For Sale Thread

[Rbware]

New Z32 afm Plugs with long wire $30..

[Aberax]

For Sale/Trade

6 x Nismo 740cc sidefeed Injectors

Have been cleaned and flow tested - all 100%

Currently installed in my car (RB25DET S2), am wanting to either sell for $850 ono...or Trade for 6 (Six) Nismo 550cc Sidefeed Injectors that have also been flowtested.

Pm for more details.

[KayN]

got a R33 Series 2 Spoiler (white) Perfect condition for $100 , dont need the spoiler anymore got a different one, pick up only!

PM me if interested..

[nisskid]

Part are located near Mitcham

Suspension/Steering

R32:

2x Front Sway Bar - $50ea

1x Front Complete upper control arm assembly (passenger side) including bracket and king pin bearing, urethane bushing - $100 -- PICS PICS

2x Front Camber Arms - $40ea -- PICS

2x Front Passenger side Lower Control Arm - $60 -- PICS

1x Front Tie Rod End - $10 -- PICS

2x Rear Traction arms - $35ea -- PICS PICS

2x Rear Camber arms - $35ea -- PICS

2x Rear Lower Control Arms - $60ea -- PICS

2x Rear sway bar links w/ Urethane bushes - $15ea -- PICS

2x Rear Hubs - $100ea -- PICS PICS

1x Rear Sway Bar - $50ea

2x Rear Toe Rods (non-hicas) - $35ea -- PICS

S13:

2x Rear Traction arms - $35ea -- PICS PICS

2x Rear Camber arms - $35ea -- PICS

2x Rear Toe Rods (non-hicas) - $35ea -- PICS

Misc

R32

1x Horn, can be hooked up to any car - $20 -- PICS

2x Stock Clutches, 1 half warn, one fair bit more warn - $30 and $70

1x Stock Rear Spoiler (with brake light) - $50 -- PICS

3x RB20 Coilpacks - $30ea

1x Turbo Timer, very basic timer, manual set - $20

1x RB20 Fuel Pump - $40 -- PICS

1x Igniter Module (breaks down under a lot of heat) - $30 -- PICS

Random shit

1x Handbrake lever - $5 -- PICS

5x Hub Covers - $20 -- PICS

[DannR33]

hey mate i would be very keen if it could be confirmed to fit the r33 is there anyway of finding out?

cheers dan

[skylineguy19]

your keen on what?

[RubyRS4]

Stagea/33/34 radiator ... 64,000kms old .... good condition ... $150

Malpassi FPR ... used condition ... noisy on start up and hard to adjust ... don't know much about them sorry ... $50

Stagea in tank fuel pump ... 64,000kms old ... works well ... $80

R33 4 door Skyline ... 133,000kms ... runs great ... $8,500

PM me

[sskylinee]

R34 manual turbo sedan for sale

silver

1998

81,000kms

in good condition

$16,250

pics in the link below

CarSales ad

sms or call me for quick reply 0411 758 793

cheers

Nhan

[Dohmar]

Expressions of Interest

Group Buy - Siemens Deka fuel injectors

I ordered 6 injectors from Miami last fortnight and they arrived here in rapid time. Ended up costing me $360 for a set of 6 575cc injectors for my RB26dett (low impedance, top feed). A couple of members here are considering getting new injectors, so I was wondering if anyone is keen to join the purchase and maybe get a discount (maybe... $360 is pretty cheap as it stands, as it's half as much the australian distributors want for the exact same injector).

Sizes are from 300-1300cc, top feed only but either low or high impedance

PM me if you're interested - this is a once off and I won't be doing a repeat order.

-D

EDIT - He does do RB25 Neo injector top feed conversion packages for around $600 that include a fuel rail, 850cc injectors, ev6 and ev1 adaptor and seals

I'm extending this offer for cheap injectors indefinately. Seems I've come to a good understanding with the distributor in the USA who is more than happy to continue selling injectors to us.

I can get any size injectors, from 300-1300cc, both low and high impedance, both top and side feeds. Can obtain injectors for any Nissan and Toyota engines, as well as GM V8's.

Note, I will not be making any money of this venture, however any orders placed individually will incur a higher cost for shipping.

Prices range from around $360* for 550cc injectors up to $500* for the hardcore 1000cc multi nozzle injectors (set of 6 - can also do sets of 4, 8, 12 or whatever you require)

If I get enough interest, I'll purchase stock for emergency use/quick sales.

PM me if you would like more details. Current brands sold so far are Siemens-Deka, Lucas and Delphi. Technical specifications are available upon request, and all injectors are flow matched within 1% tolerance of each other.

-D

*** Please note that these prices are estimates based upon the last 3 orders I've placed at the current exchange rate with the US dollar. They may rise or fall given the strength of the greenback vs the AUD.

[JMW]

will be in contact Ben, once i check a few things out

[Madaz]

yes i too would be keen one day

[nisskid]

got some whiteline urethane subframe bushes (pineapples) out of my car that i dont need anymore. for anyone who doesn't know these tighten up ur rear end without making it harsh, awesome solution for street cars, reduces axle tramp and lets u align ur subframe for squat, neutral or anti-squat.

according to the whiteline site, these will fit most nissans, S13/S14/S15 R32/R33/R34 GTS, GTR etc etc Ceffy, laurel etc etc even N14 pulsars it seems.

Price:

$80

Pics:

[stageaharts]

Items:

Dual Solenoid Blitz SBC Spec R Boost Controller

Item Condition:

Used, Good.

Extra Info:

Upgraded to SBC ID-III, this is wasted sitting in a box

Contact Details:

PM me.

Price and price conditions:

$280 + Postage (Or pick-up)

Items:

RAYS Engineering Dura-Nuts in Blue, Normal length type.

Item Condition:

Used, Average (Rattle Gun damage.). See pic.

Extra Info:

These are still on my car, which is at the body shop. I expect the car back from the body shop at the start of next week. I am upgrading them with the same nuts, in the Long type. There are no lock nuts with these, just 20 Rays wheel nuts, they retail on JustJap.com store for $275... shoot me an offer

Contact Details:

PM me.

Price and price conditions:

$90 + Postage (Or pick-up)

[Rbware]

I have a Apexi Power Fc for sale to suit a 1993,94 R32 Gtr & R33 Gtr no hand set . $850 .

[Weezy]

I think all BNR32/BNCR33 PowerFC's are the same Shane.

[nicr4wks]

Lilliput 629GL 7" VGA Touchscreen for CarPC in double din mount - $290, might consider swap for decent single din headunit.

Original box, stand, remote and casing included.

Dimensions of double din mount:

Width: 177mm

Height: 107mm

Depth: 71mm

Touch Screen: four-wire resistive touchscreen

Inputs: 1 VGA input and 1 RCA input, 1 AUDIO input

Built-in Speaker

Infrared Remote Control

Input Voltage: DC 11-13V

Power Consumption: <8W

Screen size: 7 inches diagonal

Physical dimensions (in): 7.33W x 5H x 1.5D

Ratio: 16:9 wide TFT screen

Native Resolution: 800x480

Resolution Range: 640x480 up to 1280x1024

Dot Resolution: 2400 x 480 (= 1,152,000 dots)

Color configuration: RGB stripe

Video system: PAL/NTSC

1 Video input plus 1 Audio input

VGA input

Touchscreen display (USB interface)

IR remote control

Full function OSD control (Multi-language)

Audio output: Speaker built-in

Video input signal: 1.0Vp-p, composite video

High resolution and no radiation

Computer display/S-video/DVD/VCD/Security system/Navigation system compatible

(Rear view camera connectible)

Mount type: Dash board

Power input: DC 12V

[Aberax]

Lilliput 629GL 7" VGA Touchscreen for CarPC in double din mount - $290, might consider swap for decent single din headunit.

Original box, stand, remote and casing included.

Dimensions of double din mount:

Width: 177mm

Height: 107mm

Depth: 71mm

Touch Screen: four-wire resistive touchscreen

Inputs: 1 VGA input and 1 RCA input, 1 AUDIO input

Built-in Speaker

Infrared Remote Control

Input Voltage: DC 11-13V

Power Consumption: <8W

Screen size: 7 inches diagonal

Physical dimensions (in): 7.33W x 5H x 1.5D

Ratio: 16:9 wide TFT screen

Native Resolution: 800x480

Resolution Range: 640x480 up to 1280x1024

Dot Resolution: 2400 x 480 (= 1,152,000 dots)

Color configuration: RGB stripe

Video system: PAL/NTSC

1 Video input plus 1 Audio input

VGA input

Touchscreen display (USB interface)

IR remote control

Full function OSD control (Multi-language)

Audio output: Speaker built-in

Video input signal: 1.0Vp-p, composite video

High resolution and no radiation

Computer display/S-video/DVD/VCD/Security system/Navigation system compatible

(Rear view camera connectible)

Mount type: Dash board

Power input: DC 12V

You have to sell this when i have no money

[nisskid]

got some whiteline urethane subframe bushes (pineapples) out of my car that i dont need anymore. for anyone who doesn't know these tighten up ur rear end without making it harsh, awesome solution for street cars, reduces axle tramp and lets u align ur subframe for squat, neutral or anti-squat.

according to the whiteline site, these will fit most nissans, S13/S14/S15 R32/R33/R34 GTS, GTR etc etc Ceffy, laurel etc etc even N14 pulsars it seems.

Price:

$80

Pics:

sold

[Madaz]

I have a Apexi Power Fc for sale to suit a 1993,94 R32 Gtr & R33 Gtr no hand set . $850 .

good option for RB25 guys also, i currently run a GTR pfc pro in my RB25det

Shaun at boostworx knows the wiring up procedure to have a hybrid ecu

[nicr4wks]

You have to sell this when i have no money

I guess you'll also be happy to hear that it's sold

You can grab all the gear from mp3car and bybyte when the time comes, it'll be closer to $400 to get everything new though