Jump to content
SAU Community

Recommended Posts

r33 rear strut brace $100

r33 silver s2 rear wing $40

r33series 1 headlights no broken brackets not foggy need a polish if your fussy $250

r33 gtst front calipers and rotors $250

aftermarket purple fuel rail to suit rb25 with greddy style plenum $50

r33 A pillar plastics $20 pair

Surge tank round polished single outlet bottom $70 (going duel outlet surge if someone wants to swap?)

stock rb25 cross over pipe with stock bov $20

GT3076 front and rear housings (5 bolt .63 rear) $150 the pair

r33 stock thermo $20

Hey got a few bits for sale

Rb20det low mount stainless turbo manifold,new never fitted

$150

Brand new Bosch

040 internal fuel pump

$200

R32 GTR nismo strut brace

Matt black colour with brake master stopper

$150

R32 front camber arms

Fully adjustable

$150

Rb26 rocker covers (stock black)

Coilpack cover (blue needs paint)

Nitto clear cam cover

Rb26 cam gear backing plate

Everthing you need to bolt them to your rb20

$500

Blitz I-d SBC all parts you need to install in your car

$350

Alpine type s

15inch subs x2

$500 pair or $250 ea

Part no... sws-15d2

Hks timing belt

$150

S13/r32

Solid subframe bushes

$100

R33 turbo

Front calipers

$150

R33 bn side skirts and

R33 bn rear bar

Suit 2 door coupe

$350

R32 gtr front brakes

$300 complete

R32 gtst front brakes

$200 complete

Got a bran new apexi data logit that im looking to sell as im thinking of selling my power fc too.

Its so new i havent even plugged it in and used it yet. Comes complete with everything needed to use the program.

$300 I can post if need be at your expence.

RB25DET r33 turbo with oil and water lines. Good condition the usall slight shaft play. Doesn't blow smoke. Due to upgrade i no longer need. $300

RB25DET exhaust manifold. Due to a GTSR manifold i no longer need. $100

RB25DET standard injectors with out rail. Upgraded to larger items. $100

RB25DET inlet manifold. Doesn't come with throttle body or tps. Going ffp so i no longer need. $80

All items are for a S2 motor. If serious please pm me.

Adam

Bump make offers

4x varrstoen 2.2.2 19x10.5 +15 in chrome

4x kuhmo ku36 275 semi's

4x toyo r888 295 6-10 laps (near new)

$2400 the lot

kakimoto cat back stainless steel (full mega n1 +rev model) very near new immaculate and sounds tough

$750

r32 headlights x2

$200

contact via pm

cheers

HKS GT2535 Full Kit for R33 RB25DET. Great condition with minimal shaft play, about 50,000kms travelled and plenty more in it. Ready to bolt straight up to your GTS-T.

Includes turbo itself, elbow and silicone joiner/shield, all lines, basically everything you need to swap out with your standard turbo. I'll include some new turbo to manifold bolts. An easy 250-260rwkw with supporting mods.

$800 ono. Pickup from 5098. Makes me sad I pulled it off the car at this price.

Got a bran new apexi data logit that im looking to sell as im thinking of selling my power fc too.

Its so new i havent even plugged it in and used it yet. Comes complete with everything needed to use the program.

$300 I can post if need be at your expence.

RB25DET r33 turbo with oil and water lines. Good condition the usall slight shaft play. Doesn't blow smoke. Due to upgrade i no longer need. $300

RB25DET exhaust manifold. Due to a GTSR manifold i no longer need. $100

RB25DET standard injectors with out rail. Upgraded to larger items. $100

RB25DET inlet manifold. Doesn't come with throttle body or tps. Going ffp so i no longer need. $80

All items are for a S2 motor. If serious please pm me.

Adam

Nissan R33 Gts-t Cushion Button Clutch

Just came out of my R33 gts-t and has plenty of life left in it. Only been in for about 15,000kms and car has only been used as a daily (female driver). Was only taken out to be replaced by something lighter for everyday use. RRP: $535

Looking for $150

 

i assume that will hook up ok to a 34gtt, with a 33 manual box?

how much heavier than a normal HD clutch,

ive had a ceramic button clutch in my 32 which just didnt work in traffic

sorry dont mean to hyjack

how was it to drive in traffic? cussion buttons i thought wer ok, what was it replaced with

I didn't notice it any more to be honest, got used to it quickly but had to pull it out anyway while doing the gearbox, so just put a new Exedy heavy duty back in. Wasn't much point having it in when I only go to and from work.

On 17/01/2013 at 8:39 PM, Nikki-33 said:

Nissan R33 Gts-t Cushion Button Clutch

Just came out of my R33 gts-t and has plenty of life left in it. Only been in for about 15,000kms and car has only been used as a daily (female driver). Was only taken out to be replaced by something lighter for everyday use. RRP: $535

Looking for $150

 

SOLD

HKS GTSS .64 housing

good condition, suits SR20 or CA18

was run on my CA18DET and made 180kw on 14psi, could easily make 200kw with more boost and is very responsive

$600

Bride rix reclinable

comes with rail to suit s13

has a few tears

$250

post-70990-0-79192100-1358649456_thumb.jpg

Hi Guys

Im selling up my parts I had planned to go onto my 180SX. Its a complete bolt on high mount turbo kit. All the parts needed are in this kit so its ready to bolt on and tune.

All parts are new and never used, some have been bolted to my engine but then removed without being started as Im selling everything including the car.

Kit consist of the following,

Kinugwaw TDO6SL2-20G T3 8cm V band exh housing external gate with complete braided line fitting kit and all nuts, bolts, studs and gaskets needed.

Tial 38mm MVS wastegate in black.

Kelway high mount T3 steam pipe manifold

Kelway s/steel dump/front pipe with removable wastegate return to convert it to a screamer when the need arises

Kelway 3 inch aluminium turbo intake pipe with NEW silicon joiner

Kelway 2 inch aluminium turbo outlet pipe with NEW silicon joiner

New oil drain and cam cover hoses wrapped in NEW Aeroflow silicon heat sleeve

Aeroflow NEW fittings to adapt the water lines to the turbo so they fit neater than the supplied Kinugawa gear

So its a complete kit with the only thing you need to add to is a manifold gasket if you dont already have the re-usable S15 style gasket.

This complete kit cost me $2700.

Price $2350.

Bosch ID 1000cc top feed injectors with loom plugs. set of x 4. NEW never used.

Price $460

Aeroflow billet top feed fuel rail kit for S13 SR

Comes with NEW Aeroflow fuel fittings to connect it all up.

Price $180

Turbosmart FPR 800 adjustable fuel pressure reg with Turbosmart fuel pressure gauge and Aeroflow fitting to connect it all up. All parts NEW.

Price $220

Send me a PM if your keen on any parts.

ALL LOW BALL OFFERS WILL BE IGNORED

Cheers.

Bump people.

Will take $2100 for the turbo kit. Need it gone ASAP.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That ring thing is interesting how it's holding everything together 
    • Hey guys. I have a 400R on its way to Australia from Japan currently and have a few questions I’m hoping others may be able to help with.   Wondering if anyone here has had any luck getting the Sat nav unit to work in Australia!? Assuming the Stereo is as simple as a band expanded and tv won’t work?  Seeing as they’re based off a Q50 which is Aus delivered is there any way to link that system to the nav? Nav modules and head unit are different part numbers and appear slightly different at the rear with plug ins etc. can I put my xtrail sd card into the rv37 and will that convert the maps or update to Australian? Has anyone got any advice here?     also has anyone fitted the factory remote start and Security system once it’s landed in Australia? I put an enquirey to Nissan Japan in via a third party, and they suggested it needs a Nissan Japan dealers device to setup and couldn’t guarantee if one here could do it or not. They can supply and I can physically fit it but to setup I would need a dealers device. Any information here would be appreciated also. I’ve seen one here with it fitted already prior to leaving Japan at a dealer/inporter, so clearly passes compliance and works when fitted Japan and doesn’t need changing here.      also, does the tyre inflation sensors work here? Does anything change with them when the vehicle arrives? Where are they actually situated? I’ve read they have batteries and they need to changing at times and seems like resetting involves the nav system?    any help here would be appreciated and any other aust specific information to help would be great. Looking forward to see what the current generation skyline is like and eager to see how many of the gadgets can be utilised here.  Thanks in advance 
    • Do need to take it with a pinch of salt. One of the adapter failures, they clearly had setup issues with the flywheel.  One of the slipping ones I spoke to and it was pretty clear the throwout was riding, rather than fix, just swapped to a new clutch.    These clutches are being put in anything from 5k offroad 4x4 beaters, GR yaris, 500hp commodores to 1200hp barra monsters. Bound to be some issues in some of them when they are not a simple bolt in affair due to the changes in height.    There is a lot going on in this picture and unless I did the job myself no way to tell what really happened. 
    • I did this mod in 2019  You just have to modify the top bracket of the ABS/TC/Fuel Pump Control ECU so it sits more upright and closer to the back seat and run a good quality positive battery lead from the engine bay, the negative lead i just bolted down to the body in the boot.
    • Damn... Not the feedback I want to hear.
×
×
  • Create New...