Various Parts For Sale, Most To Suit S13/180Sx

[AnDyStYLe]

Hi All,

I have now decided that I need to let this go... Everything is BRAND NEW except for the Z32 AFM (including plug), although as you will find it is in immac condition. I have had this whole package sitting around for some time now (have been extremely lazy to do the work and fit it up). Now I need the funds to move onto others things and priorities, thus I need to let it go.

I would prefer to sell EVERYTHING as a whole entire package, as the whole shabang is everything you will need to get the turbo into your s13/180sx... And I mean EVERYTHING.

Please refer to the first picture which gives you an idea of what's included and approx prices if I were to part. You can see that it adds up very quick and over what I'm asking for the package deal. I'm losing out bad on this I can list everything out if need be, but I think that picture says it all. I still have receipts for the genuine potential buyer if you like them.

Just to note, people that know me knows that I don't half ass shit for my ride, so all is the best parts you can buy (I'm sure you have realised from the pictures). E.g. the HPC on the turbine housing is from the one and only HPC - High Performance Coatings which everyone knows they are the real deal.

Anyway, it is a very regretful sale Low ballers will be told where to go. I am extremely firm on the price. Again, I would prefer the whole thing to go in one entire lot and one person so it makes the upgrade striaght forward. Basically the funds will be very helpful to put forward onto priorities, but since it's been sitting around for this long now, if I don't get what I'm after I'll keep it.

I'm after $3k for the lot picked up from Burwood East VIC (postage additional for interstate buyers). Anyone that knows their shit will know that this is VERY WELL priced!

For genuine interest, please pm me ^_^

Cheers,

Andy

Edit: Below I have other shit for sale too...

============================================================================================

Topic Title: Bride NO50RX passenger rails S13/14/15

Topic Category: Australia - VIC

Topic Description: Plus a couple of other random shit

Hi All,

Need to rid the following...

Bride NO50RX passenger rails S13/14/15 - $200 FIRM

Condition as shown in pictures. Close to brand spankin. Includes EVERYTHING that you would buy brand new (as seen in pics), although a fraction of the cost (rrp $330+). Also comes with the proper seat belt bolts that you usually wouldn't get with second hand sales.

Federal 595SS 235/45R17 x2 - $150 pair

Approx 90% tread and even throughout. These have been stored in the garage away from the sun and rain etc.

Better/clearer pictures to follow*

S13/180SX castor rod brackets - $20

Stupid Melbourne roads = Slight bend on a section as shown in picture, although easy enough to pull back out if you're fussy. Does NOT effect fitment of castor rods and imperfection is only superficial. Good for strengthening and creating your own Nismo Power Brace (rrp $300+) at a fraction of the cost if you're handy with a welder!

Rays air valve stems x5 - $20

Second hand as you can see, although are great quality. To fit TE37 and SE37K rims (came off these), and many other Rays Volk Racing rims.

Bride rail I'll send anywhere in Aust via smartsend.com.au or similar at your expense. From previous experience with sending a drivers side rail to NSW, it was about $30 to do so.

Federal rubber I'ld prefer pick up only.

The random shit I'm happy to send via Express Post at no additional cost

Location is Burwood East VIC for pick up.

Cheers,

Andy

============================================================================================

Topic Title: Projector Lenses for 180sx

Topic Category: Australia - VIC

Topic Description: Lengthy read!!!

Hi All,

Ok now here's one for the boys and girls with creative minds and enjoys acheiving the completion of modifying shit for their pride and joy...

This has been sitting around forever tucked around in the spare room... I only come across this after doing a clean up. All the shit it's caused me I was going to throw it away, but thought it may go to better use. Also didn't want to throw away all the hard work and effort I previously put in!!!

So on with it, a quick background info...

I spent about 6 months trying to modify some projector lense headlights for my 180sx. This project has cost me a fkn heap and so much fkn around!!! If you have followed my previous threads/posts about HID's for 180sx's, you'll find that I've spent alot time, MONEY $$$, and effort trying to do HID's the correct way!

Unfortunately, after long anticipation but utter disappointment I failed to complete the project. This whole project backfired on me as I couldn't get it to fit up the type of HID's I run (Kaixen H4 hi/lo HID's which are too long) Having said that, you may possibly continue where I left off and make it suit if you have sorter type HID's!!!

So yeah, what I did was ended up buying two kits as I cracked the first headlight housing glass. The projector lense kits in question are PSI Parts H7 globe 7" x 5" Crystal Head Light Lamps with Angel Eyes UN50L17 (ref: http://www.psiparts.com.au/detail.htm?ProductID=UN50L17). Similar (if not same) as these Norcal MR2 ones (http://norcalmr2.com/pegasus/) although mine has the cut off for Australia roads.

I'm putting up for sale both kits, pretty much a double up of everything except the headlight housing and one of the glass (you'll see in the below pictures, except one of the spare glass is missing from the pictures - 3 glasses in total you'll get). One kit's been modified, and the other is standard as per sold by PSI Parts.

The current glass are masking taped up to the housing (as seen in the pictures) as I removed the silicon off cleanly. If you want to run the standard kit (saving yourself $100+ if bought new) you'll need to silicon them back up and away you go. Alternatively you can continue to keep going and finish off what I couldn't This gives you the opportunity to decide what you want to do with them!

Anyway, this is a bloody long for sale thread with all this dribbling :lol:

If you're genuinely interested, I'm more than happy to run through what I did to modify one of the kits...

I'm after $50 for the lot, everything in the pictures. If you're thinking about buying one of these kits off PSI Parts, I have one here already with additional parts to give you an option (saving $$$).

Shoot me a pm for any interest. Pick up is preferred (Burwood East), although I could post but any additional postage costs would be on you!

Thanks for reading!!!

Cheers,

Andy

============================================================================================

Topic Title: Genuine Origin Type II Carbon Fibre Bonnet

Topic Category: Australia - VIC

Topic Description: Suits 180sx Front

Ok Boys and Girls,

I'm looking at selling off my genuine Origin Lab carbon fibre Type II bonnet. Be different and rock one of a few kicking around in Australia. No need to wait the multiple months from Japan!!!

Condition of the thing is pretty much brand new. I have gone through the trouble to carefully fit AeroCatch latches which I'll include in the sale. Also note that you would typically use the nuts and bolts provided to fit the AeroCatch latches, although they were a bit dodgy for me with only small M4 bolts that could rip out during high speeds. Also using the stock nuts and bolts would require an ugly big hole at the bottom to be cut I ended up sourcing Password:JDM AeroCatch® Plus Flush Mounting Plates to use. I'm sure this shows you how anal I am when it comes to my car ^_^

Some pictures of the actual item...

This thing owes over $1.2k... I'm after $1k picked up. I can get it couriered at additional cost for interstate buyers.

Shoot me a pm for GENUINE interest.

Cheers,

Andy

Edit: Pre-AeroCatch latches fitted...

[AnDyStYLe]

Bride rail sold, payment pending