Jump to content
SAU Community

For Sale Thread


Cubes

Recommended Posts

FOR SALE 92 R32 GTS-T m version

ITS AN UNCOMPLIED JAP IMPORT SO ALOT OF DETAILS ARE UNKNOWN LIKE MOTOR MODS,GEARBOX ETC.

IT HASNT BEEN HERE LONG AND IM SURE IF U WANTED COULD BE COMPLIED AND REGISTERED.

WHAT I DO KNOW:

130,XXX

MANUAL WITH HEAVYDUTY CLUTCH

1.5MM SHIMMED DIFF BASICALLY ITS A LOCKER VERY TIGHT

RB20DET WITH LARGE 600X300X76 COOLA KIT,BOOST TEE,ENGINE MODS UNSURE FRESH JAP IMPORT.

HAS A JAP 3" EXHAUST FROM TURBO BACK INTO TWIN 2 AND 3/4 OR 3" DRIFT TIPS

HAS TEIN COIL OVERS AND IS FAIRLY LOW

AUTOMETER MONSTA TACHO,SPECO BOOST GUAGE

THERMO FAN

B AND N SPORT REAR BAR

VERTEX REAR BAR AS WELL

GTR STYLE FRONT BAR

I THINK GTR STYLE SIDE SKIRTS

COLD AIR INTAKE THRU LIGHT POSITION

6X GTS STK 16''S 4X IN BLACK 2X IN SILVER WITH OK TREAD

GTR FUEL PUMP NOT SURE ON INJECTORS

THE CAR GOES VERY WELL IS ON 12PSI ATM AND I HAD IT DYNOED BUT HAD SPARK ISSUES IT DID MAKE 165RWKW'S BUT NOT 100% ON THE BOOST LEVEL AS WE PACKED IT UP AND WERE GOIN TO RUN IT AGAIN BUT HAVNT HAD TIME.

THE BODY IS ALMOST 100% STRAIGHT WITH NO MAJOR ACCIDENTS OR DAMAGE HAS THE USUAL LITTLE DENT HERE AND THERE

THE OUTSIDE OF THE CAR HAS HAD A MATT BLACK SPRAY JOB THAT ISNT THE BEST BUT LOOKS CLEAN AND TIDY TO LOOK AT.HAS NO REAR SPOILER.

THE INSIDE IS STRIPPED TO JUST TOP OF DASH AND 1 SEAT.(HAVE THE OTHER STK SEATS AND SOME INTERIOR TRIM PARTS)

THIS IS A VERY REGREATFUL SALE BUT HAVE FOUND MYSELF IN A BAD SPOT WITH BUYIN A HOUSE AND COULD USE THE EXTRA CASH.

LOOKIN FOR $8,000 WITH ALL THE BITZ I HAVE FOR IT.

I MAY CONSIDER SWAPS FOR OTHER VEHICLES OF INTEREST.

GREAT CAR TO LEARN TO DRIFT IN AND SLIDES VERY WELL.

PICS CAN BE SENT BY MMS AS MY CAMERA ISNT WORKIN ATM.

PM ME OR 0402217466.THANKS.

Link to comment
Share on other sites

hey guys, well im chasing some new wheels so wanting to offload these rather quick. As topic says 17" rims 5x114.3, unsure of offset but they almost fill the falcon guards so gives you some idea. They are all in good condition, some minor scratches. Tyres are still in good condition, front and rear both with legal tread. Bridgestone on rear and Antyres on front. Nice looking wheels, bit of dish. I have 3 of the 4 centre caps too.

After $600, wanting a quick sale.

pics, they really need a clean, come up looking very nice after a scrub but am in a rush this morning and already in my work clothes lol.

Image009.jpg

Image005_3.jpg

Image007_1.jpg

These are still up for grabs at $500 ono. Decent offset and no scrubbing. Need them gone ASAP

Link to comment
Share on other sites

Full set of R33 GTR Vspec-2 shocks and springs.

Bought these as seller assured me they'd fit on my gts-t but was not the case.

Very good condition, no leaks, cracks, not bent etc..

Have no use for these, I paid $350 all up...

willing to let them go for $300ono, make me an offer.

PIC: http://i2.photobucket.com/albums/y33/kfsRule_2/DSCF0203.jpg

+ free GTR strut brace

$250 o.n.o

neeed to move these, taking up space.

Link to comment
Share on other sites

for sale are my racing hart rims, 18x8 i think... 38 offset... sat heaps nice on my stag

4x dunlop sport maxx tyers.. (voted best tyer by wheels magazine)

2 are brand new

2 are camber warn

asking $1500 good condition

also i have a blitz sus power LM pod with addapters n bolts etc. u can pull it apart to clean... voted best filtering pod. and sounds nice.

RB25 FMIC $450 ono

used good condition see pics (all brackets hose clamps n stuff included)

post-47249-1231505491_thumb.jpg

post-47249-1231505520_thumb.jpg

post-47249-1231505541_thumb.jpg

post-47249-1231505636_thumb.jpg

Link to comment
Share on other sites

Nissan stagea S2 1999 $15000

stock, with jvc dvd headunit, tinted windows, dual sunroofs, just serviced (every5000km) heaps clean! pm me

also

i have an apexi turbo timer also... it was never used i just took it outa the box, have instructions...

$115 ono

post-47249-1231509950_thumb.jpg

post-47249-1231509974_thumb.jpg

Link to comment
Share on other sites

r33 m spec side skirts n rear pods in WHITE couple cracks n paint scratchs but look good on the car!! need them gone asap $100 for the set

17' buddy club p1's in white with near new tyres need them gone asap $850

r33 drivers taillight in white mint cond. $40

just bought a new car so need coin asap!!

Edited by shy_s6
Link to comment
Share on other sites

for sale are my racing hart rims, 18x8 i think... 38 offset... sat heaps nice on my stag

4x dunlop sport maxx tyers.. (voted best tyer by wheels magazine)

2 are brand new

2 are camber warn

asking $1500 good condition

also i have a blitz sus power LM pod with addapters n bolts etc. u can pull it apart to clean... voted best filtering pod. and sounds nice.

RB25 FMIC $450 ono

used good condition see pics (all brackets hose clamps n stuff included)

POD now $65

Wheels $1400

car 15000

Link to comment
Share on other sites

Item: Apexi PowerFC + HC suit R34 GTT RB25DET Neo

Condition: Second Hand

Price: $1200

To Fit: R34 GTT

Location: Adelaide

Contact: PM

items have been use for only 1000kms on a R34 GTT. Sold my car so clearing out some parts still look brand new still come with the original box...more than happy to answer and will accept any SERIOUS offers.

Thank guys...

Edited by drift27
Link to comment
Share on other sites

selling my LED tail lights that i was using with my R34....

i paid $550 originally

$250 is all im asking for them now.........a few of the LED's arent working on the drivers side big tail light shouldnt be too hard too fix its prob just a connection loose or something.

Link to comment
Share on other sites

as i said b4... im selling my stagea so im parting with my parts.. i have a set of 18x8 with +38 offset. they are gold with a silver lip (about 2 cm.) they suited my stagea very very well! filled the gaurds but didnt stick out stupidly.

they are wraped in dunlop sportmaxx tyers 2 are brand new and 2 are camber warn.

$1375 ONO

can post i guess.

post-47249-1231673124_thumb.jpg

post-47249-1231673154_thumb.jpg

Link to comment
Share on other sites

well i think the time may have finally come for me to part ways with the beloved 31. hopefully the next owner continues to do with it what it does best. Here are the details.

Have owned this car since i was 16, so thats a total of almost 8 years now. Started its life with me as an S2 with a S3 Ti front. Was stock as they come so any mod on this has been done by me/mates or by professionals. Here are the specs

1988 R31 S2 GX

229,XXX kms, speedo stopped a while ago, would probly be about 270,000kms maybe.

Engine:

S2 RB25DET

Microtech LTX12 ecu

TO4E Garret turbo

Xforce top mount manifold

ASE forward facing plenum

3" turbo back custom exhaust with twin flute tips

R33 Triple Core Alloy radiator

Hybrid FMIC flipped upside down for shorter cooler piping = more responsive

Greddy Profec B Spec 2 Electronic Boost Controller

SARD 650cc injectors

Bosch 040 fuel pump

Driveline:

RB25DET gearbox running redline racing oil, very tight box

Custom built single piece tailshaft designed to withstand upto 1000hp

Minispooled diff

Interior:

Cyclops alarm

Central locking

Fuel cut switch

Currently completely stripped but if wanted i can put some stuff back in.

Sound deadener removed

2 sparco junior raceseats

Driver has sparco harness

Passenger has Monza harness

Hydraulic Handbrake

Sabre boost/oil pressure/air fuel gauges

Microtech hand controller

Dished steering wheel

Home job rear firewall, slightly ghetto but does the job for scrutineering firewall gone, rear seats are now back in.

Exterior:

factory burgundy with rattle can black bonnet, boot and roof, could use some loving.

Vented standard bonnet

S1 silo boot spoiler

Afterburner import taillights

Lipped and slightly flared guards

Suspension:

S13 brakes/calipers/hubs etc, the normal conversion bits

ISC N1 Coilover 10/8 spring rates, camber and damper adjustable

Adjustable panhard rod

Adjustable castor rods

R32 control arms

Whiteline front and rear swaybars

Whiteline front strut brace

Custom rear strut brace

Wheels and Tyres:

17x8 Koya Drifteks up front

17x9.5 Koya Drifteks on rear (full set so total of 6 wheels)

Federal 595EVO tyre up front

Maxxis MA-V1's on the rear

Power:

260rwkw on 18psi on a pretty safe tune.

Car runs like a dream, has a once over after each event to check everything is still in good shape. Good opportunity for a well setup drift car or a modified streeter if made abit more subtle. Just looking for interest/offers currently. Have easily poured over $15k into this car so i wont be letting it go cheap so no lowball offers. Feel free to let me know what you think it is worth also as i havnt really been keepig an eye on what they have been selling for lately.

G1Round2071.jpg

DSC_99301.jpg

G1Round2350.jpg

IMG_8085.jpg

dayprac258.jpg

617x617.jpg

Image014.jpg

Image027.jpg

Image028.jpg

and also a vid with bit of footage of it doing what it does best, oh i very lightly nudged the tyres in the off, no damage done.

http://au.youtube.com/watch?v=0iQqJGR-zYw

There is probly a couple of things i have forgot but this is a good start. Let me know what you think.

$10k ono with 3 months rego or would be keen on swaps for a 32 4 door.

Edited by skylineguy19
Link to comment
Share on other sites

Thinking of getting rid of my G MAX rims off my stagea. They are 18x8.5 fronts and 18x9.5 rears. bit banged up as they stuck outside my guards and it just took me ages to get used to driving a wagon. this brand however has such a massive lip on the outside that they can easily be machined many times. not sure of the offset but they are to suit a skyline but would suit a GTR or wide bodied car the best. These have a massive dish and are a great brand. Brand new tyres on the front and a bout 60% worn on the back. Im not 100% certain if i will sell them but if someone grabs them before i make up my mind then they are gone.

Asking for $1200 as these were $2800 brand new about 14 months ago

post-44842-1231763024_thumb.jpgpost-44842-1231763057_thumb.jpg

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • That's true. However, this problem has started since the tuning. First time with the return journey from the tuning. But yes, the pipe was clogged with dirt and rust. That was certainly due to age
    • Great info @tidi0x  Will definitely be handy for others and maybe me if I decide to keep the shit box H pattern.
    • Bumping this up one last time.... I wanted to follow up on the clutch slave issue. I realized that what the issue comes down to is the pocket is flat milled, and the cylinder does not want rest flat. So in order to mount it correctly you will need to make a spacer for the fingers so the cylinder is floating. I took two plates of aluminum, drilled some holes and was good. I did still need to make the relief cuts in the bell housing, as even with the spacer the bleed section still interferes. The OE bell housing the mounting holes are raised from the housing.       
    • If the event in USA goes ahead will be interesting as it seems the rules will get more cars over here. Apparently the track is laguna seca too. Yeah s15, if I get a the lower dash trims, centre console and change front cross member to standard LCA position will fit clubsprint. See how rules are as i would rather do complete widebody than a bolt on flare to run the 295 with proper clearance.
    • If the car is legal height I can't see it being an issue. Found a thread on reddit that might offer some insight.   I got a ticket from a copper in QLD for my S15 being too low. They had this wheel thing on a stick that they put under the car and it hit my exhaust. Anyhow went to an exhaust shop to get the exhaust tucked up/hung a little higher and I wound the coilovers up a smidge. Don't think I even had to go back to the police station unlike when I got defected for having a carbon bonnet when I brought the S15 from the ACT to QLD and had to replace it and then rock up at a police station and have a yougish female officer who knew nothing about cars confirm that I had changed bonnets. Should have just painted the carbon bonnet yellow to match the rest of the car lol
×
×
  • Create New...