Jump to content
SAU Community

Recommended Posts

moving house so keen on getting rid of all this stuff

not asking for big bucks just want em gone

mainly just want a few $ for the catch can as it cost me like 80 or 90 bucks i think

catch can - 50

can put a filter on top, or do whatever with it

other stuff

boss kit dont know if universal or whatever, fit my 33 with a nismo wheel

rb25 valley cover

4 floor mats, i think two are from a gtr and two are from a gtst

all the air con stuff from a 32 gtst

carbon canister and the lines

rb20 cam covers (no timing belt cover or valley)

rb20 clutch fan

r32 gtr weathershields id assume fit gtsts

r33 gtst door cards i think when i last looked in decent condition

R33 door used to be white needs to be sprayed but still got stuff inside it like glass etc... think it has the mirror in white too

most things can go for free just ask

pics if wanted PM me

heres a couple

post-86412-0-08912900-1343123762_thumb.jpgpost-86412-0-46429700-1343123766_thumb.jpg

For sale rx4 4 door/ 929 coupe package deal

$8500 ono

1974 rx4 4door flat nose model

The good.

Mark mills built 13bt mild port

s6 rotors 2mm scr seals

s5 turbo

microtech lt 10

Bosch coil pack

3"dump ,exhaust hooker muffler

PWR radiator

PWR intercooler

spl thermo

s4 gear box /rx4 bell housing H/D organic clutch

bosch 044 carter pre pump and surge tank

also comes with 700cc sard injectors not in car

16" wantabee rims

car made around 185rwkw on 6-8 psi engine has done less than 10000 since rebuilt and never boosted

the bad the body is rusty and but still registred and defect free

Thegood complete 929 coupe rolling shell just minus engine has rx4 flat nose front end conversion in primer very straight both cars as i bought them very sad to see them go but baby n.o. 3 on the way not much time for so many projects.

So some of them have to go i suppose.pls pm can txt pics

bump

For sale D1 Drift seats brand new, only 2 days old.

Was going to put them in my 34 GTT but can find seat rails to match

and not paying 500 big ones for custom ones, (thats each).

$500 for both, they are black and grey in colour,

They came will universal rails so come take them as well.

PM me if you are keen

Need them gone asap so i can get newish standard ones

Pics if you need them.

19x8.5" +35 speedy cheetah

5x114.3 suit ford/nissan/toyota.

Bought for my BA XR6T but have decided to put money to new FMIC & Tune rather than looks.

Good condition, some gutter rash but only 1-2cm marks Selling as bought, boxed and ready to go

$690ono

9637mg9_20.jpeg

9067cn9_20.jpeg

1744b63_20.jpeg

3636k52_20.jpeg

580859i_20.jpeg

Need this stuff gone! make an offer on anything.

Stainless steel top mount manifold suit rb20/25

MTX jackhammer 12" 250wrms in ported box

kicker 400wrms mono block amp

standard rb25 turbo

50mm external wastegate (4 bolt flange)

intercooler piping suit rb25 with standard position turbo and crossover

2x 14" steelies with good tread suit honda

dell 24" full HD pc monitor, hdmi etc.

PM if you're interested :) cheers

moving house so keen on getting rid of all this stuff

not asking for big bucks just want em gone

mainly just want a few $ for the catch can as it cost me like 80 or 90 bucks i think

catch can - 50

can put a filter on top, or do whatever with it

other stuff

boss kit dont know if universal or whatever, fit my 33 with a nismo wheel

rb25 valley cover

4 floor mats, i think two are from a gtr and two are from a gtst

all the air con stuff from a 32 gtst

carbon canister and the lines

rb20 cam covers (no timing belt cover or valley)

rb20 clutch fan

r32 gtr weathershields id assume fit gtsts

r33 gtst door cards i think when i last looked in decent condition

R33 door used to be white needs to be sprayed but still got stuff inside it like glass etc... think it has the mirror in white too

most things can go for free just ask

pics if wanted PM me

heres a couple

post-86412-0-08912900-1343123762_thumb.jpgpost-86412-0-46429700-1343123766_thumb.jpg

Carbon canister?

moving house so keen on getting rid of all this stuff

not asking for big bucks just want em gone

mainly just want a few $ for the catch can as it cost me like 80 or 90 bucks i think

catch can - 50

can put a filter on top, or do whatever with it

other stuff

boss kit dont know if universal or whatever, fit my 33 with a nismo wheel

rb25 valley cover

4 floor mats, i think two are from a gtr and two are from a gtst

all the air con stuff from a 32 gtst

carbon canister and the lines

rb20 cam covers (no timing belt cover or valley)

rb20 clutch fan

r32 gtr weathershields id assume fit gtsts

r33 gtst door cards i think when i last looked in decent condition

R33 door used to be white needs to be sprayed but still got stuff inside it like glass etc... think it has the mirror in white too

most things can go for free just ask

pics if wanted PM me

heres a couple

post-86412-0-08912900-1343123762_thumb.jpgpost-86412-0-46429700-1343123766_thumb.jpg

How'd they look on the GTR when you had it?

Stainless steel top mount manifold suit rb20/25 with 2 bolt 38mm wastegate flange (BRAND NEW) $200

Stainless steel top mount manifold suit rb20/25 with 4 bolt 50mm wastegate flange (USED) $300

MTX jackhammer 12" 250wrms in ported box $100

kicker 400wrms mono block amp $100

standard rb25 turbo $125

standard S1 RB25DET coil-packs $30

50mm external wastegate (4 bolt flange) $40

intercooler piping suit rb25 with standard position turbo and crossover $50

2x 14" 4x100 steelies with good tread suit honda $30

Open to offers guys, need this stuff gone. All in good working order.

Pics on request.

PM if you're interested or txt me on 0425366582 :) cheers

moving house so keen on getting rid of all this stuff

not asking for big bucks just want em gone

mainly just want a few $ for the catch can as it cost me like 80 or 90 bucks i think

catch can - 50

can put a filter on top, or do whatever with it

other stuff

boss kit dont know if universal or whatever, fit my 33 with a nismo wheel

rb25 valley cover

4 floor mats, i think two are from a gtr and two are from a gtst

all the air con stuff from a 32 gtst

carbon canister and the lines

rb20 cam covers (no timing belt cover or valley)

rb20 clutch fan

r32 gtr weathershields id assume fit gtsts

r33 gtst door cards i think when i last looked in decent condition

R33 door used to be white needs to be sprayed but still got stuff inside it like glass etc... think it has the mirror in white too

most things can go for free just ask

pics if wanted PM me

heres a couple

post-86412-0-08912900-1343123762_thumb.jpgpost-86412-0-46429700-1343123766_thumb.jpg

Real Garrett GT3071R, good condition, next to no shaft play. Rear blades are mint, front blades have some very small chips in a couple of blades but doesn't affect the performance of it. Came with a car I bought but doesn't suit my needs. Already off and ready to go, can throw in a stangard manifold with a spacer welded to it to suit the turbo but will need something sorted out to run an ex gate.

Garrett GT3071R CHRA

(Product Code: 700177-5023)

Description:

Turbo Charger model

GT3071R

CHRA

700177-5023

Compressor Wheel Inducer Size (mm)

53.13

Compressor Wheel Trim

56

Turbine Wheel Exducer Size (mm)

54.98

Turbine wheel Trim

84

$850 ono

May swap for R32 suspension parts (except coiloves), oil cooler set up, or just something of interest.

IMG_20120718_112126-1.jpg

IMG_20120718_112051-1.jpg

IMG_20120718_112152.jpg

Edited by Import S13

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Major thread necro but how bad of a job is it to DIY? Looking at it online it looks like if you reuse your ring and pinion as long as those are in good condition it should be fine to just pull the axles/front cover and replace the diff that way? Or should I be replacing everything and doing preload measurements/gear mesh testing like the factory service manual mentions for the rear diff?
    • in my list I had the R33 GTR as the best Skyline. Infact I had all GTR's (33>34=32), the NSX, the GTO, the 300ZX, the 180SX, the S15 better than the FD RX7. I had the MR2 and the A80 as 'just' better. I also think the DC5R Integra looks better but this is an 01 onwards car. I also think the FC>FD. It's almost like aesthetics are individual! The elements @GTSBoy likes about the FD and dislikes about the 180 are inverse in my eyes. I hate the rear end of the FD and it's weird tail lights that are bulbous and remind me of early hyundai excels. They are not striking, nor iconic, nor retro cool. The GTO has supercar proportions. I maintain these look much better in person (like the NSX) especially with nice wheels and suspension which is mandatory for all cars pretty much. Some (or all) of these you have to see in person to appreciate. You can't write a car off until you see one in the flesh IMO. Like most people we probably just like/dislike cars which represent certain eras of design or design styles in general. I also think the 60's Jag E type looks HORRIBLE, literally disgusting, and the 2000GT is nothing to write home about. FWIW I don't think the Dodge Viper Gen1's have aged very well either. You can probably see where I rate bubbly coupes like the FD. I know we're straying now but the C4 and C5 absolutely murder the Viper in the looks department as time goes on, for my eyes. Wouldn't surprise me if people who love the FD, also love the MX5, Dodge Viper, Jag E Type, etc etc.
    • I used to hate R31s, and any of the other Nissans that led up to it, and any of the Toyotas with similar styling, because of the boxiness. They were, and remain, childish, simplistic, and generally awful. I appreciate R31s a lot more now, but only the JDM 2 door. The ADM 4 door (and any other 4 door, even if they are unique compared to our local one) can eat a bowl of dicks. The Aussie R31 is also forever tarnished by their association with stereotypical bong clutching Aussie R31 owners of the 90s and early 2000s. I think the Nissans of the 70s (other than 120Y/180B/200B) are far superior looking to the 80s cars. The 240K era Skylines are boss. The same is broadly true of Toyotas. Hondas don't ever register in my thinking, from any era. Mitsus are all horrid shitboxen in any era, and so also don't register. Subarus are always awful, ditto. Daihatsus and Suzukis also don't generally register. They are all invisible. I think the SW20 MR2 looks fiddly. The 3000GT/GTO is like that but way worse. Too many silly plastic barnacles and fiddly gimmicks ruined what could have been a really nice base shape. Kinda-sorta looks like a big heavy ST165 Celica coupe (and I'm not sure if that's a good thing or a bad thing). I think the 180SX is dreadfully bland. It's not bad looking. But it has no excitement to it at all. It's just a liftback coupe thing with no interest in its lines, and bad graphical elements (ie wide expanses of taillight plastic on the rear garnish). The S13 Silvia is a little better - getting closer to R32 shapes. But still....bland. S14? Nope. Don't love it. S15...a little better. Probably a lot better, actually. Benefits from not being like a shrunk in the wash R34 (where the S13 was a shrunk in the wash R32 and the S14 looked like a Pulsar or something else from the stable on Nissan mid 90s horrors). The Z32 was hot as f**k when it came out but hasn't aged as well as the A80. Keep in mind that I think the R33 is the most disgusting looking thing - and out of all the previous cars mentioned is objectively closest to my precious R32. It's just....real bad, almost everywhere you look. And that is down to the majority of what was designed in the 90s being shit. All Nissans from that era look like shit. Most other brands ditto. In that context, the FD absolutely stands out as being by far the best looking car, for reasons already discussed. Going behind the aesthetics, the suspension alone makes it better than almost any other car.  
    • If they just called it the "Mazda Tiffany", it would have been spot on.
    • Yup but for me its the HR ! Cut my teeth on the old holden 6s in the day ! And here's me thinking in the day it was also the 300ZX and the Mitsubishi GT3000 ! All, as well had good lines, but always seemed to need finishing off, style wise.
×
×
  • Create New...