Jump to content
SAU Community

S2 Rb25Det Falls Into A Black Hole At 6000Rpm

Ad's

By Ad's,
in Engines & Forced Induction

 Share

Recommended Posts

Ad's Mentor

Ad's

Posted
Posted (edited)

Hey guys

I have installed a S2 RB25DET into my HR31 coupe over the last few months i regoed it over a month ago and all is good, pulls nice and seems to drive like it should. I gave it to a local tuner to put her on the dyno and run it up to see if there is any problems turns out after 9 power runs everytime at 6000rpm and making 140rwkw it drops off, he said they usally drop off a little bit but then pick up and goes to the red line as mine doesn't.

Fuel is rich and it isn't leaning out.

No vac leaks or boost leaks.

The motor isn't breathing oil.

Timing is right.

AFM seems to be in good working order.

CAS seems to be in good working order.

He seemed to think the timing belt had jumped teeth and told me to check it, i thought if the belt had jumped over it would be running bad all the time and not just at 6000rpm. So i checked the timing belt and all the marks line up.

I went over my wiring and from what i have wired it up from it's correct.

The CAS isn't off centre as the timing is back to 15 degrees at roughly 850 rpm on idle.

New splitfire coilpacks less than 1500 km old.

New NGK copper plugs pre gapped to .8 less than 1500km old.

Before the motor went in it had new oil and filter, fuel filter, coolant and flush, water pump, timing belt and a boshi 040 installed.

Im taking the car back on Friday to have a some more work done with re run with a mates S2 computer, as i have a mate that works at the tuners shop and he reckons it might be ecu related.

The motor is pretty much stock apart from:

FMIC

Greddy profic type II boost controller (witch is off currently)

Boshi 040

3 inch exhaust with a centure muffler and rear muffler

Splitfires

Im thinking of getting a tune done with a power fc but im pretty sure my problem will still be there even with the new computer and tune.

As you can see im all out of ideas.

Any ideas or help will be great!

Cheers

Adam

Edited by Ad's
The Mafia Grand Master

The Mafia

Posted
Posted

dude.... 140rwkw and beyond is the rich and retard maps in the factory ECU.

TUrn your boost up and I bet it hits this hole a whole lot earlier.

Get a tunable ECU, its a known fact that the factory ECU is useless for anything above stock power.

You are wasting your money trying to "fix" the factory ECU.

Powerfc...

Ad's Mentor

Ad's

Posted
  • Author
Posted

Boost controller got turned off as it was only making it run worse! And its still off currently! I will be looking at a power fc soon when i don't have a lack of money.

The VCT is working as it clicks and my mate pointed it out when it was in there!

Thanks

Ad's Mentor

Ad's

Posted
  • Author
Posted

Apparently its my air flow meter in the cooler piping! It's going back in a week or so when i have moved it back and seeing it it changes anything!

islade : I borrowed a mates manual computer and it didn't make a difference.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • joshuaho96
      Help Understand GTT Boost Setup

      By joshuaho96 · Posted

      Save yourself the headache of an alarm. Immobilizer on the signal side of the main EFI relays so it won't start is good enough. DIY killswitch is the same thing except instead of a nice passive system you need to remember to switch it on and off.
    • GTSBoy
      Help Understand GTT Boost Setup

      By GTSBoy · Posted

      Yeah, the advent of canbus was supposed to cut down on wiring weight, then some bright marketing wonk says "oh, look at all these wonderful tech gadgets we can cram in here now that we have this wonderous technology" and some arsehole safety legislator says "oh, look at all the wonderful surveillance and tracking gadgets we can cram in here now that we have this wonderous technology" and some dipshit young engineer who has grown up thinking that an extra 500000 lines of code is not a problem because storage is cheap these days says "oh look at all this wonderful shit I can do to one up those dipshit arsholes over at VW" and the Karens of the world all go "oh look at all these fancy things I can do on my screen (so long as I am not driving on a bumpy road wherein touch screens immediately become the single most stupid shit idea ever shoveled into a car) and my 19 zone airconditioning keeps my sweaty fat folds a bit less damp and the windows close themselves because I'm too fat and lazy to wind them up for myself and these reversing sensors would have been great if I'd paid attention to them instead of smashing them on the bollard while I was reversing and staring fixedly forward that day I went to pick up little Charlize from ballet" and the sweaty mongoloids who say "oh this wonderful collision avoidance technology with these 45 excellent radar antennae scattered across the front of my car mean I can tailgate like a methed up tradie at full speed with no fear because the car and the 35 airbags will protect me if it all goes wrong" ...... </shallistopranting?>
    • Dose Pipe Sutututu
      Help Understand GTT Boost Setup

      By Dose Pipe Sutututu · Posted

      There's a post from a member (can't recall who), went down the path of a twin scroll G30-660 and it's doing over 300kW+ AND comes on about the same as a high flow RB25DET turbo. Have your cake and eat it too in this case. TBH, if I had a 2nd chance of building my car again (i.e. someone gave me what I wanted for my shit box, but the deal was I had to re-build another R33 and keep the change) I would just pop in a stock NEO motor (with new seals, rod bearings, ARP studs, head gasket, sump, Nitto pump), get a smaller twin scroll turbo, modify the stock low mount (keep the divider in place), and make a solid 300kW on 98RON and call it a day. 
    • MBS206
      Help Understand GTT Boost Setup

      By MBS206 · Posted

      It's all the sound deadening, and extra shit piled into them, plus all the extra (even though it's thinner) material for crumple zones. I can't fathom in modern cars why they need canbus to the headlights, and why the headlights must be vin coded on some cars to the ECU, BCM, and security module! Especially when they claim it's for security, yet, the canbus at the headlights let's thieves steal the car in minutes, so even more cars are being stolen! The Mercedes Sprinter 907 vans. They're a huge van, but a "basic" van. Yet they have that many canbus networks, plus two Lin networks, AND an Ethernet network. Logging a single network alone of 8 byte data frames, and they will generate a 20mb log file in 5 minutes. That's one network, and I can't remember the exact amount, but there's over 10 full CAN2.0B networks in them. I'm not a fan of modern cars, oddly, more and more I hate DBW, and all the bullshittery the cars try and interfere with. But all that bullshittery adds weight, plus crazy regulations on crumple zones, plus, ever picked a modern seat up, half of them have like 4 electric motors in them and will weigh 30+kg each. Then all the motors for things like adjustable steering columns blah blah blah. And did I mention the sound deadening so you can even hear an ambulance right behind you even if you 7.2surround sound is off?
    • silviaz
      R34 GTT idle problem

      By silviaz · Posted

      Ah ok, yeah it should be flat, I believe the r34 battery tray has these 3 bumps in them they makes it line up and everything is flat, don't see how it would tilt if everything is secured.
×
×
  • Create New...