Jump to content
SAU Community

For Sale Thread


Cubes

Recommended Posts

A few things i have for sale that are no longer needed.

Firstly is a Blitz active type clutch which is a twin plate clutch built by ORC for Blitz.

It can be used as a single or twin plate and is one of the only clutches to be able to do so.

I have had it in my car for the last three years and it has done under 5000km of City driving it has never been tracked.

I am asking $1200 firm as it cost me $3000 when i bought it.

It comes with clutch, bearing carrier, thrust bearing and flywheel bolts.

R34 GTT front and rear rotors with plenty of meat still on them - $200ono

Link to comment
Share on other sites

Diff 1:

R32/S13 type with ATS 2 way lsd and 4.08 ratio. absolutly mint condition in side and out. has 5 bolt half shaft ends. $750

Diff 2:

S14/r33 type with Tomei Trax 2 way LSD and 4.1. absolutly mint condition LSD was rebuilt with a new set of clutch disks 12 months ago and comes with yet another rebuild kit free with it. has one half shaft missing. hence the cheaper price. $600

located Adelaide SA. if interested please PM me or sms me 0412 938 933

Edited by Simon-S14
Link to comment
Share on other sites

Shift 2 for the Playstation 3 - $80 firm and I'll throw in Hot Pursuit FREE for the PS3 aswell! :thumbsup: both in AS NEW condition

5e4a99a78045.jpg?1291097226

jaquette-need-for-speed-hot-pursuit-playstation-3-ps3-cover-avant-g.jpg

Still for sale! Price firm. Pick it up now for entertainment over the epic long weekend coming up :thumbsup:

Link to comment
Share on other sites

for sale:

CST hyper zero 1.

4x 18x9.5 +15

4x federal 595ss (approx 80%)

wheels have minor marks on inside of wheel stud holes from fitment but nothing major..

only selling to make way for some 18x10.5

$2200 firm, otherwise i wont sell!

Link to comment
Share on other sites

Does anyone need a rear door drivers side glass window for an R33 4 door?

Didn't even know I had it still.

You can have it if you want it. Moving in a week, so get it quick before I smash it in the skip!

FFFRRREEEEEEEEEE!

Link to comment
Share on other sites

Gizzmo Dual Stage Shift Light - $100

post-3189-0-16674200-1302337958_thumb.jpg

R32GTR Rear Brakes $200 - Brake ducts / genuine nissan rotors / Endless Pads / braided lines / rebuilt calipers excellent condition

RB26 ACL Head Gasket - used but good condition and REUSABLE. $80

post-3189-0-99625000-1302338371_thumb.jpg

Free fitting for the shift light - this weekend only!

Link to comment
Share on other sites

I have an rb26 that would suit a rebuild, just seeing if anybody is intrested.

The engine is at my mechanics workshop and if somebody shows some intrest i can arrange photos or to come have a look.

it came out of a R32 GTR with a build date of 11/93 so it should have the long nose crank, it didnt spin a bearing it blew a turbo and now no3. or 4 cylinder is at about 50psi compresion and is scored relativly badly.

i dont have the turbos but have the rest, the block hasnt been opend up so dont know how it looks inside. it had 60k km on the engine when the turbo went.

$1800 for everything but can seperate if have enough intrest on most parts.

send me a pm or u can text me on 0403764628.

Thanks

Tim.

Link to comment
Share on other sites

FOR SALE

set of stock alloy r33 gtst rims and tyres 205/55s slight camber wear but have good treads all round 50% minimum

$200 ono

17inch multi spoke style rims with crappy tyres ( fun to finish off ) slight stud damage to one rim

would come up a treat if powder coated i got a quote from ollier powder coating for $200

$200 ono

text for pics 0413863525

Link to comment
Share on other sites

For Sale: R33 GTST 1995, 101,000kms, $ 13,000 (Nego)

Contact me/ sms: 0402935588

Exterior:

Front fiber glass bumper

Side Skirts

18 Inch Crome wheels, front: 235/40/18 , back: 255/40/18

Engine bay:

BMS racing pod filter

HKS BOV SSQV 3

Front Strut bar

ARC intercooler

NISMO cap

Walbro fuel pump installed

Complete car alarm system installed

Power 200kws at the wheels with 14 psi boost.

Exhaust:

3 inch front pipe

3 inch high flow cat Standless steel

3inch X-force muffler Standless steel

3 inch pipe from front to back with 5 inch drift cannon muffler on the back.

how does it sound ? perfectly awesome

Interior:

Solid Purple colour paint

Stock seats and looks like new , front and back

Drift digital boost gauge with drift black case

Greddy boost controller pro spec 2 , dual stage

Window tinting 20 percent / 35 percent , front and back

Steering wheel replaced 3 month ago with air bag type

momo racing gear knob

racing pedal

kenwood 700 w amplifiers support x4 speakers

Battery replaced with maintenance free type

NISMO Dashboard meter , show 300km/h

Plate: NISMO8 (Not Include).

post-84551-0-65089100-1303816994_thumb.jpg

post-84551-0-47384900-1303817004_thumb.jpg

post-84551-0-43152200-1303817010_thumb.jpg

post-84551-0-93740600-1303817016_thumb.jpg

post-84551-0-90052600-1303817025_thumb.jpg

post-84551-0-01112700-1303817034_thumb.jpg

post-84551-0-04040700-1303817042_thumb.jpg

post-84551-0-24164000-1303817050_thumb.jpg

Edited by Codyxxx
Link to comment
Share on other sites

for sale:

* spare wheel, space saver. $25

* 2x Q45 air flow metres, work fine, had cut the tops off and dodgy siliconed them up. cost me $150 for the pair, sell the pair for $50. need them gone.

* R32 gtst airbox, no filter, no snorkel. $50

* R32 gtst / stagea front brake rotors, stock, used. 280mm x28mm. $25 for the pair

Link to comment
Share on other sites

For sale:

used Ohlin Coilovers to suit R32 GTR - may or may not need to be rebuilt as they're pretty stiff and rears made a knocking sound after I adjusted the height - no visible leaks, height and 32 step damper adjustable. $400

HEL stainless steel braided clutch line - brand new in it's packaging - $50

Brand new clutch fan and used but good condition fan blade to suit RB30 - $100

Used RB25 clutch fan blade - $50

Link to comment
Share on other sites

Make: Nissan

Model: R33 GTS-T

Transmission: Manual

Colour: Black

Location: Adelaide

Currently registered? Yes

Price: $12,500

Contact: 0401 404 104

Comments / Modifications:

Currently making 252rwkw on 17psi this setup with forged built motor, aftermarket 550cc injectors and Z32 AFM is ready for any size turbo to make even more power. Blistein Suspension and Whiteline Swaybars provide great handling without the harshness of coilovers while the Viper 2 way paging alarm means its safe from evil eyes.

ENGINE

- Full engine rebuild with CP forged pistons + rings, fully balanced with all new bearings and gaskets.(Comes with $10,000 Worth of receipts for engine + clutch)

- Rebuilt head

- T3/T4 hi-flow turbo with VG30 exhaust housing

- Apexi Power FC

- Exedy Super Single Brass button Clutch

- Apexi Exhaust Valve Control

- Bosch 040 Fuel Pump

- Turbosmart boost controller

- Front Mount Intercooler

- Greddy Oil Catch Can

- Z32 Air Flow Meter (Capable of 400rwkw)

- 550cc Aftermarket Injectors (Currently running at 77% injector cycle)

- Nismo Fuel Pressure Regulator

- Stainless Steel Intake Pipe

- K&N pod filter

- 3.5" Exhaust by Exhaust Tech with hi-flow cat & Twin 3" Stainless Steel Pipes (with an Apexi ECV)

SUSPENSION

- TOP STOP Strut brace

- Rear Strut Brace

- Bilstein shocks with Whiteline Springs (Height Adjustable)

- Adjustable Whiteline Swaybars, Front and Rear

- Endless hicas lock bar (Engineered with paperwork from Doug Potts & and passed through Regency)

- Alloy Subframe Spacers

- Cusco Brake Stopper

- Replaced Diff with 4.11 Ratio

INTERIOR

- Garage 'S' Bucket seat (also includes standard seat)

- Genuine Bride Seat Rail

- Oil Temp, Blitz Gauge

- Oil Pressure, Blitz Gauge

- Boost pressure, Blitz Gauge

- Apexi Power FC hand controller

- Re-trimmed Leather Steering wheel, Perfect condition

- Nismo gear knob

- Genuine Skyline Floor Mats, Great Condition

- Silver Dash Surround

EXTERIOR

- S2 rear wing

- Standard S1 M Spec Front Bumper

- Jun rear bar ext

- DNA Wheels. 17x9 +30 all round

- GTR type grill

- nismo indicators

SPARE PARTS

- Spare Viper 2 way paging alarm remote

- Standard Suspension

- Standard Cat Back exhaust

- Standard S1 front bumper

- JUN front bumper

- JUN Sideskirts

- Standard Drivers Seat

copyofsdc11928.jpg

copyofsdc11924.jpg

copyofsdc11926.jpg

enginecut.jpg

Link to comment
Share on other sites

Nikon D5000 dSLR with 18-55 lens + spare battery + 8GB Sandisk Extreme high speed memory card

Original box included- everything is in near new condition.

$550

Link to comment
Share on other sites

Nikon D5000 dSLR with 18-55 lens + spare battery + 8GB Sandisk Extreme high speed memory card

Original box included- everything is in near new condition.

$550

Just put my DSLR up for sale, if yours is still here when mine sells ill take it :D

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • As far as I know, Infiniti stopped importing vehicles before 2020, even though they were still selling their stock for at least a year or 2 after that, they were older build years, therefore, you can import a 2020 400R, because you couldn't buy an AuDM 2020 built Q50 RS. As for insurance, you might need to go through one of the enthusiast insurance companies, they tend to insure a lot more grey import models than the mainstream insurers as Duncan mentioned.
    • loved seeing the zenvo on the a1 just after the hatfield tunnel i was the guy in the white van trying to egg you on it sounded awesome and those exhausts glowing red inside insane cheers for the thumbs up tim and tom.
    • So.... when I'm finally getting around to having my power steering leak sorted, now it looks like I've got the same issue most A/T Skylines are having. My A/T light will randomly come on and I'm stuck in 3rd gear until I turn the car off and on again. Only 3 weeks ago I did a complete transmission service: Oil flush + new gasket + new filter. This came out of nowhere!! It wasn't like the car was driven hard. I drove about 3 mins down the road to get fuel and boom!!!  Anyway, I have a few questions and hope you fine people can help me out here. All questions are in red. 1. The solenoids: I was looking at the parts catalogue in Amayama and I could only find the Solenoids as an assembly. https://www.amayama.com/en/part/nissan/319404ax05 I read in another thread that Solenoid A = 31940-4AX02 & Solenoid B = 31940-4AX05 but the Amayama product has only the code of B. Is this the right part? Can anyone who has done the Solenoid changes or seen them confirm if this is the complete set of A & B?   2. Gasket and Filter: I'm not going to try change the solenoids myself because it seems difficult to do in a home garage with just 2 jack stands. I plan to take it to a shop and get it changed. I was also going to buy the transmission sump gasket at the same time so I don't reuse the same gasket. Should I just use the existing gasket as it has only been on the car since OCT 19th? (~3 weeks) Should I be buying a brand-new gasket and a filter? Does this job involve taking the filter out?   Thanks in advance to everyone. It's hard to find a video of someone doing a solenoid change on a R34 so any help you can give answering my remaining questions would make me less stressed.
    • Yea - From what I have seen from the video, the car idles like any R34 lol 50PSI of fuel pressure is hardly super abnormal, the regulator is working because the pressure remains static when the throttle gets revved, i.e pressure remains the same when manifold vaccuum changes. Bigger pumps on stock rails always bumped the pressure in the rail without using an aftermarket regulator to change that. Do you know what your IAC is actually doing? Has there been any data showing the stepper motor % etc? There's no way your idle is actually moving around the way the cluster(s) are indicating. You would hear the difference with the engine RPM flying to 3k and 1k in mere seconds. I'd be checking the wiring to the tacho. What the tacho is telling you and what the engine/ecu is telling you are different things. I assume your ECU doesn't display the spike. So whatever is telling the tacho to be at X rpm is doing something weird. When the going gets insane, you're on the wrong path. You've ruled out plenty of things that are working correctly/aren't the issue. Your idle isn't doing what the tacho is indicating. You have two seperate issues, I don't think they are linked, and the idle seems reasonably okay unless it's stalling which.. well, it hasn't. Troubleshoot the stall if it occurs by figuring out what your IAC is doing vs what it is being told to do.
    • So awesome! I love the RB with the exhaust on display.
×
×
  • Create New...