Jump to content
SAU Community

Recommended Posts

A few things i have for sale that are no longer needed.

Firstly is a Blitz active type clutch which is a twin plate clutch built by ORC for Blitz.

It can be used as a single or twin plate and is one of the only clutches to be able to do so.

I have had it in my car for the last three years and it has done under 5000km of City driving it has never been tracked.

I am asking $1200 firm as it cost me $3000 when i bought it.

It comes with clutch, bearing carrier, thrust bearing and flywheel bolts.

R34 GTT front and rear rotors with plenty of meat still on them - $200ono

Diff 1:

R32/S13 type with ATS 2 way lsd and 4.08 ratio. absolutly mint condition in side and out. has 5 bolt half shaft ends. $750

Diff 2:

S14/r33 type with Tomei Trax 2 way LSD and 4.1. absolutly mint condition LSD was rebuilt with a new set of clutch disks 12 months ago and comes with yet another rebuild kit free with it. has one half shaft missing. hence the cheaper price. $600

located Adelaide SA. if interested please PM me or sms me 0412 938 933

Edited by Simon-S14

Shift 2 for the Playstation 3 - $80 firm and I'll throw in Hot Pursuit FREE for the PS3 aswell! :thumbsup: both in AS NEW condition

5e4a99a78045.jpg?1291097226

jaquette-need-for-speed-hot-pursuit-playstation-3-ps3-cover-avant-g.jpg

Still for sale! Price firm. Pick it up now for entertainment over the epic long weekend coming up :thumbsup:

for sale:

CST hyper zero 1.

4x 18x9.5 +15

4x federal 595ss (approx 80%)

wheels have minor marks on inside of wheel stud holes from fitment but nothing major..

only selling to make way for some 18x10.5

$2200 firm, otherwise i wont sell!

Does anyone need a rear door drivers side glass window for an R33 4 door?

Didn't even know I had it still.

You can have it if you want it. Moving in a week, so get it quick before I smash it in the skip!

FFFRRREEEEEEEEEE!

Gizzmo Dual Stage Shift Light - $100

post-3189-0-16674200-1302337958_thumb.jpg

R32GTR Rear Brakes $200 - Brake ducts / genuine nissan rotors / Endless Pads / braided lines / rebuilt calipers excellent condition

RB26 ACL Head Gasket - used but good condition and REUSABLE. $80

post-3189-0-99625000-1302338371_thumb.jpg

Free fitting for the shift light - this weekend only!

I have an rb26 that would suit a rebuild, just seeing if anybody is intrested.

The engine is at my mechanics workshop and if somebody shows some intrest i can arrange photos or to come have a look.

it came out of a R32 GTR with a build date of 11/93 so it should have the long nose crank, it didnt spin a bearing it blew a turbo and now no3. or 4 cylinder is at about 50psi compresion and is scored relativly badly.

i dont have the turbos but have the rest, the block hasnt been opend up so dont know how it looks inside. it had 60k km on the engine when the turbo went.

$1800 for everything but can seperate if have enough intrest on most parts.

send me a pm or u can text me on 0403764628.

Thanks

Tim.

FOR SALE

set of stock alloy r33 gtst rims and tyres 205/55s slight camber wear but have good treads all round 50% minimum

$200 ono

17inch multi spoke style rims with crappy tyres ( fun to finish off ) slight stud damage to one rim

would come up a treat if powder coated i got a quote from ollier powder coating for $200

$200 ono

text for pics 0413863525

For Sale: R33 GTST 1995, 101,000kms, $ 13,000 (Nego)

Contact me/ sms: 0402935588

Exterior:

Front fiber glass bumper

Side Skirts

18 Inch Crome wheels, front: 235/40/18 , back: 255/40/18

Engine bay:

BMS racing pod filter

HKS BOV SSQV 3

Front Strut bar

ARC intercooler

NISMO cap

Walbro fuel pump installed

Complete car alarm system installed

Power 200kws at the wheels with 14 psi boost.

Exhaust:

3 inch front pipe

3 inch high flow cat Standless steel

3inch X-force muffler Standless steel

3 inch pipe from front to back with 5 inch drift cannon muffler on the back.

how does it sound ? perfectly awesome

Interior:

Solid Purple colour paint

Stock seats and looks like new , front and back

Drift digital boost gauge with drift black case

Greddy boost controller pro spec 2 , dual stage

Window tinting 20 percent / 35 percent , front and back

Steering wheel replaced 3 month ago with air bag type

momo racing gear knob

racing pedal

kenwood 700 w amplifiers support x4 speakers

Battery replaced with maintenance free type

NISMO Dashboard meter , show 300km/h

Plate: NISMO8 (Not Include).

post-84551-0-65089100-1303816994_thumb.jpg

post-84551-0-47384900-1303817004_thumb.jpg

post-84551-0-43152200-1303817010_thumb.jpg

post-84551-0-93740600-1303817016_thumb.jpg

post-84551-0-90052600-1303817025_thumb.jpg

post-84551-0-01112700-1303817034_thumb.jpg

post-84551-0-04040700-1303817042_thumb.jpg

post-84551-0-24164000-1303817050_thumb.jpg

Edited by Codyxxx

for sale:

* spare wheel, space saver. $25

* 2x Q45 air flow metres, work fine, had cut the tops off and dodgy siliconed them up. cost me $150 for the pair, sell the pair for $50. need them gone.

* R32 gtst airbox, no filter, no snorkel. $50

* R32 gtst / stagea front brake rotors, stock, used. 280mm x28mm. $25 for the pair

For sale:

used Ohlin Coilovers to suit R32 GTR - may or may not need to be rebuilt as they're pretty stiff and rears made a knocking sound after I adjusted the height - no visible leaks, height and 32 step damper adjustable. $400

HEL stainless steel braided clutch line - brand new in it's packaging - $50

Brand new clutch fan and used but good condition fan blade to suit RB30 - $100

Used RB25 clutch fan blade - $50

Make: Nissan

Model: R33 GTS-T

Transmission: Manual

Colour: Black

Location: Adelaide

Currently registered? Yes

Price: $12,500

Contact: 0401 404 104

Comments / Modifications:

Currently making 252rwkw on 17psi this setup with forged built motor, aftermarket 550cc injectors and Z32 AFM is ready for any size turbo to make even more power. Blistein Suspension and Whiteline Swaybars provide great handling without the harshness of coilovers while the Viper 2 way paging alarm means its safe from evil eyes.

ENGINE

- Full engine rebuild with CP forged pistons + rings, fully balanced with all new bearings and gaskets.(Comes with $10,000 Worth of receipts for engine + clutch)

- Rebuilt head

- T3/T4 hi-flow turbo with VG30 exhaust housing

- Apexi Power FC

- Exedy Super Single Brass button Clutch

- Apexi Exhaust Valve Control

- Bosch 040 Fuel Pump

- Turbosmart boost controller

- Front Mount Intercooler

- Greddy Oil Catch Can

- Z32 Air Flow Meter (Capable of 400rwkw)

- 550cc Aftermarket Injectors (Currently running at 77% injector cycle)

- Nismo Fuel Pressure Regulator

- Stainless Steel Intake Pipe

- K&N pod filter

- 3.5" Exhaust by Exhaust Tech with hi-flow cat & Twin 3" Stainless Steel Pipes (with an Apexi ECV)

SUSPENSION

- TOP STOP Strut brace

- Rear Strut Brace

- Bilstein shocks with Whiteline Springs (Height Adjustable)

- Adjustable Whiteline Swaybars, Front and Rear

- Endless hicas lock bar (Engineered with paperwork from Doug Potts & and passed through Regency)

- Alloy Subframe Spacers

- Cusco Brake Stopper

- Replaced Diff with 4.11 Ratio

INTERIOR

- Garage 'S' Bucket seat (also includes standard seat)

- Genuine Bride Seat Rail

- Oil Temp, Blitz Gauge

- Oil Pressure, Blitz Gauge

- Boost pressure, Blitz Gauge

- Apexi Power FC hand controller

- Re-trimmed Leather Steering wheel, Perfect condition

- Nismo gear knob

- Genuine Skyline Floor Mats, Great Condition

- Silver Dash Surround

EXTERIOR

- S2 rear wing

- Standard S1 M Spec Front Bumper

- Jun rear bar ext

- DNA Wheels. 17x9 +30 all round

- GTR type grill

- nismo indicators

SPARE PARTS

- Spare Viper 2 way paging alarm remote

- Standard Suspension

- Standard Cat Back exhaust

- Standard S1 front bumper

- JUN front bumper

- JUN Sideskirts

- Standard Drivers Seat

copyofsdc11928.jpg

copyofsdc11924.jpg

copyofsdc11926.jpg

enginecut.jpg

Nikon D5000 dSLR with 18-55 lens + spare battery + 8GB Sandisk Extreme high speed memory card

Original box included- everything is in near new condition.

$550

Just put my DSLR up for sale, if yours is still here when mine sells ill take it :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Yeah, thumbsup from me. The distant shot of the bay just looks same-same as before.
    • Dad had a court case drag out with them from 1998 to 2004. He was in a not at fault accident, NRMA were the ones who covered the other person. They tried to blame his neck injuries on the fact he'd had an injury in 1981 on his extreme lower back where he slipped a single disc right near the bottom. Had been all cleared from that injury for years. This accident destroyed his shoulder, and f**ked a heap of discs in his neck, and he still has major problems with it to this day. Sarah's sister while on her L plates had a small Suzuki Alto, she had stopped to give way to an ambulance, and someone changed lanes behind her because there lane was also slowing, and rear ended her at 80km/h. (She had been stopped for a few seconds already too!). Car was completely f**kED. NRMA sent the vehicle around to 3 different workshops as they kept claiming "We believe it can be repaired, and not written off, we just need to find the correct workshop". It took 3 months, and a lot of arguing before they'd concede and wrote it and paid out. About two years later her sister had a Lancer, someone pulled out of a stop sign without stopping (in an 80 zone). Her sister swerved, hit the front of the other persons car (Instead of dead t-boning the drivers door), which ramped her Lancer, and made it roll multiple times down the road. It hit every panel on the way through. Her sister had slid her self out of the car, and remembers the ambos walking to the accident (They'd been sitting at a set of lights just down the road and witnessed it) and they were saying "Well, this ones going to be a fatality, no way you can walk away from that". Well, she did. And then NRMA sent two assessors out to look at the car, both of which wrote it off. They tried to send another assessor out, except a HUGE uproar was raised, and they FINALLY paid it out. That was on a car, that had damage to EVERY panel, you could see from 100m away the whole car was also twisted, roof bowed etc. Nah, we'll try get out of needing to payout on a $10,000 car... Her sister ended up with major shoulder reconstructive surgery being required, and was permanently limited in her ability to do her job as a nurse after that, as she can't (And was told before surgery too this would be guaranteed to happen) regain full strength in that shoulder. However, there was no choice to not have it, as she could barely use her arm, which was her dominant one, and was in near constant major pain. (And she's the type of person that would try and walk off a broken leg!) NRMA did the biggest run around on the personal injury side too for about 18 months, even to the point of trying to put 100% blame of the accident on Sarah's sister, even though the other driver admitted she didn't look, and didn't stop, and was charged by the police. Sarah used to have a Barina insured with them. It was a policy setup, paid all 12 months in advance. At the end of the 12 months, Sarah was living with me, I reviewed the renewal, it clearly stated "If you do nothing, your policy will cease on XYZ date". We did nothing, as we moved her insurance in with all of mine and I was with Shannons. We find out 10 months later, NRMA decided, because he DAD had a car insurance policy at the same address as what Sarah's mailing address was (Garaged address had been changed), that they'd put Sarah's (What should have been non existent policy) onto her Dad's month to month charges on his credit card. We had to jump through hoops, to get a refund. They didn't care that we actually found the letter that said "If you do nothing, your policy will cease" they made us prove we had NON COMPULSORY insurance else where before they'd issue the refund, and after they agreed to the refund, it still took another 6 weeks and 3 more phone calls for them to actually process it. They also had two insurance claims from storm damage, and they were an absolute cluster to get resolved as well (one vehicle, one house). Some how, up until about 3 years ago, her parents were still loyal to NRMA too, and we were like "How the hell are you so loyal to staying with them, when other places are so much cheaper, and they've f**ked you over every time you've ever had to make a claim?"
    • I got the four AN10 fitting welded up to the cam covers and started up making the head to sump breather/drain lines. The front passenger side cover I used a 45 up top and a 90 at the bottom into the stock VCT head drain spot (3/4" BPST to AN10 adapter) thats unused on the RB25DET NEO with some speedflow flame shield to protect it from the manifolds heat.   back passenger side was a 90 up top with some flame shield and 45 at the sump end. The rear drivers is 45 at both ends   the front drivers fitting is capped off for now but ready to go if i want to try moving the breathers around. I was told by the fabricator to leave all the welds raw for now to make sure there are no pin hole leaks. A lot of cleaning up, re bundling looms and degreasing to go as well as final assembly on the cam cover baffles. The first real test will be 28th March at a Circuit event. added complexity and more spots for leaks but overall looks relatively neat imo
    • Yeah i think the dash needs to come out. To get the loom or maybe just climate control and radio cluster. My mirrors are done i think the motors don’t work so well after flood haha i need the ac fan, you said you wanted to keep it for your 31 and interior loom not including boot. The wiper motor. I’m not sure how good the window surrounds are on the exterior on the pintara.  I will message you to get your bank details shortly 
    • Just another barrier put up to stop cars being modified. When we're all driving Chinese sewing machines, you won't want to modify it anyway, and you'll likely already have slashed your wrists and be locked up in a padded room for your own protection.
×
×
  • Create New...