Jump to content
SAU Community

For Sale Thread


Cubes

Recommended Posts

Got 4 tickets for sale for the Pitbull concert, featuring Havana Brown, Timomatic, Taio Cruise etc.

Concert is for tomorrow 25/08.

Price is $100 ono

Contact via PM thanks

Link to comment
Share on other sites

HKS GT2535 Full Kit for R33 RB25DET. Great condition with minimal shaft play and ready to bolt straight up to your GTS-T.

Includes turbo (duh), elbow and silicone joiner/shield, all lines, basically everything you need to swap out with your standard turbo. I'll include some new turbo to manifold bolts. An easy 250-260rwkw with supporting mods.

$1250. Pickup from 5098.

Edited by Ionos
Link to comment
Share on other sites

have a set of 4 r33 gtr rims and tyres

all have been repainted in factory silver (2pac)

2 have bridgestone turanza er300s with only 1000 km on them so there like brand new

2 have bridgestone ts01s which have about 5000km ols so about 30% worn

all have centre caps

$990

pics can sent via mms iphone upon request

contact via pm or 0404 401 766

Link to comment
Share on other sites

have a set of 4 r33 gtr rims and tyres

all have been repainted in factory silver (2pac)

2 have bridgestone turanza er300s with only 1000 km on them so there like brand new

2 have bridgestone ts01s which have about 5000km ols so about 30% worn

all have centre caps

$990

pics can sent via mms iphone upon request

contact via pm or 0404 401 766

SOLD

Link to comment
Share on other sites

For sale

Full 3.5ich Nismo Exhaust comes with dump pipe decat pipe rear pipe and Nismo cannon

Fits All RB motor's came off skyline R33

Swap for a pair of front GTR seats

OR

R33 GTR NISMO CLUSTER 320km/h speedometer

Thanks

http://www.gumtree.com.au/s-ad/adelaide-cbd/engine-engine-parts-transmission/full-3-5ich-nismo-exhaust-came-off-r33/1004915204

Edited by MAD R33
Link to comment
Share on other sites

Standard RB25DET Manifold, Good Condition $60

Top mount RB25DET Manifold, Stainless steel, 50 mm wastegate flange, Good condition $250

Kicker 300wrms mono block amp, Good condition $100

MTX Jackhammer 250wrms sub, in HUGE ported box, good condition, sounds amazing, all about the engineered box! $100

txt on 0four253sixsix58two or pm.

Cheers

Link to comment
Share on other sites

Window glass from R32 coupe for sale

Rear windscreen with demister, Good condition. $300. Will need to solder on the wires as they had broken off (*i also have the wires and control unit from up inside the pillar on the left hand side i will include with it*)

Left and Right rear 1/4 glass. Glass is in good condition, dress rubbers on right hand side need to be glued back together once installed. $150 each or $250 for the pair

Contact via PM if interested. Pics will be uploaded tomorrow. Cheers

285951_3872838251701_2121686907_o.jpg

329825_3872842051796_1139250395_o.jpg

Link to comment
Share on other sites

1999 Nissan Stagea RS4

Front mount intercooler, G-redy turbo timer, recently serviced by Boostworks, excellent condition, surplus to needs, selling with three months SA rego

119,000kms

$9,990 Ph 0404 453 929 or 0405 291 510 or send a text

Link to comment
Share on other sites

HKS GT2535 Full Kit for R33 RB25DET. Great condition with minimal shaft play and ready to bolt straight up to your GTS-T.

Includes turbo (duh), elbow and silicone joiner/shield, all lines, basically everything you need to swap out with your standard turbo. I'll include some new turbo to manifold bolts. An easy 250-260rwkw with supporting mods.

$1250. Pickup from 5098.

Price drop - $1150.

Link to comment
Share on other sites

3" twin straight pipes - $100

Kicker sub and amp and wiring, everything you need - $250

S3 auto r31 trans, only removed for manual conversion was a good trans when in car, with crossmember, loom etc - need it out the shed $20 and it's all yours

Link to comment
Share on other sites

Set of Genuine Volk GT-C's in silver, 17x8 +35 Face 1 and 18x9 +38 Face 2. Fronts clear big brakes, they clear my brembos easily. Fronts in excellent condition, rears have a few small marks on the chrome lip.

Front tyres are stuffed, Rears have 245/40 Potenzas with a couple of mm left. Chasing $1000 for these. Which is well under the price i want for them but i need them gone!

Contact me on here or on 0407 633 573.

Link to comment
Share on other sites

for sale, all parts off r32 gtr

r32 gtr front and rear seats + door trims excluding speaker shrouds and electric windown switches $800

carbon vented bonnet $700

kakimoto cat back stainless exhaust used 4 times. $800 i paid $1300

2x r32gtr doors with electric windows, glass and carbon door trims excluding handles with working electric mirrors $1000

wide body front guards $400 the pair

r32 gtr fuel tank with walbro wired in $300

straight pipe to suit gtr with decat built in from reccolection $150

heaps more stuff that ill post up at a later date contact via pm

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Much less twat-tastic. CF wheels are too garish for civilised use.
    • From there, as the manual says....assembly is the reverse of disassembly, no tricks worth mentioning Much better (for me)
    • In my case, the standard wheel I had was in good condition but the buttons had more wear, so I swapped them across from the original wheel from the car. The plastic rear cover is held on by 4 tabs, and once the wiring is removed you can get access to 2 screws on each side the hold the buttons in From there I just swapped the wiring over. What was interesting is the standard style wheel is 2.0kg but the carbon fibre one is 50% heavier at 2.9kg. It even has a weight inside the wheel at the top to make up for some sort of imbalance in the design. weird
    • Once the airbag is off, to remove the steering wheel.... Undo the 2 plugs into the clock spring, and the horn connector from it's clip. Hit the 19mm nut with a rattle gun (preferably) or if you don't' have one, you probably want an assistant to hold the wheel in place while you use a breaker bar to undo the nut Then, screw the nut back on 3 turns, and pull the wheel sharply towards you. If that doesn't work hit it medium force with a rubber mallet on either side, or possible behind if you can get there. If that all fails (it shouldn't!) you might need a steering wheel puller
    • So, to next task....the carbon fibre steering wheel was either an expensive factory option or a chinesium special. Either way, I don't like either the flat bottom or thick ring style, so it had to go So...to remove the steering wheel.... First, disconnect battery negative and stomp on the brake pedal for a few seconds. Then, remove the small circular covers on each side of the wheel's rear surround to uncover the airbag clips. You need to push something like a flat bladed screw driver through, to push the steel clip inwards and pull the side of the airbag forward. Once you've done the easy side, same on the centre console side. You can see the tab you are shooting for circled in red Then, disconnect the horn spade connector and for the yellow airbag plug you need to get something small under the black locking tab to pop it out, then the connector releases......airbag is off  
×
×
  • Create New...