Jump to content
SAU Community

Recommended Posts

For sale

Sa belt 4 point harness , black with shoulderpads

80$ono

Rb20 turbo no play. Can cometh dump/front/elbow .60$ono

R32 catback exhaust big hap system with cannon not too loud good street exhaust.150$ ono

Gutted 3" cat 30$

R32 back seats 80$

All boot trim and carpet make an offer

0435163144 plz text or call coz I don't check pm's

SHED CLEAN OUT

All items located in the eastern suburbs near Norwood

1. RB25DET coilpack/valley cover $30

2. RB25DET Standard front/dump pipe $30

3. S14/S15/R33/R34/Stagea Rear Camber arms with bushes $20

4. S14/S15/R33/R34/Stagea Rear Toe arms with bushes $20

5. Redline Shockproof Lightweight gearbox oil 2 x Quart bottles $20ea

6. OBD 2 Consult to serial cable w/ Belkin Serial to USB adaptor $80

7. Set of 4 tein coilover bump stops $10

8. RB25DET Side mount intercooler $20

PM ME

SHED CLEAN OUT

All items located in the eastern suburbs near Norwood

1. RB25DET coilpack/valley cover $30

2. RB25DET Standard front/dump pipe $30

3. S14/S15/R33/R34/Stagea Rear Camber arms with bushes $20

4. S14/S15/R33/R34/Stagea Rear Toe arms with bushes $20

5. Redline Shockproof Lightweight gearbox oil 2 x Quart bottles $20ea

6. OBD 2 Consult to serial cable w/ Belkin Serial to USB adaptor $80

7. Set of 4 tein coilover bump stops $10

8. RB25DET Side mount intercooler $20

PM ME

redline oil is in the bin thanks to my old man.... :/

R33 GTST MANUAL ACCELERATOR/BRAKE/CLUTCH PEDAL SET SOLD PENDING PAYMENT

RB25det sump $30

R33 sr2 wing needs paint $30

R33 gtst sr1 front wiper motor $30

R33 gtst sr1 rear wiper motor $35

R33 gtst sr1 bonnet hinge set $15

R33 RB25 skyline power steering reservoir with lines $20

RB25det sr1 stock injectors all work fine but some have broken plasic ends but can replaced $20

RB25det sr1 aac valve $40

fiberglass vent (uncut vent) $50

R33 gtst sr1 abs unit and bracket $60

Rb25det sr1 flywheel $40

R33 gtst coupe sr1 door handle's $30

R31 sr3 grill $10

R31 sr3 bits lot $15

R33 rb25 engine mount brackets(mounts are rooted as seen in pic)$25

R33 gtst light garnish $30

R33 centre interior light plus other? $25

R33 turbo oil drain pipe $10

rb25det sr1 crankshaft(pulled from running engine with 80k and only 10psi stock turbo) $70

r33 horns $10

Nismo muffler 2.75mm inlet with 4.5inch tip $100 plus rear section that suits r33 free with muffler

RB hard oil turbo line $25 (not sure if its rb20 or rb25)

RB hard water turbo line 1 $25 rb20 rb25?

RB turbo hard water line 2 $25 rb20 rb25?

R33 gtst window wiper set $ 15

R33 gtst sr1 passenger side electric window switch and loom $45

R33 gtst sr1 2door seat belts(not sure if its complete) $50

R33 gtst sr1 air con units that sit behind the dash $90

RB20 RB25 Coil Pack Mounting Brackets(might be some bolts missing) $20

pioneer reverse camera bought it 2 years ago for $100 from jb hifi but never used it. $25

vr v6 commodore sedan fuel sender and pump(pulled from running) $40

r33 boot latch with plug $20

R33 boot and fuel lever $15

R31 1989 oz spec bonnet latch and lever $15

R33 a/c receiver,drier sensor $30

rb25det fuel modulator with bracket$25

R33 gtst R/H drivers door glass $40

R33 gtst L/H drivers door glass $40

R33 rear window $70

R33 gtst front fenders rolled and liped $170 for both

R33 stereo brackets $20

R33 sr1 dash trim(needs a clean and paint) $40

R31 sr3 4door window wiper and headlight indicator switch stalk(in good working condition) $25

r33 sr1 bonnet in primer$100 has a small dent(can send pics)

R31 oz spec sr3 89 dash painted in black with the correct die paint and half day preping the dash(hard to scratch but if you do, the die paint can be touched up with out a trace. The dash pad is still in stock brown but in good condition. what you see in the pics is what you get. Only selling as im going custom dash for track car. Items are a bit dusty as they have been sitting in my shed $50

R33 gtst false rear wall $20

R33 gtst sr1 coupe rear quarter trims LEFT & RIGHT they just need a clean but in good con $50

RB25det stock dump on black vht $20

R33 gtst rear bar with gtr pods both will need repair $50

r33 gtst sr1 power window motor regulator LHS $80

r33 gtst sr1 power window motor regulator RHS $80

R33 gtst rb25det hicas computer $60

ARP RB20 RB25 HEAD STUDS BOLTS KIT NEW NEVER USED $150(was going to build a forged rb25 for my 31 but now need money for another project)

ARP rb25 Exhaust Manifold Kit new never used $100

R33 bonnet in black primer has a small bend in lip $50( can get pic)

R31 1989 sr3 front calipers( pulled from running car but have been sitting for 3 years) $30

I have r33 interiour parts, pm for what you after

pm me or sms 0435 888 239

Will post at buyers expense

dave

r33 s2 complete doors - white

r33 gtr front grill brand new never used

nismo steering wheel with boss kit

veilside bodykit to suite r33 s1

4inch cat back exhaust with 5 inch cannon (exhaust is cut in half) has no muffler or resinator straight piping sounded insane

offers for anything pm me

r33 s2 complete doors - white

r33 gtr front grill brand new never used

nismo steering wheel with boss kit

veilside bodykit to suite r33 s1

4inch cat back exhaust with 5 inch cannon (exhaust is cut in half) has no muffler or resinator straight piping sounded insane

offers for anything pm me

can you please add a price that you hope to get for these parts

Thanks

sorry, dont even know really

grill - 160 or so

doors 125 each or 200 for both

cat back exhaust 100

steering wheel 75 or something

bodykit 150

dohmar ill send u a pic tonight when im home from work, if u wanna pm me your mobile number i can probably send you one during the day.

cheers

items FOR SALE:

  • Twin tip straight pipes made from high grade stainless steel $150 firm designed to be flanged under the sub frame/ diff originally came from exhaust technology. very good quality pipes. suits R32.May suit other Nissan models.
  • Standard r32 GTS-T series 2 steering wheel (rare with leather horn button not plastic black one) mint condition no rips or tears,stitching is perfect $150 firm best you will find pics on request.
  • Standard r32 RB20DET injectors x 6 $100 firm come complete with o rings and seals, came off my 20 for GTR injector upgrade last kms was about 115,000. Good condition no leaks.
  • Midnight blue R32 GTR front bar (not N1) genuine plastic with genuine un cut GTR reinforcement, factory mesh and number plate bracket and custom made tow strap fits between lip and bar $600 firm will not split. sold as a package.
  • Original side repeaters mint condition on fascia sides x 2 one has broken top clip supplied needs plastic welding $100 for both or $50 each. Not supplied with globes and holders.Suits replacement.
  • Genuine din pocket with spring loaded front cover flap fits in center of dash near climate control and cd player. suits r32 skyline $30 mint condition

cheers guys please call me or text me on 0421675373 if there are any questions or interest. Im not on here alot anymore :(

regards BEN.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Reasonably hard, although I haven't run it with the new Endless setup yet. The old brakes were F50's on 335mm rotors and the car did a 1:40.6 at Phillip Island which is a reasonable time, I'm seeing high 600s on the temperature paint. A guy I know ran the Endless fluid at WTAC without issues and he was doing 1:33's I think (Evo) with a 355/332 setup. I don't get out to the track as much as I'd like but we put the car on the hoist and spanner check every bolt and re-paint mark everything, bleed the brakes, change the fuel, check the coolant system and re-bleed blah blah blah before every event. Motorsport is expensive, RB's are expensive so a couple of hours before an event is time well spent. It's also a net time saving because if you can keep your RB from self destructing it saves you time in the long term!
    • Welcome Alice......hope you have a bit more luck from here on! What was done in the build?  
    • Hello! I'm new here, I have an R33 GTST that is currently being finished up! Last year was pretty rough, blew two stock turbos so I decided to build the car. Has been down since November, but I get it back next weekend!
    • Hello, I believe my car was imported to America in the 2000s by Kaizo Industries. Would anyone be able to help me find more info on them? I've only found all the basic stuff like that paul walker bnr34, them being shutdown by feds, just stuff like that. Any help would be much appreciated, thanks!
    • I am using Motec M150.  I am not working on the car myself actually.  My workshop is giving all these info, they are quite reputable in the industry and are very familiar with Motec and RBs and have done a few big setups with VCam and single turbo on RBs.  In fact, they built and tuned my engine from day one.  But they are stumped with my engine at the moment and cannot work out how come the compression is so low with the VCam. They told me that they have now swapped in some Kelford cams (without the VCam) and can achieve around 130psi compression and the low end torque is better, but now the engine is doughy as.  It boosts and peaks at more than 1000rpm slower, with twin HKS GTIII RS, it doesn't get full boost until over 5000rpm. I have always thought the VCam was a bit disappointing at the low rpm. To a point I had to ride the clutch a fair bit to get up a small hill from stand still.  That was when I had a clutch.  Now changing to a 8HP, I don't have that luxury and this problem has become a major issue. I am beginning to think the VCam never work since the day it was installed.  Maybe it was just sitting at the most advanced point, that is why it went good at top end but very ordinary at the bottom.  Therefore, with the help of the Holinger 6 speed and paddle shift, as long as it was moving, it drove pretty good.
×
×
  • Create New...