Jump to content
SAU Community

Team Raceworx Race Debut: State Champs Wakefield Park 13-14 March


Recommended Posts

we took pete's silvia on a trailer down to calder on the weekend for the drift nats.

pete had a pretty good run. linked it up all doing well. then onto the straight. bout 140kph lost it. then smash, into the concrete wall. front of silvia is damaged. pics up by tonight. pete's A-OK. all is well.

cheers, MARK

I'll be at EC on 1-2may, will come by and have a geezer at the car, looked good the other weekend, didn't think it was you guys though! Im helping out with a formula ford this year so i gues i'll be seeing you guys race a bit this year! good luck with it Duncan!

Yeah, there were 2 GTRs there, the other is an improved production car. For the May round, I'm hoping to have my car ready, but Mark will be doing Targa Tas that weekend so the other car won't be there. Looks like Pete's car won't be there now either.

*Fingers crossed*



  • Similar Content

  • Latest Posts

    • Yeah i have R34 with factory small box and now RB25DET NEO swapoed and iam planning to upgrade to big box.  So i would be good as long as i do not change diff? 
    • Based off what you’ve said here, I think I’ve figured out a good bit of what I’ve done wrong -  So on the line going from the PCV valve to carbon canister, there’s a T joint that is pretty much right next to that lower port - I hadn’t noticed that the hose in the diagram was curved to attach onto the carb, so I was putting that line for the lower port onto the PCV line / carbon canister line instead. I’m going to have a flick through the manual again tomorrow and should hopefully find a diagram that’ll show me where that T joint should be connected to. Timing also 100% needs to be sorted out as well, should be able to tackle that tomorrow as well. Definitely feel like I should be on the right track now though. 
    • The screw is for idle (pilot circuit) mixture adjustment. Else, I'm confused ~ the diagram shows 2 carby ports, and the intake manifold port, but you're suggesting the "2nd port on the back of the carb that isn’t mentioned in the diagrams" ...yet, both carby ports are shown...que?... ...in any event, that port should be connected, but if not (like it is now), it's unlikely to cause a backfire out the carby (it would introduce false air and give you a fast/lean idle) ...sounds more like timing issues/spark plug wire routing responsible for the backfiring.    
    • That's fair, I can see both points. I get enthusiastic when I see the FS section has a new post and want to see what interesting thing someone is selling. Then I get deflated it's a bump of a 10 year old post. Ha ha
×
×
  • Create New...