Jump to content
SAU Community

Recommended Posts

Hey guys.

Its an R33 S1 rb25det. Stock ecu, with Unichip piggyback that was on the car when i bought it several years ago. I had it tuned for exhaust/fmic/13psi a couple of years ago.

Stock injectors, stock turbo.

Car stalls on me whilst driving sedately. I pull over and try to start it. Cranks, but wont start.

I can hear my injectors were ticking like crazy with ignition 'reds' on. This isnt right!

I unplugged the CAS. Switch ignition on. Injectors still ticking. Try a few other things. Still the same.

Eventually I pull the harness from the piggyback. Switch ignition on, injectors not ticking. I crank it, doesnt start. But that's expected.

I plug the piggyback in again. Ignition on, injectors not ticking, and car starts and runs fine.

So...

Is there a relay somewhere along the injector wiring that could be getting stuck open/closed, and by unplugging the piggyback, it allowed it to reset?

Could this happen if there's a bad earth somewhere in the wiring. Either ecu or injector loom?

Is it more likely that the piggyback is at fault, and i need to tear it out and look at a new ecu setup?

Could it be the stock ecu at fault in this case, and worth replacing instead?

Hopefully someone has had some experience with this problem before, and can point me in the right direction.

Thanks :)

Edited by Munkyb0y
Link to comment
https://www.sau.com.au/forums/topic/353761-injectors-ticking-with-reds-on/
Share on other sites

anyone?

instal a relay to control the injector power feed triggered from the ECCS relay feed.

very common problem when running aftermarket injector control if not set-up correctly.

Edited by Supa Steve

thanks steve, but i understood very little of what you just said :)

keep in mind, this is only the 2nd time it has happened (twice in 7 days), in the many years ive been using this same setup.

and its been running fine since i made this thread *knock on wood*

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I havent bought a manual cover for the dash yet and no cluster change, won't bother me too much, I just need to get that auto box gone, manual in! I miss my manual. 🤪. We started last weekend and managed to get the box out. Planning to start putting it in this weekend and then order a single piece tail. We were super careful to take time and not damage anything. It's my first time working under the car.  With my S15 mainly worked in the bay. This time, it was a headache because of three or four bolts only. They simply didnt want to leave thei homr and the one securing the tailshaft, another above the GB, and the one securing the lipstick was a shit. Mates mate, Davo caught fire 🤣, nearly opened his chest up with a grinder 🤦🏽‍♂️ and both mates nearly had a plate from the box land and slit their head open. Fun times. We all survived. Not the easiest working with limited access on jackstands. As I'm sure we can agree these are the memories which make us love our car. For all three of us, was an awesome weekend and Sunday 3.30am before tools down was a fantastic effort. I need to upload pics, but looks like it needs to be via Url now. We used to be able to just upload pics back in the day. It's been that long! 🤪 Im currently spraying rustoleum under body, not because it's rusted. It's super clean, but just so it's protected for the next 10 years. There was a few surface rust spots. Which pretty much wiped off with a 3M scourer.  Really impressed with how well the previous owner maintained it. Bank account went down so quick! Service, then GB - managed to get a spanking new 34 genuine box from Nissan. All the rest of the conversion parts from Kudos.  Went with a Nismo short shifter. New pedals and Exedy Clutch and FW. Ordered the Prp Rear Main Retainer kit which should arrive Friday and my first engine mod part just like I did with my S15 will be the Tomei Expreme Turbo Outlet. Already on order. It'll likely sleep next to me on a pillow during the coming months. 🥰 Last build was on my JET200GT profile and on SAU and Hardtuned I had documented the build. Planning to try to do that again. Brands feel scarce now. Wish we still had ARC and Apexi parts readily available. Exhaust - need some advice on this. I had an Apexi exhaust on the S15 and loved the tone. My mate had a HKS HP Silent on his 33 and suggested I go with that to avoid drone. I can't remember hearing an RB25DET running that so will likely need to wait for a meet or something to hear it.  Not after big power, just enjoy building it, and drivability with minimal negative attention.
    • Have a chat with Ben at Moore Performance or Jesse at JS Performance.
    • Thanks both. All good advice. Reminds me of drilling through stone wall for drainage pipe 😬 I'll let you know how I get on if I still have use of my hands afterwards 😅
    • Finally got shipping number for the intake and throttle body, shipped by UPS, so "should" be in my hands sometime next week, fingers fracking crossed
    • I'm so far behind in the jobs I have to do at both work and home (including car) that I have become immortal. There's simply no way that I can die now.
×
×
  • Create New...