Jump to content
SAU Community

Recommended Posts

Think im keen to sell the 31 now make some money bak to get this tune and shit for the 32 open to reasonable offer pm me

r31 silouette

rb25de+t

boost controller stock boost

front coilovers

s13 lcas

Garage 7 tie rod ends

Lock spacers

huge front sway bar

all bushes been replaed withn noalthane

all lights work

sr20det front brakes

new pads and rotors allround calipers rebuilt

5 spd manual heavy duty clutch

new exhaust sytem setup for street or track

depending weather u want to track it or street it it may need some work pm me !

Edited by Ke55pig

HKS EVC 4 v2 with display, comes with everything needed to install, silver face

in pretty good nic, bought it off lewis with the 4 door, planning on fitting it before my tune today but ran out of time to get 100% so went with a boost tee. easy to fit and set up, had auto learning which has already been done. suit external and internally gated turbos.

http://www.nengun.com/hks/evc-iv

after $450ono, slightly neg

pm or post here

Items:

1989 R32 gts-t sedan

Item Condition:

Excellent condition

Extra Info:

Has had a full regency roadworthy check.

tint removed for regency.

185xxx kms on clock..155xxx on engine

Power FC

Gtr injectors

Garrett hiflow turbo – custom made by Rotomaster

full 3inch turbo exhaust and hi flow cat – batmbl split front/dump, xforce 3inch cat convertor and tanabe medallion catback

splitfire coilpacks

JJR return flow intercooler setup

Walbro 500hp fuel pump

Apexi cam gears

Gates racing timing belt

Standard airbox with blitz panel filter

Gtr bov

MSpec dual core alloy radiator

extedy HD clutch

Contact details:

michael - 0400089213

[email protected]

Price and price conditions:

$12,000 ono (no Swaps)

edit1ll.jpg

edit3e.jpg

ALL PRICES ARE AS PAIRS

15"

2x 195/60 - Maxxis Radial UA-603 - 90% tread - $100

16"

2x 205/45 - Yokohama C.Drive - 95% tread - $130

2x 205/55 - Goodyear Eagle NCT - 50% tread - $60

2x 205/55 - Nexen/Michelin (mismatched pair) - 60-70% tread - $70

2x 225/50 - Sonar/Yokohama (mismatched pair) - 70-80% tread - $80

2x 225/50 - Sumitomo/BJ (mismatched pair) - 50-60% tread - $60

17"

2x 205/45 - Michelin PilotPreceda - 60-70% tread - $80

2x 205/50 - Bridgestone Potenza RE040 - 60% tread - $70

2x 225/45 - Pirelli Dragon - 40-50% tread - $50

2x 225/45 - Hancook/Potenza (mismatched pair) - 40-60% tread - $50

2x 225/45 - Bridgestone Potenza Adrenaline - 60% tread (slight outer edge wear on one) - $70

2x 235/45 - Nexen's - 60% tread - $70

2x 235/45 - Firestone firehawk - 60% tread - $70

2x 255/40 - Falken FK452 - 85% tread - $140

2x 255/40 - Falken Azenis ST215 (SEMI SLICK) - 50-60% tread - $120

2x 255/40 - Michelin/Nankang (mismatched pair) - 40-50% tread - $50

18"

2x 215/45 - Bridgestone Potenza RE050A - 50% tread - $70

2x 225/40 - Dunlop Sport Maxx - 60-70% tread - $90

2x 225/40 - Bridgestone Potenza RE050A - 60-70% tread - $90

2x 235/40 - Potenza/Nankang (mismatched pair) - 60-70% tread - $80

4x 245/45 - Bridgestone Potenza RE050A - 60-80% tread - $80-$100

2x 255/35 - Bridgestone Potenza RE050A - 60% tread - $80

located near mitcham in SA

4x Chrome "Starcorp" Rims 5 spoke 5 Stud Deep Dish New Tyres

they are 18" 235/40/R18 and have just over a 2" Dish

came off a R33 Skyline so will fit any model car with the same 5 stud pattern as a r33 such as 200sx silvia etc...

Rims themselves are in great condition very minor rash or none at all on 2 of the rims!

selling as have no need for them anymore

will swap for "DRIFTEKS"

$850 O.N.O need gone! make an reasonable offer!

and

Dual 3" Catback Exhaust system to suit R33 Skyline GTS-T

comes in 2 pieces great note to it not stupidly loud need gone have new exhaust

$100

0434843400

post-66876-0-08777700-1297845620_thumb.jpg

post-66876-0-79459000-1297845643_thumb.jpg

post-66876-0-30962100-1297845753_thumb.jpg

hey guys.. got this 4sale..

http://adelaide.gumtree.com.au/c-Cars-Vehicles-Motorbikes-Parts-parts-accessories-engine-engine-parts-transmission-EXEEDY-CLUTCH-LESS-THAN-500KS-TO-SUIT-RB-SKYLINE-SILVIA-DRIFT-W0QQAdIdZ259539237

its an exeedy clutch basicly new!!

we have used them on rb30 and rb25's with up to 350kw drift cars with out dramas in the past. great clutch imo

oh and this as well...

http://adelaide.gumtree.com.au/c-Cars-Vehicles-Motorbikes-Parts-cars-MITSUBISHI-PAJERO-WITH-HOLDEN-V6-4WD-4X4-CUSTOM-POWER-W0QQAdIdZ260371417

my beloved pajero... it has a holden 3.8L v6 convertion, is a dream to tow with!! plust there is lots of fun to be had with it too :D

suss the link for contact details

cheers!! :D

Ok, i know this is slightly against forum rules. But have a BN style body kit up for sale for a friend, brand new never fitted to suit R32 4 door. Complete kit including front bar, rear bar and side skirts. Kit is in excellent condition and as i said, has never been fitted to the car, just taking up shed space. $1400 ono $800 ono

Either Contact me via PM or call/message 0413697162

bride drivers side recliner rail suit r32/r32/a31 - $50

post-16535-0-30517900-1297985804_thumb.jpg

sard FPR brand new with guage - $100

post-16535-0-67711000-1297985826_thumb.jpg

rb25det purple top stock injectors, working fine, even good for high flowing - $100

pics on request

rb20/25 highmount manifold with 38 mm wastegate provision - $100

post-16535-0-47769500-1297985832_thumb.jpg

turbosmart 38mm wastegate - $150

post-16535-0-58108800-1297985821_thumb.jpg

sont dsc-T20 camera with 2gb card - $150

post-16535-0-25096400-1297985816_thumb.jpg

engine stand, pretty much brand new - $80

SAAS vaccum gauge - $20

pics on request

PS3 DJ hero jz/eminem renegade edition, comes with everything - $120

Ps3 guitar hero metallica, comes with game and guitar (all thats needed) - $50

HSD HR Coilovers - $1200.

AMPerformance Full Stainless Steel Exhaust - Split Dump, straight though with HFC & Blastpipes - $1100.

Full R34 Nistuned ECU - $500+Standard Ecu.

Velo Podium 2 Fixed Bucket Seat With Mounting Bracket - $1000.

Bronze Work Xd9's 18x9+30 18x10+18 - With current tires and a spare - $2200.

Factory Option R34 Fourdoor Monsoon Shilds - $300

KKR Pineapple Bushes - $60

12" Soundsteam Taranchula Subwoofer inbox - $300

Contact via PM or 0432 581 798

Brand new AM Performance Catch back exhaust to suit R33 GTSt or GTR, is not too loud, high quality item. has twin baffled pipes also. $800 fitted if your in SA.

184002_1761717396111_1034359196_1943850_3292836_n.jpg

Apexi BOV with hard pipe to suit SR.. pretty old school but its bearly been used and is all metal construction. none of the cheap plastic shit that you see on the market today, $120 + 10 postage if interstate

180124_1761720036177_1034359196_1943854_5682619_n.jpg

Contact me via PM or sms 0412 938 933

selling my HKS 2540

.64 rear housing

.46 trim

T2 flange

good condition

$1200 ono

also got a set of AVS model 5's, 5 stud 114.3 PCD

18x7.5 and 18x9, think there +35 offset, tyres are stuffed, have some gutter rash

$400ono

0411160974

For Sale:

Whiteline Front Strut Brace suit R32 - $50.00

BenQ FP222w 22in LCD, 5ms response - $50.00

R32 Leather Gear & Handbrake boots with GTR logos - $40.00

R32 GTR N1 Style side skirt pods (non genuine) - $50.00

R32 GTR Centre gauge OEM replacement cover - $30.00

Items located at Victor Harbor, can organise delivery to the city.

PM or contact on 0415117115

post-34010-0-99130000-1298005545_thumb.jpg

post-34010-0-50692700-1298005554_thumb.jpg

post-34010-0-39400900-1298005796_thumb.jpg

post-34010-0-11577500-1298005809_thumb.jpg

Hey guys up for sale is a pair of three month old monza racing seats,

These are adr aproved with correct tag on them,

i was origanly gonna put them in my 32 but cbf atm and would rather sell them,

They come with some random rails when i bought them they were on the seats, they will be included in the sail.

Pm me to arange inspection,

asking price : $450 but im negociable

will swap for aftermarket coilpacks for rb20det, eg splitfire, yellow jackets

Cheers

Pics

post-59106-0-90691000-1298096408_thumb.jpg

post-59106-0-49459700-1298096505_thumb.jpg

bride drivers side recliner rail suit r32/r32/a31 - $50

post-16535-0-30517900-1297985804_thumb.jpg

sard FPR brand new with guage - SOLD

post-16535-0-67711000-1297985826_thumb.jpg

rb25det purple top stock injectors, working fine, even good for high flowing - $100

pics on request

rb20/25 highmount manifold with 38 mm wastegate provision - $100

post-16535-0-47769500-1297985832_thumb.jpg

turbosmart 38mm wastegate - $150 - ON HOLD

post-16535-0-58108800-1297985821_thumb.jpg

sont dsc-T20 camera with 2gb card - $150

post-16535-0-25096400-1297985816_thumb.jpg

engine stand, pretty much brand new - SOLD

SAAS vaccum gauge - $20

pics on request

PS3 DJ hero jz/eminem renegade edition, comes with everything - $120

Ps3 guitar hero metallica, comes with game and guitar (all thats needed) - $50

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • There are adaptors that allow you to delete the booster and use an s15 clutch master cylinder.    if you want to keep the booster they are still available brand new 
    • I visited again today: It would appear they have painted the main body of the car and some parts of some of the panels, so I can say that I now have BMW parts in my car, much to the envy of @Dose Pipe Sutututu It is still covered in dust which is quite the tease but I did look at a few circumspect spots that will be behind bumpers and such and wiped some dust away: After my repeated begging to PLEASE DONT PAINT OVER THE ENGINEERING CERTIFICATE (you have to re-engineer the entire car if they do) I see THIS: Which is great. Excellent job tbh at least to me. A better non dusty example would be the backs of the doors that have been painted: Giving a reasonable contrast between old and new (I know the old isn't clear coated on the inside of doors). The door card will well and truly cover where the old paint is, you can see in the second pic some of the black butyl/whatever shit is sticking the plastic sheet behind the door transfer that has happened since it's clearly been stuck back on. The most maddening thing about this colour is every time I saw it in the wild it looks like another colour, same with photos of many cars with the same colour looking wildly different in every photo anybody ever takes and this is no exception. But stand a little further back and it suddenly looks dark AF. I did tell them when I was discussing which of the 70 million charcoal colours to choose from (a porsche one, a BMW one, or a R32 GTR one etc) that if they just ignored me and chose one at random I would probably never notice. Maybe they did. But the colour is supposed to be B39 (BMW Mineral Gray). Boring I know, but the R34 sedan (to me) really shows off it's boat-ness when you paint it in a bright colour like bayside blue or white or whatever else. I do have a fondness for AR2 Nissan Red, but decided against that because it'll have pretty odd contrast to random bits unpainted (like engine bay, bits of trim etc, and maybe it'll fade). And people will always fkin comment on AR2. Everything remains super dusty. I have tracking numbers for the new heads, as well as some Improved Racing goodies, but they probably will be a next year thing by the time they end up on the car. I did some maths on the heads and I know why nobody goes to this extent in Australia, because it's really not worth it, given I could have just CNC'ed my current heads, bought a FAST102/TB and used my current rocker/spring/cam combination and get a 383 stroker (or stroked a 6.0 GenIV bottom end to 6.6L) built for the same price of just the setup in the mail/on the floor here. Or I could have bought a LS3 and a Drysump system. And then have a complete engine to sell. Oh well
    • We just disconnected the vacuum line if I remember correctly, booster is still there. Is there a rebuild solution for the booster or a different adapter that will work for GTR chassis?
    • Yeah 4wd (boosted) has a recess in the firewall for the booster, and 2wd is flat - the example in the link shows the flat surface. When you deleted the booster, did you just attach the factory slave cylinder directly to the recess in the firewall with no adaption?  
    • Yes, but no. You need to keep the mating surfaces bare (ie the flat faces where the caliper and upright pads touch the dogbone) and also the internal threads will remain bare (unless there are no internal threads - do they use nuts on all the bolts?). So you can slow down obvious external corrosion, but not all of it. Anodising would be required to provide decent protection to the alloy, but I'm not actually sure if you should anodise something that is all about the strength. Anodising does reduce strength significantly. Like, up to 50% on some alloys for high thickness coating.
×
×
  • Create New...