Hks Evc-S Owners

[partyboy73]

I purchased an HKS EVC-S and in transit she lost one of the connectors... If you have one of these boost controllers what I'm asking is... for you to go look at the plug, that attatches the solenoid ( this is plumbed into the turbo's actuator hose and does the hard work ) The solenoid has a black wire and a red wire, the plug from the control units cable has a blue wire and a yellow wire. I need to know if the red wire is connecting to the blue or the yellow wires.. your help would be much appreciated

Mike

[GTScotT]

Short of having someone help you, you cannot do any damage by trying it.

Simply use a volt meter to test which wire is positive and negative from the controller (red will be + but just check anyway and its good to see how many volts it has). Then match that voltage (if its 12v just use a car battery) and put power to the solenoid. It will only alternate open and closed if you connect it the right way...... Otherwise it wont open/close properly if its back to front.

Hope this makes sense. If its any consolation I think yellow should go to black and blue to red.

GL