Jump to content
SAU Community

For Sale Thread


Cubes

Recommended Posts

S2 rb25 splitfires with loom - $400

Gtr front guards - $350pair

Eboost with solenoid and wiring - $300

R34gtt brakes with dba4000 slotted rotors and qfm pads (500kms old the lot) - $600

BRAND NEW BC BR coilovers - $1000

fuel setup - $350

external pump 044, surge tank 1.5L, magnaflow fuel filter, speedflow fittings for pump surgetank and filter

Link to comment
Share on other sites

fs r33 drift car

Hdi intercooler kit

new tie rods and ends

lengthend lcas

Stock suspension rolling on stockies or 17x8.5 and 17x9s depending on price

genuine 65 thousand ks

paint work is mint except front guards goes killa for stocker had it on 10 pound goes killa

also comes with boost controller and guage

5k ono

post-77561-0-87826200-1328430855_thumb.jpg

Edited by Ke55pig
Link to comment
Share on other sites

ac compressor for a series 2 r33 skyline (unknown kms but is in good condition - nothing is seized)

intention was to use it to fix mine but series 1 and 2 compressors are different,

will do a straight swap for a working series 1 compressor or 75$ ono.

*please note the item is still on the vehicle and will be off next weekend.

Link to comment
Share on other sites

hey guys, selling my 32 gts converted to gts-t. engine conversion has all paperwork for it, bigger brakes, the new engine is about to click over to 103,000 k's, no oil leaks as just had all seals replaced, 100k service was done not long ago, rear lock bar with engineers report, full stainless straight pipes with highflow cat, 17x8 (i think) drift teks, ISC coilovers all round, brake booster, HKS turbo timer, GREDDY strut braces front and rear. am looking around $12,000 ono, pm me or text or call me on 0433 441 808 and i can send through pics

cheers Sam

need this gone asap, comes with stock r32 wheels with brand new tyres and complete stock suspension. willing to trade for a single cab hilux if in good condition. $12,000 ONO

Link to comment
Share on other sites

Rb25 neo turbo so the op6 housing 110xxx very good condition $250 (did have a guy intresred in this but accidently cleared pms out of my messenger.

550cc rb25det non neo highflow injectors $400 ono

S1 stagea auto trans with mv autos shift kit $450ono

r33 front cross member $50

S13 /180 diff r200 complete disc to disc $250

Link to comment
Share on other sites

Selling R32 GTR Front Seats, Excellent Condition, No rips or tears.

P2060113.jpg

$550 o.n.o

and set of Chrome Rims with decent amount of Dish, Unsure of Brand or dimensions, but 17", 9.5" rears and 8.5" Fronts.

235's on the fronts and brand new 235's on rears.

P2060118.jpg

P2060119.jpg

P2060120.jpg

one of the Valve leaks,

$575 o.n.o

need these gone as i have moved house and taking up to much space,

Contact me on 0452 258 288 as i don't get on here a lot Cheers

Link to comment
Share on other sites

Items:

Greddy Type Rs Blowoff Valve Adapter Kit Suite Rb20det engine

Item Condition:

New Was On Car for 3 weeks only

Extra Info:

Real Greddy Product. comes with box all parts and instructions.

Contact Details:

contact me questions by email

Price and price conditions:

paid $400 new so looking for $300

Link to comment
Share on other sites

Items:

Greddy Type Rs Blowoff Valve Adapter Kit Suite Rb20det engine

Item Condition:

New Was On Car for 3 weeks only

Extra Info:

Real Greddy Product. comes with box all parts and instructions.

Contact Details:

contact me questions by email

Price and price conditions:

paid $400 new so looking for $300

Link to comment
Share on other sites

Items:

Greddy Type Rs Blowoff Valve Adapter Kit Suite Rb20det engine

Item Condition:

New Was On Car for 3 weeks only

Extra Info:

Real Greddy Product. comes with box all parts and instructions.

Contact Details:

contact me questions by email

Price and price conditions:

paid $400 new so looking for $300

Link to comment
Share on other sites

Items:

Greddy Type Rs Blowoff Valve Adapter Kit Suite Rb20det engine

Item Condition:

New Was On Car for 3 weeks only

Extra Info:

Real Greddy Product. comes with box all parts and instructions.

Contact Details:

contact me questions by email

Price and price conditions:

paid $400 new so looking for $300

post-68126-0-54948600-1328673870_thumb.jpg

post-68126-0-53440700-1328673910_thumb.jpg

Link to comment
Share on other sites

post-45384-0-97546700-1328697168_thumb.jpgpost-45384-0-67201500-1328697249_thumb.jpgFor sale.

1998 R34 GT-T.

Turbo, Manual.

Never had a problem with the engine. Very reliable.

Just over 100K on the clock.

Due for service, Will sell for $15,800 serviced, or $15,200 no service.

Brand new tyres on the rear, and near new up front., (Putting brand new on this week)

17-8 Front, 17-9 Rear.

Jap brand wheels.

Blitz cooler,

Apexi Power FC,

elec boost,

Oil cooler,

HKS pod,

etc.

Legal height, (Just)

No rush to sell. The only reason I'm selling is because I need/want a 4x4, for fishing and carrying on.

The 34 just isn't for me anymore.

(Doesn't come with the plates)

PM please.

Link to comment
Share on other sites

R33 GTST Series 2 front bumper - silver in colour - $SOLD

R32 GTR standard ECU without covers - but I'll provide Apexi PFC covers you can make it fit onto it - $50

generic CANNON MUFFLER - $30

standard cat - $30

standard R32 GTST steering wheel with horn button - $30

standard R32 GTR radiator - have 2 - $SOLD each

R32 GTR front swaybar - $30

R32 GTST rear swaybar - $10

R32 GTR standard lower intercooler hoses - $30

yellow spacesaver spare wheel - $30

standard spacers and used speakers to suit rear of R32 - $30

custom made spacers + new sony speakers to suit front of R32 - $50

R33 GTR standard dump pipes - good upgrade for an R32 GTR - $50

RB26DETT clutch fan blade - $50

R32 RB20DET speedo cable brand new never used - $50

R32 GTR RB26DETT HEL braided clutch line, brand new never fitted, purchased from the group buy on SAU - $30

FREE: full set of RB25DET Series 2 coilpacks - used, been siliconed up, go through em and see which ones usable if you want working spares

FREE: various R32 interior and boot trim

FREE: flat rear spoiler

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • People still have Skylines? I thought they're non-existent now. 
    • Harness update time have had great fun and learnt so much already so far with this project. I started off making both the ignition and injector sub harnesses in the hope any mistakes i made here aren't as hard to undo and learn from as the main harness.  A cool comparison of the old harness using presumably TXL wire and the new which is using Tezel. Also opted to use DTM plugs to keep the whole setup as neat and tidy as possible and tucked the wiring under the coil bracket to try and keep it all from sticking out too much. Although the injector harness, I'm not overly happy with as I'm still using the rubber boots that are supplied with the type of plugs it just looks ugly and sticks out like a sore thumb with the white identifiers so a slight redesign may be done.   Then it was main harness time and most importantly trying to route it nice and away from the heat it will use the OEM heater hose routing which is no longer present to keep the harness up high and secure. it's amazing how much smaller this harness is able to be compared to the old one. plugged everything into the emtron and with the help of the tuner again attempted to start it up and instantly fired up and running smoothly on all 6 which was a big shock to myself. So still some routing and adjusting to be done for the final fit up and installing a knock sensor harness plug which is in the post all has gone surprisingly well.     The old harness for shits and giggles.
    • They do that at random every now and then, with almost no detectable cause. Mine has done it a couple of times (over 25 years!!). Never worked out why.
    • I don't post on here and have been lurking for some time now. Many of the topics have helped me out more times than i can count. I was racing yesterday (11/9) and blew a front right CV shaft. I have spares so I popped a new one in. A thread i read previously said to check the engine mounts if you blow a front CV. Upon inspection, the front right mount was completely separated from the upper plate. This discovery saved me time and money, because i would have blown another CV if i went back out. Just wanted to thank you guys and wish everyone luck with with their builds. (Now if we could only come up with a solution for my power steering belt flying off after hitting the rev limiter, lol)
    • Either way he still need those style of spacer to go into the manifold because the photo he currently has is not going to work 
×
×
  • Create New...