Jump to content
SAU Community

Recommended Posts

For sale is my 1989 R32 Gtr rolling shell.

I bought the car in mid 2006 from a forum user in Newcastle and i was going to turn it into a street/drag car, however the project has since been canned and it's up for sale.

The engine bay has been painted in a custom purple pearl mix. Every nut/bolt was replaced with stainless. The interior has been completely stripped, all the sound deadening material removed and the floor cleaned.

The boot and rear firewall have been modified as per the pics below. I had the boot setup to take a 20gal RCI fuel cell, 3gal peterson dry sump tank, a nitrous system and a custom fuel system. The rear firewall was completely removed and a new stronger section put in. With the new firewall, i had it made rearward of the shockie towers to allow the rollcage much easier placement. With the boot modifications, the rear boot hinge components have been removed, so pins/locks will need to be installed to mount the boot. This new work has a coat of yellow (now black) killrust sprayed over the top so it doesn't rust. All this work has been done in accordance with an engineer so the car can still be street registered.

All of the glass/windows were removed in anticipation of getting a roll cage fitted. I still have all the framework and glass etc to go with the car. (can be put back in for $300)

The car has also had the battery relocated to the boot. It's also got a lockbar installed and the complete hicas system has been removed. The std fuel lines were removed and there's currently a single -8 alloy fuel line under the car. It's also go a new set of nismo braided brake lines front and rear. I had the wheels refurbed (lips machined and 2 repainted) at Wheel Revolution in slacks creek around 2yrs ago aswell, tyres are junkers just on there to move around.

The body on the car is pristine minus the odd little scratch on the front quarter panels & a bit of white paint? on the passenger front guard above the wheel arch (stinking workshops). There are a few spots on the floorpan that have some rust but can be easily cutout and replaced.

It comes complete with all the drivetrain (minus gearbox). Full interior minus front seats and aircon. Parts missing to finish it/get it running are listed below.

The car is complete minus the following:

- Complete engine

- Gearbox

- Radiator

- Intercooler

- Front bar

- Bonnet

- Front seats

- Air conditioning/heater (dash harness has also had the aircon wires removed)

- Abs (new front lines have been made but will need to be remade in stainless)

- Fuel system

- Clutch line

- Plus any other little things i've forgotten

Price $3500ono. The car is located in Ipswich, Qld.

2j2i0aw.jpg

291jn61.jpg

nqw7y0.jpg

26442z7.jpg

4uia7n.jpg

2ijntsn.jpg

insbdc.jpg

9zw11e.jpg

2r6o6f4.jpg

10z7nkh.jpg

qx9glg.jpg

Link to comment
https://www.sau.com.au/forums/topic/354701-1989-r32-gtr-rolling-shell/
Share on other sites

  • 1 month later...
  • 5 weeks later...
  • 3 weeks later...
  • 1 month later...
  • 7 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


×
×
  • Create New...