Jump to content
SAU Community

F/s R32 Gts Non Turbo Street Or Track

smartrx4

By smartrx4,
in For Sale (Private Whole cars only)

 Share

Recommended Posts

smartrx4 Community Regular

smartrx4

Posted
Posted (edited)

[/url]hey guys

selling my r32 GTS

i brought the car damaged/ repairable write-off but have had all the work professionally done but now need to sell her to fund my gtr

i have all photo's of the work so it can pass VIV inspection,

the car is manual,just had a new clutch, engine/gear box have just been serviced

will throw in a frp gtr style front bar

the car is complete but dose need finishing off, would need some paint here and there also has 3rd gear crunchy would suit drift/track/ street or parts if needed

car owes me alot more but need it gone $4000

I also have rb25de engine, ecu and loom out of r33 s2

engine was out of lady owner car with 120,000 on the clock

has ngk iridium plugs

r34 coils and coil cover

polished cam covers

as seen in last picture can be purchased at an extra $1000 if wanted with car

d69fedc38831920539869e04957b3942.jpg

4da574348f9a933702c3c9273465d9af.jpg

67d19e109bf6339a0c7f6cd511aec8e8.jpg

23b80427f9e58bbbf12283d6492242ab.jpg

e4320cf393219287e79f84a8b2a2ab07.jpg

61d0049d70cf1e7e453d28d8d50c204b.jpg

0c26b5efd535ca5a95f1fb76642d43d7.jpg

now on ebay

http://cgi.ebay.com....em=140514226863

Edited by smartrx4
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Possible swap on R34 RB20DE NEO?

      By GTSBoy · Posted

      If the RB29 box in the car is a push clutch, then yes, you will need to deal with the pull clutch on the turbo box. You either buy a pull clutch and don't use the old one, or you do the things needed to convert the turbo box's clutch arrangement over to push. Which is a bit of a f**karound. "Making" a custom tailshaft is the easy part. But you will need to source the front clip yoke - the bit that goes into the output of the gearbox. These are not as easy to find. They are out there, but they don't grow on trees the way that they used to.
    • GTSBoy
      Turn signal wiring question

      By GTSBoy · Posted

      Indicator bulbs are way too bright to use as a "corner marker" (we call them parking lights too). Sure. Go ahead and do it. But realise that you wil need to come up with all your own wiring to do it, as no-one will have a standard howto worked out for Skylines. It's just a matter of abandoning everything that Nissan have done and starting from scratch. You'd probably be better off retrofitting tailght/brakelight globe bases into the front indicator housings and using the taillight circuit for your corner marker and the brake light as the indicator. You'd need to work out how to kill the marker circuit while the indicator is flashing, otherwise it won't flash on-off, just bright-less bright.
    • Kapr
      Possible swap on R34 RB20DE NEO?

      By Kapr · Posted

      Hi. A little bit of an update. It maybe(hope not) looks like i would need a new tranny(it would be "maybe" a cheaper or better option anyway) So i need some info. I know i need a different propshaft(i can make custom one) LSD is not a problem cuz the engine will be still(for now) N/A RB20. So if i buy RB25DET NEO tranny...is there something else i need? I read something about push/pull type but i do not know if i need to "change" something or i can just plug n play onto my engine a go? Thanks for the advice  
    • OakvilleGTR
      Turn signal wiring question

      By OakvilleGTR · Posted

      Good morning all, Bit of a random question but figured I’d finally throw it out after wondering for a long while. Before I start, I'm hoping to do this purely out of personal preference. I think it would look better at night, and don't mind at all spending a few hours and dollars to get it done. I've copied this from a non-Skyline specific forum, so I apologize for the explanation of our headlight switch setup that we all know. Here we go: Zero lights (switch off) Parking lights (switch position 1) being a rectangular marker on the outside of the housing, my low beam being the projector in the centre (position 2), and a high beam triggered by my turn signal stalk. Most North American cars I’ve owned of this era have power to the amber corner (turning indicator) light as part of the first switch (parking lights). I’d love to have these amber corners receive power when the headlights and parking lights are on (headlight switch), yet still blink when using the turn signal which is of course a separate switch. Hopefully I’ve explained my question correctly. Is anyone aware of a way in which I might be able to achieve this? Thanks in advance
    • Kinkstaah
      Mistakes were made, my R34 Story

      By Kinkstaah · Posted

      My heads are cathedral port! It's likely possible, but I don't want to add any extra moving parts (I know they don't move) between the heads, manifolds, etc. It will also affect how injectors/fuel rails etc sit and I don't really know if it would change how the FAST manifold goes/sits/fits. I have the LS6 steam pipes already as I have a very late LS1 block so it should be fine. I couldn't find anyone who had ever actually used one for this purpose, it seems 100% of people grind the water pump. The thermal spacers are 12mm and are half way to the cost of the newer water pump anyhow... so if it comes to that I suppose I'd rather buy a new pump. The bearing in the pump I do have is a little.. clunky, but it hasn't done that much time and I never noticed it when the car was together in the past few years, so..
×
×
  • Create New...