Jump to content
SAU Community

Recommended Posts

FOR SALE:

BITSUS Customs OIL/AIR SEPERATOR

Looks like so:

http://www.facebook.com/media/set/?set=a.124255994253983.20680.123901314289451

to suit RB26/GTR's

Supplied as a full kit:

# Catch can

# All Hoses

# Clamps

# Mounting Brackets

# Replacement Oil Drain

# Breather hose Adapter

The design of this catch can allows for all collected oil to be drained back to the sump, allowing cleaner air to enter the intake system, providing more power to the engine.

The one I'm selling is powdercoated black with black clamps - it's been used and was fitted on my GTR but now I've taken it off ready to be sold.

Price: $200

R33 stock air box and snorkel with near new apexi pannel filter $100

img0508uy.jpg

By joey_5004 at 2011-07-14

nissan 5 stud 15mm spacers with all studs $80

img0507hw.jpg

By joey_5004 at 2011-07-14

r33 stock coolah with all pipes $80

img0506j.jpg

By joey_5004 at 2011-07-14

r33 sers2 rear seat set in mint con $100

img0502th.jpg

By joey_5004 at 2011-07-14

r34 set of GT-T rims with out tyres $250

img0503lg.jpg

By joey_5004 at 2011-07-14

r33 stock front shocks and stock rear springs$80

img0505v.jpg

By joey_5004 at 2011-07-14

r33 rear shocks KYB buzz spec damper adjustable(broken studs on top hats)$60

img0504r.jpg

By joey_5004 at 2011-07-14

r33 aftermarket front bar, needs paint. has afew cracks and is missing the left hand side cover over the fog light $200

img0509bb.jpg

By joey_5004 at 2011-07-14

Pm or 0431528958 ..

joey

Edited by joeyy

FOR SALE:

BITSUS Customs OIL/AIR SEPERATOR

Looks like so:

http://www.facebook.com/media/set/?set=a.124255994253983.20680.123901314289451

to suit RB26/GTR's

Supplied as a full kit:

# Catch can

# All Hoses

# Clamps

# Mounting Brackets

# Replacement Oil Drain

# Breather hose Adapter

The design of this catch can allows for all collected oil to be drained back to the sump, allowing cleaner air to enter the intake system, providing more power to the engine.

The one I'm selling is powdercoated black with black clamps - it's been used and was fitted on my GTR but now I've taken it off ready to be sold.

Price: $200

sold, pending payment

Hey guys for sale is my R33gtst Shell with Engine, gearbox, diff etc from my project R33 i was working on for many years but ended up scrapping.

The shell is in good condition but could do with a good cut n polish and a buff but theirs no damage with the panels at all. The shell has been registered in SA and has never been defected so its completely re registrable.

This car is perfect for anyone with time and spare parts to bring this car back to life and get her going again.

The price im asking is 2k for the lot and this will come with anything i have thats skyline related (some things are a brand new genuine URAS R34 front bar, his pod, apex pod filter brackets and more)

The catch to this is for anyone that would like this they will need to supply their own suspension, wheels & nuts to get it out from my backyard.

Awesome price and for anyone thats interested and has time and the best place to contact me is on [email protected] and i can supply photos organise an inspection etc

Thanks

I know this is the wrong thread but for some exposure

STOLEN

Mates dark purple/blue resprayed R32 2 door GTST was stolen from out the front of his work (solitaire workshop off south road) this afternoon, the c*nts reved the shit out of it right past the workshop showing off. It has a GTR front bar and gold rims, completely stock apart from this and exhaust. Really stands out with the paint.

Plates are XEP695

He had no theft insurance (silly) so really hoping to get at least something back. If anyone sees anything give the police a call and me on 0423 277 771 thanks guys

For Sale

Item: Full Set of ACL 7M2428H-STD RB26 Main Bearings.

Condition: Slightly Used, Brand new.

Reason For Sale: I had my Block machined up and bought these bearings from the machinist as that's what they suggested. Upon test assembling the Block, Bearings and crank, and checking for "runout" found the crank to be out by 1-2thou. I am getting the crank machined up to get this fixed, so the clearances are going to be different, so new bearings are needed and new bearings are going to be needed. 2 of these bearings were placed in the Block and coated with oil, the rest were not used at all.

Price: SAU Special - $100 Hand Delivered within SA CBD, pick available. Postage anywhere else in Aust $5.

Contact: PM me

Hey guys.

Been out of the skyline scene for a while now but i've still got a few bits and pieces laying around that i have no need for.

Audio (all excellent quality gear)

MB Quart PVI216 6 1/2" Component splits, as new condition $250 (theyre ~$600 odd dollars in JB Hi-FI)

Eclipse 12" metal cone subwoofer in slim black box with tie down straps $150

Infinity 7540a Reference series amplifier. 4 channel 111w RMSx4 @4ohms. Very powerful and brilliant sounding amp $350

JL Audio 6" 2 way speakers (~70w rms) $70

Other stuff:

R32 speedo cable, Brand new, still in Nissan Bag. $70

RB20ET (yes, RB20ET not a misprint) timing belt, Brand new, Genuine Nissan, still in bag $20

FET Turbo timer with wiring harness removed from a HR31 $20

RB30 Rear main seal, Brand new, still in Nissan Bag $20

R32 series 2 (Blue dials) speedo with Red LED's, 55768 kms $100

Tomei Hicas lock II - Hicas lock module $20

Stainless twin 2 1/2 exhaust splitter $20

Bag of HR31/ Passage dash/ console buttons, switches and bits $20

Black drift button $10

OR if someones keen, come make a reasonable offer and take the whole lot off my hands. (Pretty firm on audio gear prices)

Pm me or sms me on 0431320803.

Cheers, Reece

R33 stock air box and snorkel with near new apexi pannel filter $100

img0508uy.jpg

By joey_5004 at 2011-07-14

nissan 5 stud 15mm spacers with all studs $80SOLD

img0507hw.jpg

By joey_5004 at 2011-07-14

r33 stock coolah with all pipes $80

img0506j.jpg

By joey_5004 at 2011-07-14

r33 sers2 rear seat set in mint con $100

img0502th.jpg

By joey_5004 at 2011-07-14

r34 set of GT-T rims with out tyres $250

img0503lg.jpg

By joey_5004 at 2011-07-14

r33 stock front shocks and stock rear springs$80

img0505v.jpg

By joey_5004 at 2011-07-14

r33 rear shocks KYB buzz spec damper adjustable(broken studs on top hats)$60

img0504r.jpg

By joey_5004 at 2011-07-14

r33 aftermarket front bar, needs paint. has afew cracks and is missing the left hand side cover over the fog light $200

img0509bb.jpg

By joey_5004 at 2011-07-14

R33 seris2 front grill in silver.. has a clip or 2 missing and afew scratches $50

Pm or 0431528958 ..

All prices NEG need them gone ..

joey

Edited by joeyy

items added

RB25det sump $30

R33 sr2 wing needs paint $30

GTR wing no end caps needs painting $150

R33 Air Conditioning Condenser gtst 1994 $35

R33 gtst sr1 front wiper motor $30

R33 gtst sr1 rear wiper motor $35

R33 gtst sr1 climate control $35

R33 gtst fuse box and cover $20

R33 gtst sr1 bonnet hinge set $15

R33 gtst overflow and washer bottle $25 for both

R33 GTST MANUAL ACCELERATOR/BRAKE/CLUTCH PEDAL SET $50

RB25 R33 GTST SR1 CAS CAM ANGLE SENSOR AND BRACKET $45

R33 RB25 skyline power steering reservoir with lines $20

RB25det sr1 stock injectors all work fine but some have broken plasic ends but can replaced $20

R33 Air Conditioner Compressor with lines as seen in pic $55

RB25det sr1 aac valve $40

r33 gtst sr1 carbon bonnet $400

fiberglass vent (uncut vent) $50

rb25 turbo 45v2 has a blown seal $50

R33 gtst sr1 abs unit and bracket $60

Rb25det sr1 flywheel $40

R33 gtst coupe sr1 door handle's $30

R31 sr3 grill $10

R31 sr3 bits lot $15

R33 rb25 engine mount brackets(mounts are rooted as seen in pic)$25

R33 gtst light garnish $30

R33 centre interior light plus other? $25

R33 turbo oil drain pipe $10

rb25det sr1 crankshaft(pulled from running engine with 80k and only 10psi stock turbo) $80

r33 horns $10

r33 sr1 bonnet in primer has a few scratches and a small dint from sitting in the shed $120

catco high flow cat 2.5inch 325mm long $50

apex rb25 front pipe 2.5inch has a few dings $70

Nismo muffler 2.75mm inlet with 4.5inch tip $100 plus rear section that suits r33 free with muffler

RB hard oil turbo line $25 (not sure if its rb20 or rb25)

RB hard water turbo line 1 $25 rb20 rb25?

RB turbo hard water line 2 $25 rb20 rb25?

R33 gtst window wiper set $ 15

R33 gtst sr1 electric driver side window switch and loom $50

R33 gtst sr1 passenger side electric window switch and loom $45

R33 gtst sr1 2door seat belts(not sure if its complete) $50

R33 gtst sr1 air con units that sit behind the dash $100

rb25 custom coil pack cover never used(nismo)$70

RB20 RB25 Coil Pack Mounting Brackets(might be some bolts missing) $20

pioneer reverse camera bought it 2 years ago for $100 from jb hifi but never used it. $25

vr v6 commodore sedan fuel sender and pump(pulled from running car but hade different plugs to myn) $40

rb25det sr1 head in good condition pulled from running engine 80k and only 10psi stock turbo $120

PICS http://www.skylinesaustralia.com/forums/topic/364044-shed-clean-out/page__st__40

pm me or 0435888239

Will post at buyers expense

Dave

Ive got a brand new NPC clutch still in its wrapper and all sealed up. comes with thrus bearing and is a complete kit. Its a 10inch carbotic sprung centre clutch with a 1200kg pressure plate. I run this exact same clucth in my drift car and it holds 360 rwkw no worries. nice and light peddle and very driveable! will take everything you can throw as it.

will suit RB20/25/26/30

Price $700 + postage if outside of SA

267811_2116828273661_1034359196_2358274_1583773_n.jpg

284310_2116827073631_1034359196_2358272_8061562_n.jpg

F.S. Selling My Rims. I did get these rims off another member here but have not put the rims on my r33 yet.

Item: BBS RGR in Diamond Black + Falken FK452

Condition: Excellent

Price: was $3299 now $2900

To Fit: Nissan R32,33,34, V35, S15, Ford, etc

18x8.5 +36 Falken FK 452 235/40/18 90%

18x9.5 +38 Falken FK 452 265/35/18 90%

some more info from the seller i got the rims from

Genuine BBS forged wheels and rare in the present offset and widths. Retails in Japan for close to 4k wheels only not including shipping and duties. Tyres are virtually brand new which cost $1200 retail. Had them on my GTT, no guard mods needed. No gutter rash at all. Few paint chips from everyday driving. Pick up or interstate buyers to arrange with my self for delivery options etc . Price is slightly negotiable first in best dressed!

Contact: call me on 0457599706(Allan)

Hey boys & girls of SAU

I have a pair of BRAND NEW HI FLYS in 235/45/17 still with the stickers on them for sale

HIF_HF201.JPG

Wanting $160 for the pair

Were purchased for 10/10 Matsuri, given the conditions out there, they just didn't get used.

Having a small break from sliding for a few months so these just simply won't be needed.

PICKUP // Can organize meeting somewhere if need be.

(or delivery for a small fee)

WESTERN SUBURBS, ADELAIDE

0433 - 830 - 055

Thanks,

Wayne.:thumbsup:

For Sale:

1 x Apexi Power FC Boost Control Kit to suit any RB26

Missing Black hoses, similar material wouldn't be hard to source

IMG_0288.jpg

IMG_0295.jpg

IMG_0296.jpg

Name a reasonable price

1 x Nismo Side Winkers

IMG_0297.jpg

$80 - The inside fitting didn't match the wire end of my 32. Feel free to come and have a look at them

PM or call Matty on 0457408477

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Thanks! Will get it looked at before winter 🥶 other than that she's a mint ride love it aye 
    • FWIW a lot of the local owners that do a big build tend to have cars that are perpetually broken. 
    • I just got this system but haven’t installed yet I got a Moroso sealed box (defect reasons) which will be set up same as their pic The quality is high grade, the correspondence I had with the owner (former head designer for Rockford Fosgate) was unbelievable, guiding me with what I needed. Even told me not to buy some things as it could be sorted in a different way at his loss. Just a bit of a bite with the exchange rate and don’t purchase gear in 1 hit that goes over $1,000 au, lol I forgot!  
    • Thanks mate for that reply. Very helpful.    it’s a 2022 400R so would most likely lose those features as you say.     I did a quick compare of a rv37 nav and heading for sale in Japan to q50 model. I’ll pop pics below. Seems  Japan spec head into top, nav unit second below it   below pic Q50 aud delivered     differences seem to be Aus delivered has a different plug top left hand side of head unit- not sure what and where it goes.   and nav unit Japanese tv37 had an extra plug put    Again I’m really not sure what each of these differences mean!       the actual plugs on a v37 and q50 screens look identical on both screens… pics below for comparing. (One screen was is a us delivered one) but should be same gps signals etc as Australia.    If it were as simple as swapping a nav unit from q50 aud delivered im interested -just want to figure out what the missing plug is for before spending big $ on a second hand part for it to not work, and I guess with the head unit, if the band expander does the job (I got a 20mHz so should get the range I’m after) so should narrow my issue down to nav unit only.  I’d love to know what the extra cable on rv37 does and if I eliminate that part what it’ll do to the setup,    and also, if I can figure out what that head unit plug difference is, what does that cable do and where does it got can it be altered or re-plugged?! Excuse my ignorance what is ACP/AA, what does that stand for? (Apple car play? Android air play)? so If I swapped head units to save using a band expander, I’d likely lose those better features to have an oem Unit operational. Better to use a band expander and retain AirPlay options and newer version of head unit     provably best to band expand it, and focus on the nav unit. th isn’t  a big deal/ would be cool to have it working  from what I can tel we use a PAL Signal and Japan uses a NTSC signal  I don’t know if there’s a co better or if the screen only reads NTSC, or if it’s the tv module that needs replacing… no big deal don’t need it but more of a curiosity thing on that!   Thanks for the info re tyre sensors, helpful and great to know.  I was reading the online manual off Japan website and it seemed to make it sound more confusing than it is  I guess a rim replacement would require the sensors to be moved to a new rim to carry that option over?!     Thanks for the info regarding diagnostic mode. I appreciate your help mate. Trying to brainstorm here to find a solution to get as much gadgets as I can working! I plan to get my local Nissan tech to have a look too who used to be at an Infiniti dealer back in the day to see if any thing they have or idea can find a soliton. But hoping anyone here has gone down the same route to make life easier!!   i guess identifying the cable/plug differences and what they do would be a great way of finding out if the units are transferable    thanks again 
    • No idea about the remote start part. If the V37 nav is anything like other Nissan JDM vehicles, you can't get the factory Japanese nav working in australia, a card from a different car almost certainly won't work, those cards are usually matched to the serial number of the DCU.  You could be possibly swap out the components from a AuDM Q50 to get it working, but if this is a new model (2021+) 400R, then you will lose the newer features like ACP/AA.  That said, if you have ACP/AA, just use google maps.. I assume a band expander would be required to get the local radio stations, but don't forget the Japanese FM band is narrower than ours, so you still might not be able to receive all Australian stations. I can't see any reason the tyre pressure sensors won't work here, there is the sensor unit inside the rim and the receiver nearby in the wheel well.  I have never had to change the batteries on my 2015 Q50, so I assume they last quite a while.  A straight battery change shouldn't need them to be re-registered as they are the same unit, that should only be required if you replace a sensor with a new one.   Word of warning, if you ever go into the 'secret' diagnostics mode on the main screen, DO NOT EVER do a 'reset' in this menu, it will erase all of your model specific data in the DCU and you will need a trip to a dealer to re-program it all, which would be particularly painful being an import.  This applies to the AuDM Q50 too.
×
×
  • Create New...