Jump to content
SAU Community

Recommended Posts

350Z aftermarket front bar.

not needed, 300 dollars

http://www.gumtree.c...lack/1004761098

linky ^^

would post photos but my computer for some reason wont allow.

not needed due to not fitting it on the car.

txt me on 0422360999 or pm me but txt prefered

Edited by buzz350

sad day

http://www.skylinesaustralia.com/forums/topic/405666-1996-black-ecr33-sa-300-rwkw-one-of-a-kind/page__pid__6461441#entry6461441

have available seperately

GTR interior

whiteline swaybars

kazama castor rods

whiteline rear camber arms

defi 60mm gauges

shadow 60mm gauges

greddy/trust oil cooler and relocator

4" titanium exhaust

Titanium strut brace, still not 100 on both Ti items but ill take interest in them

hey all got set of quality jap wheels for sale 17x9.5 +15 all round KT designed by Keiichi Tsuchiya "drift king" .. they have been sitting in a garage for about 6 years (away from rain etc) got some tires with good tread.. i dont know for what price these sell but throw me some offers and im in no rush or no need to sell them so no lowballing please :P

location: Athelstone

contact me on 0415440332 prefer txt

post-87705-0-95020100-1343311236_thumb.jpg

post-87705-0-91425700-1343311252_thumb.jpg

hey all got set of quality jap wheels for sale 17x9.5 +15 all round KT designed by Keiichi Tsuchiya "drift king" .. they have been sitting in a garage for about 6 years (away from rain etc) got some tires with good tread.. i dont know for what price these sell but throw me some offers and im in no rush or no need to sell them so no lowballing please :P

location: Athelstone

contact me on 0415440332 prefer txt

Rules are to put the price so lets say $1000 ono

FS

Sparco Sprint V seat + Bride lo-max rail (passenger side) for R32 (think it says A31 on the rail too)

Seat has had minimal to no use, same as rail.

Will check the date, but the seat has 6 good years left date wise (early 2009 purchase, 2008 dated seat)

$400 for seat + rail

Will consider swap for an in-date FIA stickered wider (say a +1 or +2 wider) seat. No reclining seats

Contact via PM

(pics up in the morning, currently in the car)

1. r33 s2 diff, manual tailshaft and complete rear brake setup - $300 need it gone asap

2. s2 both doors with glass/mirrors trim

boot lid with lock and s2 spoiler

mspec side skirts

right hand guard

brake lights with covers

rear bumper

s2 dash

$600 the lot

PM me

Stainless steel top mount manifold suit rb20/25 with 2 bolt 38mm wastegate flange (BRAND NEW) $200

Stainless steel top mount manifold suit rb20/25 with 4 bolt 50mm wastegate flange (USED) $200

MTX jackhammer 12" 250wrms in ported box $100

kicker 400wrms mono block amp $100

standard rb25 turbo $125

standard S1 RB25DET coil-packs $30

50mm external wastegate (4 bolt flange) $40

intercooler piping suit rb25 with standard position turbo and crossover $50

2x 14" 4x100 steelies with good tread suit honda $30

Open to offers guys, need this stuff gone. All in good working order.

Pics on request.

PM if you're interested or txt me on 0425366582 :) cheers

Selling my Water Intercooler kit as shown in this thread - http://www.skylinesa...05#entry5927305.

The kit in question is this one - http://www.frozenboo...6161710e43dad20

Cost me about $600 for everything, however the front mounted radiator component was punctured so i've taken the opportunity to go back to a factory side mount cooler and start returning the car to stock in preparation for an upgrade later this year. :) So the buyer would need to source a new radiator or attempt a repair (unlikely I think, I already had a go unsuccessfully). You could grab a cheap small radiator from a wrecker and you'd be ready to rock and roll.

If you're thinking of entering the world of water intercooling I highly recommend it! All of the benefits of a big front mount cooler without the intake lag that comes with it.

Everything in the link above is included + hoses, fittings and custom mounting hardware to suit an R33.

$200 for the lot.

Some aftermarket parts to sale, and offering to fellow South Aussies first before throwing on the general board. These seem to be the going prices but open to reasonable offers if you can show me a cheaper price on the board :)

R33 RB25DET PowerFC & Hand controller - $1150

6x Side feed Nismo 555cc injectors (yellow top). Pintle caps are all intact. $450

If you want both I'll do a combined price of $1500. Also after a stock R33 GTST turbo so would be happy to give some $$$ off in trade if anyone has one.

PowerFC is gone! Price reduced-

Water/Air Intercooler kit - $150 firm.

Nismo 555cc Injectors - $400 firm.

Also selling a stealth spoiler/duck lip spoiler in white - looks identical to this - $100.

Edited by Ionos

have a set of standard 16 inch 33 gtst rims

great condition, hardly any rash with

4 very new 225 wide tires fitted.

$500 ONO

Also have a standard SMIC and plumbing,

$25 ono

A standard dump pipe, its very heavy and would hurt if you hit

someone over the head with it

$10 ono

PowerFC is gone! Price reduced-

Water/Air Intercooler kit - $150 firm.

Nismo 555cc Injectors - $400 firm.

Also selling a stealth spoiler/duck lip spoiler in white - looks identical to this - $100.

PM'd :thumbsup:

R33 gts, gts-t gtr cooling panel (full size) - $150

R33 gtst rear camber arms - $80

Sparco sprint (blue) with r33/r32/a31 rail (barely used, as new) - $650

AM Performance split system exhaust fits r33 gts-t/gtr with decat pipe - $850

Pics:

th_2011-09-22143013-1.jpg th_camberarms1.jpg th_IMAG0533.jpg th_IMAG0581-1.jpg

Edited by SkyHi_33

I Have recently written of my 34 4 door gtt,.. I have purchased a gt and swapped my manual trans and engine from gtt and put into gt shell, so I have a combination of parts available from gtt and gt. series 1 (1998, 2000 models)

ITEMS NOT AVAILABLE ARE:

MOTOR, MANUAL BOX AND TAILSHAFT, CLUTCH PEDAL/CYLINDER, BRAKES/HUBS, and various other bits that have aready been sold.

All items are located in Adelaide hills (pickup preffered) can post at buyers expense, but will have to bear with me, I work two jobs and it can take a few days to pack and get to a post office due to this. I am open to reasonable offers and prices are not 100% firm, but please no low ball offers, time wasters AND IN THE SAKE OF KEEPING THIS THREAD CLEAN PM ME, OR EVEN BETTER SEND ME AN SMS OR PHONE CALL FOR A PROMT REPLY!!! I AM IN NO HURRY TO SELL ALL THIS< JUST THOUGHT TO START CLEARING BITS OUT SO PLEASE DO NOT WASTE Y TIME WITH STUPID OFFERS OR SAY YOU WILL PURCHASE OR COME UP AND THEN NEVER FOLLOW THROUGH- I AM VERY BUSY AND DONT NEED HASSLERS. THANKS :)

GT Air box with Snorkel $40

Gt Automatic gear box with tailshaft $200

GTT Airconditioner Compressor $100

GT/GTT/GTR headlights pair $400

RHS fender $150

2 x LHS Fenders (both have a small lip on the edge from tyres nothing major) $150 each

Bonnet (has several hail damage dints, would most probably need to be resprayed by new owner and remvig them would be an easy and cheap job) $180

GT front bar $150

Pair of GTT headlight Brackets $20

Pair of GTR headlight backets (needed for GTR front end conversion) $150

GT bonnet catch support $20

GTR bonnet catch support(needed for GTR front end conversion) $100

GTR bonnet hinges (both slightly bent from accident- id imagine a hammer and a vice and all back to normal- make an offer)

GT front reinforcement bar $80

pair of frot bar orange indicators $40

Pair of fender orange indicators$10

ABS Unit $150

Carbon canister $20

GT Dash (No Vents) $50

GT Auto dash Custer (just cicked over 100,000 kms) $80

Carpet $80

Seatbelt (set of 5 with rear buckles)$100

Door locks and ignition barrell with key- have lock box also if required for remote key) $100

Drivers door $150

Drivers door card (speaker painted silver and handle surround) $20

Passenger door$150

Passenger door card (speaker painted silver and and handle) $20

LHS Rear door card $20

LHS Rear door glass $40

LHS Rear door window switch $10

RHS Reah door card (painted handle silver $20

RHS Rear window switch $10

RHS Rear door $150

Drivers door window/mirror switches, (painted silver) $40

Passenger door window switch (painted silver)$20

Sunvisor pair $20

Parcel shelf $20

Roof lining $40

Boot lid with spoiler holes$100

Spoiler $50

Boot carpet $20

Space saver rim $40

Boot lining $50

Drivers scuff panel $20

Passenger scuff panel $20

RHS Rear scuff Panel $20

LHS Rear scuff panel $20

A Pillars pair (re fabricated) $20

B Pillars Pair $20

C Pillars Pair$20

Pair of what i beleive is the fogdriving lights that sit next to the indicators in some gtt front bars $50

RB25DET injectors (115,000 km old) make an offer

RHS Tail light $100

LHS tail light $100

Rear bumer (minor mark will come out with respray) $150

Series 2 factory plastic rear pods $200

Series 2 Factory plastic side skirts $200

Weather shied set $100 slight damage to one

Rear windscreen $100

Tripple gauge cluster (gauges only) $40

Hicas computer make an offer

Hicas unit $50

Heater $100

Roof handles set $20

Front steering rack- with crossember and sway bar $300

rear subframe (yet to remove)

Diff (has the one ABS sensor- not the one with two sensors $250

Handbrake with cable $80

SRS control box, make an offer

Steering wheel with airbag GT auto (some wear) $150

RHS Lower Control arm $50

LHS Lower Control arm $50

RHS castor arm $40

LHS castor arm $40

GTT dump pipe make an offer

Nismo exhaust (think its a 2 1/4" il have to check) cat back(knocked out cat)suit N/A $350

Rear seat $150

Front seat pair-no seat belt buckles (will sell once they have been dry cleaned to remove some grime- should be done in a week or two) $300

rear reinforcement bar$100

body loom make an offer

headight loom make an offer

inside fuse box $10

fuel flap $20

GTR ( the small reo bar that attactches to the headlight brackets and sits under where the top of the bumper goes) $40

GTT (the same bit as above but GTT)$20

GTR ( plastic strip with rubber on it that sits on top of gtr bumper $40

GTT below headlight brackets (pair) $50

GT NEO engine cover $10

GT fuel pump make an offer

GTT brake master cylinder and booster $150

mat set $80

have a gtr front bar thats been damaged in accident (make an offer) can mms pics repairable

Aftermarket rear adjustable upper arms - unsure of brand $50

Hicas lock bar (unsure of brand) $40

There is probably bits I have missed feel free to ask away- have sold a lot of interior bits hence not listed.

have various bits,like control boxes etc under dash, looms, bits n pieces, various brackets...ask away.

SHELL IS WRITTEN OFF and at this stage has a home.

Contact me via sms/phone please if possible 0419837474

Cannot be bothered uploding a pic of every part in here so can email and mms pics if required.

FOR SALE

Nismo Front Camber Arms to suit R32

bushes are in good condition , some of silver paint is coming off.

Non Adjustable type. but have the stiffer Nismo bushes

The bushes in these are stiffer than standard

quick sale $70 NOW $50

will freight Aust wide (extra)

These are over $500 new from nismo

Same as arms in this link http://www.rhdjapan....yline-r32-51945

pick up Tee Tree Gully area

0422444532

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Some of them keep working fine. 9 out of 10 of them end up causing an absolute misery bleeding the system and get thrown on the workshop floor in a tantrum and never thought about again because they were never really needed and just added crap to the car that we could have done without. Same-same with HICAS, A-LSD, and various other stupidities that over eager 10x engineers thought we had to have.
    • Not required but appreciated. Super Coppermix Twin even the non-competition model feels like the pedal is noticeably heavier than stock which was pretty well judged IMO. I'll be swapping in the Nismo operating cylinder soon to see how that feels.  Personally I haven't felt anything that justifies replacing the damping loop, at least compared to more modern stuff where the clutch delay valve is actually quite noticeable.
    • He made that comment in my thread - In my case the vents ARE to lower engine heat, when the car is not moving, which is the only scenario I have heat problems with the aircon on, sitting in traffic, on 40C+ days. I can't imagine a scenario that this NC needs any at this point in time. I do not know if it will actually make my cooling when the car is MOVING worse, and I sincerely hope that won't be the case. If it does, well, um, f**k.
    • Nice, thanks. Thats why I was asking, there'd been a fair bit of discussion in the E90 world about vents and where it makes sense to put one (ie, over the filters is not great as that is inline or slightly behind the struts and in higher pressure area). I struggle with air flow and pressures. It sill weirds me out that a radiator in the boot can work. 
    • Neither really Vents, when located in the right place, will lower the engine bay "pressure", as air has a path to escape, thus lowering the engine bay pressure, thus.....improving the efficiency on the coolant stack (read: IC, condenser, radiator) This is why the Blits vented bonnet on my 33 worked so well, the vent was in the front 1/3 of the bonnet, which put it right after the radiator  If the vents are to far back toward the windscreen, which is a high pressure zone, it can actually force air into the engine bay, causing higher pressure and effectively loosing efficiency on the cooling stack, like the fab of raising the rear of the bonnet, which does allow heat to escape, but only when the car isn't moving  There's heaps of cool "fluid dynamics" info out there, but, I'll attach a video of a 'Merican joint that focuses on "Miatas" as I found it when looking into vents for mine, they explain it way better than me  
×
×
  • Create New...