Jump to content
SAU Community

White 35 At The Island

White 35

By White 35,
in R35 GTR

 Share

Recommended Posts

White 35 Enthusiast

White 35

Posted
Posted

Ive been trying to get the GTR back to Phillip Island ever since we did the Nissan GTR drive day their with Mizuno & Toshio.

I managed to get a solid 3 days driving by combining Sat practice, Sunday Sprint and Monday track day with Drive Events.

I sent the car down with CEVA logistics in their race transporter which meant no issues like 09 GTR has with Toll last year. It cost $900 to be picked up from my office and dropped in Melb CBD.

From here i picked up the car and drove it to the Island.

Sat morning i ran my road tyres for 1 session just to get the feel for the track but it was clear after 5 laps that i was wasting my time on the Dunlops and lap times were about 1.47 to 1.48 straight up. After the 1st session i put a brand new set of 19 inch Michelin slicks on and WOW I knew that we were going to be flying by the end of the weekend.

So after a few more sessions on Sat I called it a day so i could leave the slicks in good condition for the Sunday Sprint.

Sunday morning 1st session sucked. They didnt let the cars out in order of speed and i got caught up with traffic and no matter what i did i couldnt get a clean lap... i would let everyone pass and then take off after them but it didnt matter cause i would catch them in half a lap... anyway i pulled in early on the 1st session a bit pissed cause i dusted up the slicks quite a bit trying to get a lap in.

Next session was better - they let me out first and i made sure that all 26 cars were on track behind me before i took off on my flying laps. I got 2 flying laps before catching up the back of the field and we were down into the 1.43's or so.

Third session much the same happened but i managed to get a 1.42.055 out of the car. This ended up being my fastest time and the fastest time for the weekend. The closest guys were about 3-5 secs slower.

So all up a great weekend and i know the car can go sub 1.40 with the right conditions of slicks, I also need to perfect my lines on the track remembering that id never driven here before this weekend.

We did the track day on monday as well but the car developed a big missfire due to some fueling issues and stuffed plugs - so called it a day and the car is now resting before getting another hammering on the 4th March at the island again.

This track is honestly next to Bathurst the best track ive ever driven. Its so fast and smooth. If you can somehow get your car down there its a must do...

Here are some recent pic's of the car. Next up is a rollcage cause its just too fast now... and i cant run Bathurst this year on slicks without a cage...

So ive got the fastest laps now at Bathurst and Phillip Island... Next up im off to Sandown to set the fastest GTR lap in Early April at the Sandown Sprint then back up to Eastern Creek to beat Dunc & Marek... watch out boys im coming for your lap times...

post-66586-0-18260700-1297829395_thumb.jpg

post-66586-0-42571600-1297829410_thumb.jpg

post-66586-0-35521000-1297829424_thumb.jpg

post-66586-0-04517300-1297829457_thumb.jpg

post-66586-0-62833000-1297829501_thumb.jpg

post-66586-0-55517000-1297829520_thumb.jpg

post-66586-0-51922700-1297829550_thumb.jpg

post-66586-0-41764600-1297829600_thumb.jpg

Link to comment
Share on other sites
White 35 Enthusiast

White 35

Posted
  • Author
Posted

thanks fellas.

Its not that hard to get your car there honestly, i can help you organise it anytime you want to go.

Just send it with CEVA to Melbourne. Fly down and drive it to the island. Easy!!!

The car doesnt have that many power mods really. Its got HKS Intercoolers, HKS Tranny cooler, HKS Boost controller, HKS Intercooler piping, Mines filters, COBB, full exhaust etc...

Its only putting out 385kw at the wheels on 98 fuel. Ive managed to lighten it though by about 100kg which makes a big difference...

Link to comment
Share on other sites
Tim GTR Proficient

Tim GTR

Posted
Posted

thanks fellas.

Its not that hard to get your car there honestly, i can help you organise it anytime you want to go.

Just send it with CEVA to Melbourne. Fly down and drive it to the island. Easy!!!

The car doesnt have that many power mods really. Its got HKS Intercoolers, HKS Tranny cooler, HKS Boost controller, HKS Intercooler piping, Mines filters, COBB, full exhaust etc...

Its only putting out 385kw at the wheels on 98 fuel. Ive managed to lighten it though by about 100kg which makes a big difference...

Congra,Miles,Seen your car flying at the Island. Great times at 1:42 first time at PI. It took Sam Markos a lot of time to sort out the GTR32 to get down to 1:39 with slicks,John Kennedy tried very hard going head to head with Stuart Ingwood to get the GTR33 down to 1:43.Robert Marshall drove John's purple GTR33 behind you doing 1:45. The R35 is no doubt a very desirable fast car. Suzuki san must be having a sunday drive laping PI at 1:46/47 at the Nissan drive day. Hope you will be able to better John's best time at 1:16 at Sandown Jeff Beable's red R35 laps Sandown at 1:20. look forward to see your white R35 at Sandown in the near future

cheers all

.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RB25inside
      Compatible rear drive shafts R34 N/A?

      By RB25inside · Posted

      Are these the Dmax ones you are in reference too? https://justjap.com/collections/driveshafts-bearings/products/d-max-reinforced-replacement-rear-driveshaft-set-fits-nissan-s13-s14-s15-r32-r33-r34-c35#description Not a bad idea to get the uni flange ones. I have sent just jap an email too. Will see what they say lmao. Only thing is the Dmax ones are on a big back order. Low key anything will be better then my OEM ones I got as they are sounding like popcorn when I go under load lmao 😂☠️🪦.
    • GTSBoy
      Compatible rear drive shafts R34 N/A?

      By GTSBoy · Posted

      They should do. I have S14 (or something S chassis, anyway) driveshafts in my R32 (because my diff flanges have 3x2). They're the right length. When you go looking for R32/3/4 driveshafts (for turbos), they're all the same thing, so are the same length. So there really shouldn't be any reason why those cheapies from JJ won't also fit an R34. R32/3 NA should also be the same thing. The (3x the price) D-Max ones are uni-fit. They have 5x1 and 3x2 bolt holes and say they cover all the cars. So that would also suggest that they are all the same except for the flanges. And in that case, the flange goes both ways. I'd be buying the D-Max ones if I ever have to replace a shaft. Because that will open up diff options without needing to juggle shafts also. Juggling shafts is gay.
    • ChoppedSpots
      GReddy Injector Help!

      By ChoppedSpots · Posted

      Yeah with the adaptors they do look like the photo above - just the fitment within the plenum itself and then further with the rail to the intake is questionable - we shall see tomorrow hopefully once I get some replies from Aeroflow, maybe those bosses are the missing piece....
    • Dose Pipe Sutututu
      GReddy Injector Help!

      By Dose Pipe Sutututu · Posted

      Should be fine, if you have it sitting too far in, you end up just spraying the walls and have shit idle. You "can" run them like that, however I don't think it's a great idea (also depends on your plenum, might be good to just get the injector bosses first, mock it up and see if you need to get the bottom extension) Ideally your injectors, with the extension should look like this  (Not my photos, just Google)
    • ChoppedSpots
      GReddy Injector Help!

      By ChoppedSpots · Posted

      Thanks for the replies guys, it's really appreciated.  It seems the kit was supposed to come with those injector bosses but hasn't. Unsure if they'll help as even with the adaptors to make them a 3/4 height injector they still sit too far out so mount the fuel rail?
×
×
  • Create New...