Jump to content
SAU Community

For Sale Thread


Cubes

Recommended Posts

Items for sale, out of the car and ready! Some pictures at the bottom.

R33 s1 RB25 motor, comp test: 145 150 150 145 155 150 comes with computer loom and aftermarket coilpacks, no manifolds, very healthy motor - $1500 make an offer

R33 s2 manual gearbox 85,000km old, smooth, can do as a manual conversion kit $1800 (everything you need but no clutch) or alone $1500

ORC (Ogura Racing Clutch) 409 series single plate, couple track days old however Ive never driven on it so I dont know condition, un-sprung center and stock pedal feel - $400 (what it owes me)

R33 9 point Cusco D1 cage, side intrusion bars, through dash, all plates and bolts included - $950

AM performance R33 - GTS/GTST/GTR exhaust, comes with de-cat, split 2.5" system in to in built resonators and 4" twin pipes out with titanium tips - $1000

R32 GTR Intercooler - $150

400r R33 side skirts - $120

400r R33 rear bar, been cut out for larger exhaust but can be re-fiber glassed or exhaust shield made to cover (hence price) - $120

R33 genuine plastic front bar, damaged, no cracks in plastic good for drift - $120

R33 genuine front indicator covers and indicators - $80

th_IMAG0581.jpg th_IMAG0583.jpg th_IMAG0582.jpg

th_IMAG0584.jpg th_IMAG0585.jpg th_IMAG0580.jpg

th_DSC02019.jpg

Link to comment
Share on other sites

R33/34 GTR Auto Select Tower Bar

As Topic States:

I have an Auto Select Raised SPL Type Tower Brace to Suit R33 & R34 GTR (Not R32!)

(pretty sure it suits all r33/34 variant as the strut towers are the same...)

Trial fits welcome...

This Auto Select Skyline GT-R strut tower brace is pure porn, its a wide, thick and strong item that substantially increases stability between the upper suspension mounts. This has the effect of keeping alignment setting stable as the body cannot flex under stresses of cornering.

Drivers of cars fitted with these items immediately notice more responsive handling and more direct steering. They also can remove some rattles and squeaks from older vehicles by increasing chassis rigidity.

This Auto Select brace is machined from high grade T6 Aluminium in a single piece for ultimate strength. Light weight is maintained by removing excess aluminium and this also gives a benefit of an improved look with the AS logo machined into the face of the bar. It is now lighter and stronger than before.*

Other company’s bars and braces are of no comparison. This one is the best available.

The Auto Select Bar wraps around the strut towers for extra support. Thats why the Nagisa Auto R34 Demo car also uses this Auto Select Bar.

Selling as i would like to purchase an R32 GTR Item new as these are very rarely offered secondhand.

Price: $725 Pick Up. $750 Delivered

(Over $1100 outlayed for this originally & will again to get one to suit my R32 GTR).

(Check Below Site for New Price)

http://www.neweraparts.com/Default.aspx?tabid=54&List=0&ProductID=892

Actual Pics (On my R32 GTR to show why i cant reuse this item).

6a1c3eba.jpg

29623537.jpg

In case anyone think you can just reverse it 180degree amd make it fit...

Nope...It Doesnt work!!!

The angle of the Coilover Mounts are out by about 35ish degrees...

Moreso than that, the brace mounts are moulded around (actually wrap around) the top of the strut towers...

Below is a pic of the Centre Bar & the 2 different types of mounts, R33/R34 (Left) & R32 (Right).

(shows difference in angle & tower mould...

tb3.jpg

Underside shot showing tower moulding...

f5ef2e20.jpg

Motivational pics:

as.jpg

2f81f05f.jpg

28bd19f9.jpg

Contact: PM

Edited by krayzie32
Link to comment
Share on other sites

17x8 Drift R's for sale.

Good condition

Good tyres, only fitted a few months ago, 2x sumitomo zII & 1x Maxxis MA-V1 & 1 random due to puncture in other maxxis

Some gutter rash but overall good condition

After $500.

Link to comment
Share on other sites

FOR SALE

custom lobster back rb26 twin turbo pipes

lightly polished aliminium 60mm pipe

increases torque and response, reduces back pressure in in the cooler pipes

made to fit 34 gtr but should fit any rb26

pipes are as is, dont come with silicone joiners

after $400, will fit them at no cost but need joiners

post-9995-0-97881100-1333146607_thumb.jpgpost-9995-0-04491200-1333146800_thumb.jpgpost-9995-0-61878300-1333146816_thumb.jpg

Link to comment
Share on other sites

R33 s2 headlights excellent condition all brackets no fade etc - $350

33 s2 1997 gtst rear cradle with diff, complete rear hubs n brakes and manual tailshaft - $350

s2 KR4 both Doors with full trim/glass/mirros but missing power window switch - excellent condition, also kr4 boot with s2 spoiler - $500 the lot will throw in some freebies.

Also have a complete s1 gtst head with most boltons still attached.

Edited by KISIN
Link to comment
Share on other sites

Update:

R33 s1 RB25 motor, comp test: 145 150 150 145 155 150 comes with std. computer and aftermarket coilpacks, no manifolds or loom, very healthy motor - $1500 $1300

R33 s2 manual gearbox 85,000km old, smooth, can do as a manual conversion kit $1800 (everything you need but no clutch) or alone $1500

ORC (Ogura Racing Clutch) 409 series single plate, couple track days old however Ive never driven on it so I dont know condition, un-sprung center and stock pedal feel - $400 (what it owes me)

R33 9 point Cusco D1 cage, side intrusion bars, through dash, all plates and bolts included - $950 sold

AM performance R33 - GTS/GTST/GTR exhaust, comes with de-cat, split 2.5" system in to in built resonators and 4" twin pipes out with titanium tips - $1000 $950

R32 GTR Intercooler - $150

400r R33 side skirts - $120

400r R33 rear bar, been cut out for larger exhaust but can be re-fiber glassed or exhaust shield made to cover (hence price) - $120

R33 gtr genuine plastic front bar, damaged, no cracks in plastic good for drift - $120 on hold

R33 gtr genuine front indicator covers and indicators - $80 on hold

th_IMAG0581.jpg th_IMAG0583.jpg th_IMAG0582.jpg

th_IMAG0584.jpg th_IMAG0585.jpg th_IMAG0580.jpg

th_DSC02019.jpg

Link to comment
Share on other sites

R34 GTT front brakes.

dba4000 slotted rotors (1000kms)

a1rm pads (1000kms)

calipers

AWSOME upgrade for r32/etc

$600

viper 5901 alarm

brand new in box

$400

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...