Jump to content
SAU Community

For Sale Thread


Cubes

Recommended Posts

some bits and pieces for sale that ive had hanging around (and the sheds getting a bit cluttered)

pics on request (i have some but camera batteries went flat).

contact via PM or my number if u have it

R32 GTR interior

Interior trim parts that ive removed from my race car

Carpet

B pillar trims

C pillar trims

Rear 1/4 window trim

Rear seats

Front seats (located at virginia at the current moment)

Boot carpet

Boot plastic trims

Boot "floor"

Headlining, door trims, map light, interior light and dash still in place for now. Parcel shelf is already sold

Looking at $900 for the lot (or will work out deals for someone who doesnt want everything)

Other parts

R32 GTR FRONT only brakes (Sumitomos)

Rotors (reasonable meat left), calipers, pads (condition / brand unknown), stock lines

$300 negotiable

HKS Mechanical gauges (52mm)

Oil Pressure, Oil Temperature and Water Temperature

Complete with wiring for lighting. One gauge (oil temp i think) doesnt light up, didnt ever check why)

No instructions, but i know which temp gauge was which lol

$200 for the lot

HKS recall / warning boost gauge (big motherf**ker)

With lines, wiring etc, no instructions but the important wires seem to be the longest

$100

Mines "LCD boost meter"

pretty flash looking jobbie, digital boost gauge readout. LCD on the display is slightly damaged, but still reads alright

comes with control box and wiring, just plug boost line into the back of it

$80

Blitz BOV mounted to a solid pipe (S13 CA piping apparently). Never used since i bought it at Drift Supercup second hand off a trade stall

$100

Interior parts now down to

Front Seats ($600 for pair, $400 each)

Rear Seats ($350)

Rear under window trims ($50 each)

Ohter parts still available

Link to comment
Share on other sites

For sale as a package is the following

Uniden "Bearcat" UBCT-8 250 Channel Scanner (pre-programmed for Metro SA)

GME AE4018K1 antenna with 3ish metres of cable (and plug)

Small external speaker and cable

Plug will need to be re-soldered onto the cable as thats the only way i could remove the antenna from the car

Scanner also comes with small telescopic antenna (for out of vehicle use) and 240v power adapter

Pre programmed for metro Adelaide (and you get lucky about 100km radius on occasion) with:

SA Ambulance Service

SA Metropolitan Fire Service

Country Fire Service

State Emergency Service

plus airband channels for Adelaide Airport and Parafield Airport

programming was done by Electric Bug at Croydon

pic of it as in car, fits nicely in a DIN slot with no need for mounting bracket (firm fit)

best pic i can find of it, below CD player

more details about the unit itself can be found here: http://www.uniden.com.au/AUSTRALIA/p_ubct8_index.asp

$250 NEG. still in the car, but most of ya have seen me playing around with it ;)

Link to comment
Share on other sites

DEFECTED 4door 32

fruitylicious-PERFECT TRACK WEAPON

post-70645-1288522952_thumb.jpg

ENGINE

-120,000 klms

-custom turbo ( ats )

-greedy fmic, truck clamps

-Earls oil cooler an relocator

-dose pipe, afm relocated

-screamer am, strate pipe

-power fc an controller

-hks evc5

-adjustable cam gears inlet an ex

-walbro pump

-brand new headgasket, belts and lines

SUSPENSION

-npg coils in front

-isc in rear

-whiteline front an rear sway, extra bracing

-strut brace front an rear

-brake stopper

-33 lcas

-hicas lock

-kkr camber

-kkr castor

INTERIOR

-kenwood mp3

-kenwood speaker fr an rear

-greddy indiglo boost gauge

-shift light

_FREEZING COLD AIR_

EXTERIOR

-weathershields

-custom 1 of side skirts

-pods

-custom front bar

-roof wing

-passenger side rear quarter seen a white reflector post !

JUST SERVICED WITH ALL FLUIDS AN EXPENSIVE OILS , oil changed monthly til now

Asking $10k will remove parts to make cheaper or swap for stockish S14

PLS ME ME IF INTERESTED !

Edited by PROXIMITY
Link to comment
Share on other sites

you cant legally sell a defected car

of course you can otherwise wreckers would be empty it can be sold to make a track car or to be parted out . ive bought a defected car and had the defect removed and the rego changed over with the old owners help .

nothing is impossaible

Link to comment
Share on other sites

He said legally though Adrian was warned by the po po for buying and selling a defected car. We all know theres ways around most things.

you can legally sell a defected cars to the wreckers . you can legally sell a defected car if it's not going back on the road . and we all the know the po.po aint right all the time every time :-)

Link to comment
Share on other sites

1- Blackberry storm 9500.

had for about 12-13 months. works perfectly fine, never had an issue. its a vodafone locked. only selling due to getting a iphone4.

comes with box, leather case, charger, mini usb cable and all the manuals and CD.

$200.

2- Blackberry Pearl

used this for about 12months. been sitting in the box for another year (2 years old)

same as above, works perfect. comes with box, charger, usb, manuals and CD.

$100

i can mms pictures to anyone interested.

pick up can be arranged from west subs or meet somewhere close.

or buyer pays post.

cheers,

Adrian

Link to comment
Share on other sites

Apexi dual N1 exhaust, decided to go back to my old single 3 1/2", has small dent on center muffler but still in excellent condition. Excellent exhaust, great flow and sound $550.

http://www.apexi-usa.com/products/?id=5509

Best to message with the hours im working. 0413 697 162

Still up for grabs

Link to comment
Share on other sites

Hey guys I have a shed full of stuff I no longer need so have a look through and see if theres anything u need and give me a text, call or pm if u are interested in an item/s.

GENERAL ITEMS

1) mint full set of Buddy Club P1 racing wheels in hypermax gold with good condition Kumho KU36 semi-slicks all round plus Work annodized valves. $1300.

17 x 9 + 37 & 17 x 8 + 32 255/40/17 & 235/45/17

2) full set of ISC N1 coilovers for R33 GTS-T. 12kg front, 8kg rear. Immaculate condition, recently purchased and stripped off a car I bought. $800

3) pair of 25mm spacers (5 x 114.3) $90

4) Immaculate condition Garret 2871R "disco potato" for SR (no lines included) $800

R32 ITEMS

1) RB Nismo Super Copper Mix rigid Clutch plate with Nismo 860kg Heavy duty pressure plate with RB fly wheel $350 post-4555-1290052740_thumb.jpg

2) L/H front vent for R32 $50

3) R32 GTR door trims $90

4) pair of R32 stock front lower control arms $30

5) pair of R32 stock rear upper camber arms $30

6) pair of R32 stock front castor arms $20

7) R32 stock side mount cooler $20

8) R32 GTS-T stock rear wing (silver) $10

9) R32 glove box $20

10) R32 driver and passenger interior front section (above door) $30

11) R32 stock orange side indicators $15

12) R32 dash cluster $50

R33 ITEMS

1) R33 series 1 afm with pod filter $50

2) R33 series 2 afm $50

3) pair of R33 stock front castor arms $20

4) R33 glove box. immaculate condition $30

5) R33DET (RB25) Tailshaft $90

6) R33 interior gearboot and surround $30

7) R33 drivers side dash vent $50

8) R33 centre dash vent $80

9) RB25 aftermarket manifold (brand new) $200

10) RB25DET Series 2 coilpacks, mint condition, $80 (all 6)

11) R33DET stock diff, condition like new $90

12) pair of R33 rear drive shafts (rear axels) $100

13) R33DET power stearing rack $50

14) R33 centre consol $40

15) R33 driver and passenger interior front section (above door) $30 post-66618-1290053617_thumb.jpg

16) R33 rear interior upper section $40

17) R33 rear interior lower section $40 msg-34341-1290061065_thumb.jpg

18) R33 dash cluster $50

19) R33 series 2 engine x-member plus brackets (lowest RB engine drop / conversion for silvia) $180

20) R33 rear cradle (all arms - no hicas, hubs, diff or axles) $150

21) R33 brake package, mint with plenty of meat (all 4 rotors, hubs, calipers, knuckles and front uprights) $700

22) R33 stock exhaust manifold $20

23) R33 front strut brace $15

24) R33 rear strut brace $15

25) R33 passenger side front guard (white) $30

26) RB25DET series 2 Ecu $100

27) RB25DET standard clutch, pressure plate and flywheel (condition like new) $150 msg-34341-1290061343_thumb.jpg

28) RB Nismo Super Copper Mix rigid Clutch plate with Nismo 860kg Heavy duty pressure plate with RB fly wheel $350 post-4555-1290052740_thumb.jpg

Please contact me on 0400 259 598

Cheers

Chris

post-57119-1288610346_thumb.jpg

post-57119-1288610377_thumb.jpg

post-57119-1288610402_thumb.jpg

post-57119-1288610433_thumb.jpg

post-57119-1288610455_thumb.jpg

post-57119-1288610473_thumb.jpg

post-57119-1288610510_thumb.jpg

post-57119-1288610549_thumb.jpg

post-57119-1288610573_thumb.jpg

post-57119-1288610604_thumb.jpg

post-57119-1288610632_thumb.jpg

post-57119-1288610651_thumb.jpg

post-57119-1288610670_thumb.jpg

post-57119-1288610688_thumb.jpg

post-57119-1288610708_thumb.jpg

post-57119-1288610732_thumb.jpg

post-57119-1288610750_thumb.jpg

post-57119-1288610774_thumb.jpg

post-57119-1288610805_thumb.jpg

post-57119-1288610828_thumb.jpg

post-57119-1288610855_thumb.jpg

post-57119-1288610874_thumb.jpg

post-57119-1288610912_thumb.jpg

Link to comment
Share on other sites

for sale:

bosch 044 $180 brand new

enkie 17 x 9 or 9.5 unsure, say: bnr33 n1 racing inside

with 4x bridgestone re55 semis slicks. just above wear bands and a fair few good laps in them if rotated correctly

currently fitted maxxis z1, fronts pleanty of meat. rears about 2mm above wear bands.

$1800 ono for rims with tires + very good semi slicks

post-27156-1288705384_thumb.jpg

Link to comment
Share on other sites

for sale, pm me please:

1x single working rb26 r32 gtr afm air flow meter, $70

one pair slotted 280mm discs, suit r32 gtst or stagea s1, $50

one pair rear Skyline/Stagea/Silvia/300zx braided brake lines, adr tag approved, Maltech brand, fits nissan, tighten up rear brake feel, $100

1x r32/33 passenger Bride seat rail, $120

clean rear r32 seats, with seatbelts, $40 bargain

rear r32 wing, grey with LEd brake light, $20

RPM 5-point racing harness, 3" straps, $50

ZX9R Ninja stock exhaust muffler, $50

Link to comment
Share on other sites

POST UPDATED WITH SOME PICS

some bits and pieces for sale that ive had hanging around (and the sheds getting a bit cluttered)

contact via PM or my number if u have it

R32 GTR interior

Interior trim parts that ive removed from my race car

Rear 1/4 window trim (lower rear passenger trim)

Rear seats

Front seats (located at virginia at the current moment)

Rear trims - $70 pair

Rear seats - $250

Front seats - $500 for pair or $350 each

Other parts

R32 GTR FRONT only brakes (Sumitomos)

Rotors (reasonable meat left), calipers, pads (condition / brand unknown), stock lines

$300 negotiable

HKS Mechanical gauges (52mm)

Oil Pressure, Oil Temperature and Water Temperature

Complete with wiring for lighting. One gauge (oil temp i think) doesnt light up, didnt ever check why)

No instructions, but i know which temp gauge was which lol

$200 for the lot

001.jpg

HKS recall / warning boost gauge (big motherf**ker)

With lines, wiring etc, no instructions but the important wires seem to be the longest

$100

003.jpg

Mines "LCD boost meter"

pretty flash looking jobbie, digital boost gauge readout. LCD on the display is slightly damaged, but still reads alright

comes with control box and wiring, just plug boost line into the back of it

$80

004.jpg

Blitz BOV mounted to a solid pipe (S13 CA piping apparently). Never used since i bought it at Drift Supercup second hand off a trade stall

$100

005.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
    • @99RS4just wondering if you ever took photos of the footwell lighting / how you bypassed the controller, im keen to haver footwell lighting come on when I open the doors too   
×
×
  • Create New...