Jump to content
SAU Community

Recommended Posts

OK, a quick question.

I've currently got 225/50/16's on my stock 6.5 inch wide rim and they fit very nice.

I'm going up to 17 inch rims that are 7.5 inches wide.

Can I go 245/40/17's on the 7.5 inch wide rim? Or should I stick to 235/45/17's ??

I was thinking that from 6.5 to 7.5 is a 25.4mm wider rim, and from 225 to 245 is only 20mm wider..

Is that right?

J

Link to comment
https://www.sau.com.au/forums/topic/35377-tyre-size-for-7-12-inch-rim/
Share on other sites

I'm running 235/45ZR17 on 17x7.5s, and they look just right.

If you check the tyre specs, you should find that a 7.5" rim is the minimum width rim that a 235/45 x 17 tyre should be fitted to. (A 235/40x18 has a minimum rim width recommendation of 8" (9.5 max)).

I've just been on the phone getting prices on 235/45/17's

They range from $190 a tyre for the Hankooks to $336 for the Michelins Preceda's !!

BIG difference.. But everyone I rang seem to think the Hankook was as good as the Preceda's....

OH, and the price jump from 235/45/17 to 345/40/17 was about an extra 40% !! Not worth the extra 10mm...

J

jay dont u mean 245 hehe.

Guys im in the same postions as everyone else. I need new tyres, and now since im makin good power i need somethin sticky.

Now if i get a good quality tyre such as faulkken azenias or whatever they are called, how much benefit is there in running 255s over 235s?? does the benefits out weigh the extra costs?

Do'h - yep, 245 :)

It's a hard call... Go for the more expensive tyre that won't last as long but will stick like $hit to a blanket, or go the cheaper option and not be able to get 100% of your power down but they will last longer... That's where I'm stuck..

It looks like I'll end up going with the Hankook's, I've heard good things about them, and they are within my price range.

On your question about 235 v 255. You'd have to look at how much of a difference in price they are. Although 255 would look FAT :)

J

well i was tight last time i went for tyres and reluctantly chose cheapo bridgestone b530s.

Basically they arent good and they piss me off everytime i cant get decent power to the ground.

another time i got simex tyres and they stuck pretty well, and wer cheap at 160 each for 235/45/17.

ultimately, im a uni student and cant afford to spend heaps in tyres, and especially cos they end up being bald in 6 months.

is this abnormally short tyre life

Hehehe, depends on how you drive :)

The 901's I've got at the moment will probably due to ditch when they are around 18 months old. But 95% of the time I drive like a granny.....

If you give them a hard time, then 6 months would be about right.

J

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I agree on doing some better than factory pistons, rods, and oil pump. For anyone using the vehicle on the road, I don't get why everyone wants big cams. The stock cam profile, with some more lift would be mint for road usage. Everyone going big cams and then wondering why it isn't as responsive in traffic, when they've shifted the torque curve upwards an additional 1000RPM. Make torque, at lower RPM. Sure it's not as cool as claiming "500KW" and revving it to 8,0000RPM, but that same torque 2,000RPM earlier... Then you don't need the extremely high end pistons and rods, and blah blah blah.
    • Personal experience. Those f**kers burn. And are actually a PITA to put out. Next time I walk down the back, I'll snap a photo of what the inside of the bonnet looks like when that thing ignites. PS, powder fire extinguishers are useless on that stuff too as it's fibrous and when it ignites, it starts to pull apart. And you end up just blowing powder through a sieve effectively.   Like the big thing is, if it's fire resistant, it's job is to stop what burning? The METAL above it? It's just to try keep heat off the bonnet paint work.
    • Oh man, sorry, $60.00000000... 😛
    • That's more or less what he meant. What it really means is that you do not have to go full crazy on the build. Don't need the best oil pump, expensive rods & pistons, big cams, etc. You can upgrade whatever you want instead of using stock level items, but you don't have to. Having said that - any time an RB is opened up, if anything is getting replaced, I think the opportunity should be taken to do all the sensible upgrades. Pistons, rods, pump, etc.
    • February update 🙂 We managed to get the very last 1/18th "Extra Scale" cars stock available from bookstores in Kyoto. These are actually the last ones and will not be restocked again! Hachette Collections Japan have not decided on a release date for these or other models in the series, so for the time being these are all there are available new.  These are showing up on Yahoo auctions at inflated prices already (especially the Celica and NSX) so get yours now at a very reasonable price before they disappear! Stock quantities: NA1 Honda NSX - 1 left: https://www.oemsoko.co.jp/products/1-18-extra-scale-1990-na1-honda-nsx 1973 Toyota Celica LB 2000GT - 2 left: https://www.oemsoko.co.jp/products/1-18-extra-scale-1973-toyota-celica-lb-2000gt 1968 Mazda Cosmo Sport - 2 left: https://www.oemsoko.co.jp/products/1-18-extra-scale-1968-mazda-cosmo-sport 1970 KPGC10 Nissan Skyline 2000GT-R - 2 left: https://www.oemsoko.co.jp/products/1-18-extra-scale-1970-kpgc10-nissan-skyline-2000gt-r
×
×
  • Create New...