270cc-injectors/  
    • The inspectors are not forensic by any means but if you forge your documents and/or badgings on vehicle parts and are found out, the consequences are just far bigger than if you just run illegal parts. And their job quite literally is to cross reference what parts you got installed and what your papers say you got. Something as silly as your suspension being 1mm too low will fail you. Nonetheless I asked if someone knew the damn pipe and I certainly did not ask for smartassery or underhanded comments, no idea why you need to be told this. Great way to waste both our time.
    • As useful as you explaining what forgery is... But then again, I wasn't aware your inspectors were also forensic experts and inspect nameplates on each component to confirm everything is original. They must inspect roughly 3 cars a year at that rate. You're right though, my comment doesn't help you in anyway, so I'll go talk to my wall now. Cheers. 
    • Say that to the guy that is going to fail your inspection or tow your car for illegal exhaust modifications. If you have anything else useful to say, please go tell your wall.
    • You must be fun at parties. 
×
×
  • Create New...