Jump to content
SAU Community

Recommended Posts

Hey all :)

I own a 1998 Nissan Skyline R34 25GT with auto transmission, and whenever i tried to do wheel spin, it just can't get it up.

I have been told that traction control is on, so is there a way to turn it off? like there a switch i haven't seen? or yeah, someone please help me.

xx Ben

Link to comment
https://www.sau.com.au/forums/topic/354391-turning-off-traction-control-on-r34/
Share on other sites

imag0083v.th.jpg

Should be a on/off switch by your left knee under the steering wheel. Pic is from my Manual 2000 GTT, im assuming the auto is no different.

yeah i have that switch, when i flick it, it comes up saying 'snow', is that the same as yours?

There might be a fuse box that can access and pull out the fuse for traction control..? Try losing traction at a wet parking lot by making slow doughnuts, I think a light should blink in the dash to indicate that the traction control is working/not working.

There might be a fuse box that can access and pull out the fuse for traction control..? Try losing traction at a wet parking lot by making slow doughnuts, I think a light should blink in the dash to indicate that the traction control is working/not working.

oh yeah i guess i could try pull out the fuse for traction control. i just thought there was a switch like other cars, may be wrong tho.

On R34s traction control is organized by modulating secondary throttle plate inside the throttle body. Look at your engine. Locate throttle body. There is no secondary plate actuator in there - none of N/A R34 have them from factory. Hence there is no traction control.

On R34s traction control is organized by modulating secondary throttle plate inside the throttle body. Look at your engine. Locate throttle body. There is no secondary plate actuator in there - none of N/A R34 have them from factory. Hence there is no traction control.

ohhh thanks, i'll give that a look and see what i can do. :)

Yep, thought NA R34's didn't have traction control, what on earth would they need it for? This thread is a perfect example for why they would never need it. The OP is TRYING to get wheel spin and can not achieve it.

Yep, thought NA R34's didn't have traction control, what on earth would they need it for? This thread is a perfect example for why they would never need it. The OP is TRYING to get wheel spin and can not achieve it.

well that sucks, i would have been nice if i could get wheel spin, maybe not then :P

Maybe you should try to induce some wheelspin using tallspeed of your auto box? press both pedals, it should rev up to ~2000 or 2500, then release brake pedal. If that does not help, then either you'll have to live with no wheelspin or put on some narrow tires or add ridiculous amount of camber to the back.

Note that stallstart heats up ATF pretty fast, so don't hold both pedals for a long time and don't repeat this exercise very often.

Added: according to factory manual, stall speed for RB25DE is 2350-2550 rpm. FSM does not recommend holding throttle pedal for longer than 5 seconds and also says to press throttle gradually. It also says to release throttle as soon as stall speed is reached, but you should release brake pedal instead and floor your throttle :P

Edited by Legionnaire

go to a parking lot

right/left hand down full lock

floor it and see if the orange T/C / SLIP blinks in the middle of the dash?

what you mean by 'right/left hand down full lock'

and what if T/C or SLIP comes up?

You won't see it, as R34 N/A's do not have traction control. At all, period. It just doesn't exist man.. I.E it is always off.

ohhh okay, thanks man :)

thats all i wanted to know

  • 2 years later...

i have a 34 GT-4 (the non turbo 4 wheel drive model) and im wondering why i have a TC button on my dash if i dont have TC? i dont have the on off switch so im just guessing that they made the same cluster for all manual non turbo models but why would they take the turbo gage off and leave the TC on?? im confused

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hard to say what the extra connector is, it looks a bit like a coax type connector, so possibly a separate radio/GPS antenna, or even another camera input?  The V37 series (including the Q50), did go through a model refresh in 2020, since Australia didn't get any Q50s newer than 2019, we didn't get any of the refreshed models, so there could also be other unexpected problems to overcome to swap an older Q50 head unit into a new model V37. There probably aren't too many people around that have made these sorts of changes to a Q50/V37, so you might end up being the first if you do decide to go ahead. ACP is Apple Car Play and AA is Android Auto, they are roughly the same thing for the 2 major phone operating systems (Apple's iOS and Android), it allows you to connect your phone and access a number of your phone applications on your car system.  With Nav apps included, so you could use google maps/Waze or whatever your favourite navigation app is, instead of using the built in navi system.  I think this would be a better solution if it is only Navigation that you are looking as swapping the head unit for. GPS signals are the same around the globe as the GPS satellites continuously circle the globe, but it is the head unit that doesn't allow you to load Australian maps, or at least no-one had made an Australian map that will load up on the JDM head unit. Regarding the TV standards, I assume you are referring to the AV inputs?  I haven't ever tried to use them, Japan used a slightly modified version of the US NTSC system, and Australia uses PAL for composite video, that said, I wouldn't be surprised if a video input could work with either system.  That is mostly irrelevant here though, unless you plan to use those inputs for something?
    • If you've got bucket loads of $. Go single. If not, just upgrade the twins, Garrett -9's or whatever the current equivalent is for a healthy 350awkw and leave it at that. Will probably still cost you 10k to do in this day and age.
    • When you looking to buy injectors?? I could possibly sell you my 1d1700s for decent price. Done little work I just need bigger again 😫 
    • Is a dirty cheese eating surrender monkey in drag.
    • I'm late to the party. Been busy with a newborn... Keeping me up at all hours of the night.  I'll look into purchasing ID 1750's then! Thanks everyone for the concrete evidence. 
×
×
  • Create New...