Jump to content
SAU Community

List Your Top 5 Mods

Adnan r33
 Share

Recommended Posts

Adnan r33 Enthusiast

Adnan r33

Posted
  • Author
Posted

wheres a good place to get a nistune? im surprised no one mentioned injectors..or is that pointless untill hunting done more power in the future?

sorry guys i only asked for a stupid number like 5 mods cause of budget limits :(

p.s if i were to set my boost at 10psi(stock turbo/r34 gtt smic) would a boost T do the job?

thanks for the feed back so far guys

RB25PWR Proficient

RB25PWR

Posted
Posted

wheres a good place to get a nistune? im surprised no one mentioned injectors..or is that pointless untill hunting done more power in the future?

p.s if i were to set my boost at 10psi(stock turbo/r34 gtt smic) would a boost T do the job?

thanks for the feed back so far guys

Injectors would be like number 6, along with fuel pump. The others mentioned are the mods to start with because without those injectors are pointless. Why would you need them without the extra power/need for fuel?Yes a Boost T would do fine.Just do some searching on this forum, you'll find endless threads about reputable workshops, what mods to do first, what gains to expect, info about ECU's etc.

The Bogan Grand Master

The Bogan

Posted
Posted

1. put a built RB30 bottom end on

2. build head/cams

3. put a correctly sized turbo on

4. injectors

5. OIL

Thats on the mota, then the ECU, then the fueling, then the tune, then the drivetrain, then the suspension, then the brakes, then the tyres, then the cooling (i/c oil cai)

And then, and then, and then

Welcome my friend.

Adnan r33 Enthusiast

Adnan r33

Posted
  • Author
Posted

iv come to realise that the mods never end do they haha

yeah i might leave the injectors later once im keen on more power but i might just boost to 10psi and get some new spark plugs

once iv boosted should i get a tune done or not really needed??

joeyjoejoejuniorshabadoo Grand Master

joeyjoejoejuniorshabadoo

Posted
Posted

ok, cheapest decent power available: :)

1: gcg highflowed turbo - 2nd hand - $1000

2: turbo back exhaust - jjr or similar - $1000

3: turbotech (not turbo smart) boost tee - $50

4: china spec fmic & piping kit - $300

5: nistune - $800

6: clutch - exedy single plate button $500

7: diff - welded - $100

ok, so for $3750 or thereabouts you can have ~ 230rwkw and a fun car to drive. add coilovers for around 5 grand that's pretty sweet.

injectors, z32 afm and fuel pump could be added to this later on for around $1500 and you will have ~260rwkw

  • Like 1
Mayuri Krab Grand Master

Mayuri Krab

Posted
Posted (edited)

For the fully sick individuals:

1) paint brake calipers red (+25rwkw)

2) flower stickers on rear window (+5rwkw per sticker)

3) fake turbo noise clip-on for exhaust (+50rwkw)

4) Neons (+35 rwkw per item)

5) 22" China spec chrome dinner plate rims (+90rwkw per wheel)

Or

Sell the car & buy a Hyundai Excel, do the above mods to it for the instant over 9000kw

For the normal people:

1) turbo back exhaust + high flow CAT

2) high flow panel filter + stock air box or POD with enclosure

3) Intercooler upgrade

4) Boost controller (manual or electronic)

5) Some sort of engine management + tune

Edited by Mayuri Krab
Adnan r33 Enthusiast

Adnan r33

Posted
  • Author
Posted

ok, cheapest decent power available: :)

1: gcg highflowed turbo - 2nd hand - $1000

2: turbo back exhaust - jjr or similar - $1000

3: turbotech (not turbo smart) boost tee - $50

4: china spec fmic & piping kit - $300

5: nistune - $800

6: clutch - exedy single plate button $500

7: diff - welded - $100

ok, so for $3750 or thereabouts you can have ~ 230rwkw and a fun car to drive. add coilovers for around 5 grand that's pretty sweet.

injectors, z32 afm and fuel pump could be added to this later on for around $1500 and you will have ~260rwkw

this sounds goood, since im on a cheapish budget...but i might get a jap intercooler since iv heard alot of people complain with the chinese ones.

quick question whats the pros and cons of getting my cat high flowed??

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      Speedo and odometer reading super slow r34gtt a/t

      By Kinkstaah · Posted

      Definitely didn't put a N/A cluster in instead? The speed sensor (location) is different in both cars.... I think. This will obviously stuff things up.
    • silviaz
      Fourth gear grind

      By silviaz · Posted

      Nah not the throwout bearing, it's something internal. I already replaced the throwout bearing. Mechanic misdiagnosed my car and thought it was a spigot bearing, went to another bloke who said it was an input shaft bearing. (I replaced everything when I pulled out the gearbox but didn't open up the gearbox.   In this video at timestamp 6:05 : Mine has the same sound  min
    • GTSBoy
      R32 GTR front coilover bottom mount - flared side in or out

      By GTSBoy · Posted

      It is definitely to space it out and away for clearance during compression, and possibly for spring clearance to upper arm. That latter would only be true for springs that are same-ish diameter to stockers, and so that probably doesn't apply to Teins or most other coilovers.
    • silviaz
      Fourth gear grind

      By silviaz · Posted

      Yeah, a mechanic who knows these cars told me even if I get a brand new gearbox the noise will return but will be less noticeable. I've heard someone also they this noise came back after 3,000km on a new or reconditioned gearbox. It is pretty f**king annoying though just hearing groaning most of the time lol. I wonder if an aftermarket input shaft bearing would fix the problem or how they are built.
    • GTSBoy
      Fourth gear grind

      By GTSBoy · Posted

      All RB gearbags, especially the big turbo box, have rollover noise. Mine certainly does. Always has. Sometimes is worse than others - no particular idea why, although it is probably temperature related. I have smurf jizz in mine and have had to have it in there from the first day the box went into teh car. It simply would not select gears with the engine on, on day one, with normal oil in there. And so, the blue stuff has probably ruined almost everything synchro related in the box. But it has taken 12 or 13 years to get to the point where I simply must replace the box. It has become increasingly baulky of late, which might be symptomatic of the way I've been driving it, as much as anything. I shall have to make some corrections when teh new box goes in. Input shaft bearing noise will decrease with clutch pedal pressed because the drive is removed. But yes, more often than not noises that work like that are associated with the throwout. It won't matter either way, new box will mean this one can be relegated to the parts pile.
×
×
  • Create New...