Jump to content
SAU Community

Recommended Posts

Just wondering...

Had a new compressor installed.... rest of system checked out all good.... still cost $2000!!!

Anyhow.... I have connected a second electric fan on a remote switch and still the AC is only average whilst driving and only 'coolish' at traffic lights.

Is this normal or should they spit ice ???

Link to comment
https://www.sau.com.au/forums/topic/354482-r33gtst-average-air-conditioning/
Share on other sites

i would take it back. should be 5 degrees give or take at the vents. if its average whilst driving where the condensor is getting good airflow across it then maybe the gas level is over or undercharged. get them to put some gauges on it and put a good thermometer down the vent.

should be in general maintenance btw

i would take it back. should be 5 degrees give or take at the vents. if its average whilst driving where the condensor is getting good airflow across it then maybe the gas level is over or undercharged. get them to put some gauges on it and put a good thermometer down the vent.

should be in general maintenance btw

+1

Just wondering...

Had a new compressor installed.... rest of system checked out all good.... still cost $2000!!!

Depends on where you took your car for the A/C repair, my A/C repair came up around $1.5k for replacement of compressor & receiver dryer + degas & regas.

Depends on where you took your car for the A/C repair, my A/C repair came up around $1.5k for replacement of compressor & receiver dryer + degas & regas.

holy crap im gonna start up an air con business.

Could be one of your air diverter valves. It could be stuck or busted and is letting the air go through the heater core?

They tend to give some trouble, just an idea considering you just had the AC system serviced and it should be ice cold..

holy crap im gonna start up an air con business.

Yeah, got bum raped by labour costs & the shop used brand new OEM parts *cough* massive over price *cough*.

EDIT: on a side note, I seem to have a problem with my bottom air vents (the ones that blowi air on your feet), they will open when I turn the whole system off?

Edited by Mayuri Krab

Yeah, got bum raped by labour costs & the shop used brand new OEM parts *cough* massive over price *cough*.

EDIT: on a side note, I seem to have a problem with my bottom air vents (the ones that blowi air on your feet), they will open when I turn the whole system off?

thought that was normal? just to keep little bit of fresh air coming in...if not we have the same problem haha

Check the actuator arm behind the climate control (I'm assuming the car has this) actually moves when changing the temperature, it could be stuck in between (dry solder joins deteriorate and crack on R32s, R33s could be the same problem)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hey lads, reviving an old thread.  As an update, since the last time replied to this thread, ive done mostly suspension. Havent touched the motor except for maintenance. Though upon changing spark plugs, found out i had splitfires pre-installed! Updates: - Got me some stock airbox top cover and snorkel to fit onto the original intake. Should be free of defects - Bought a set of R34 GT-T brakes (not installed yet, going to rebuild + respray in champion blue + white 'Nissan' text) - Bought the last set of bilsteins from @Sydneykid and had them installed. Has been making some sounds on the rear but hopefully should be sorted out after this New Year break. - Regreased front caster rod bushings (poly bushes..) - Rear upper camber arms - Whiteline sway bars (BNF27Z 22mm + BNR11XXZ 24mm).  The rear sway bars are a bit short (ive read 50mm else where) but was still able to get them in.  Anyhows, I reckon suspension is sorted now. Maybe replace bushes (do have a set of front upper control arms from SK not installed yet) but should be okay for now. From now, I'm wanting to start working on the motor, drivetrain etc etc. Still debating on the order to go on and what to buy etc but: - ECU ( Haltech or Link ( Link states that it dont support A/T or AWD functions... Can anyone attest to this? ) - Highflow turbo ( ATR43ss2 ) - Intercooler ( Not decided yet, but cant find many good afoordable ones. Toshi says to opt for crossflow Japanese. Bit difficult this one, unless I get a returnflow Blitz from JJ? ) - Injectors ( Any recommendations ? I do have a nismo FPR ( Thanks SK ) ) - Seats - Tune by either Toshi or DVS To be fair, I did consider just keeping the stock turbo and nistuning it. Sat in a mates stock N, that had something like 200kw, and I reckon that felt more than enough. Maybe I should just go this route ahhaha. Too many choices.... Planning a trip down south, so wanting to just clean things up and make sure it gets to and from in one piece. Anything else specifically I should do before ? Cheers lads  
    • Must be for the car’s lucky charm 🤷🏽‍♂️ She runs fine, but it just seems to take about 1L less. Maybe I’ll have the oil sump dropped at some point to check if there is anything 
    • Hmmm interesting. Mine is the exact same and clearly the right one.  The mystery of the engine oil being full after 3.5-4L continues 
×
×
  • Create New...