Jump to content
SAU Community

Yz 426 F 2000 Model - Lots Of New Parts - Well Maintained - Mature Owner


Recommended Posts

ITEM:

YZ 426 F 2000 Model

CONDITION:

-The 2000 Model has the stainless steel valves that last longer than the titanium valves put in the 01 - 03 models.

Parts & Upgrades:

-Muzzys Full Titanium Exhaust(NEW)

-Full Acerbis Plastics (NEW)

-Gripper Seat (NEW)

-Megura Hydraulic Clutch (NEW)

-LED Front & Rear Lights Working With Switch (For Rec Reg)

-Wave Rotors Front & Rear (NEW)

-Genuine Yamaha Brake Pads Front & Rear (NEW)

-Alloy Shark Fin Rear Disk Brake Protector (NEW)

-Regina O Ring Gold Chain (NEW)

-IronMan Front Sprocket 14T (NEW)

-Ironman Rear Sprocket 51T (NEW)

-Blue Carby Drain Tubes (NEW)

-Renthal Handle Bars (NEW)

-Light Speed Front Brake Upgrade With different Cable Routing and Braided Brake Line

-Twin Air - Air Filter

-IMS Pro Series Foot Pegs (NEW)

-Yamaha Genuine Front and Rear Brake Master Cylinder upgrade from 2004 model YZ450F

-Genuine Yamaha Side Frame Protectors

-Front Frame / Engine Protector

-Sticker Kit is new but Peeling on the tank

-Michelin Tubes Front and Rear (NEW)

-Dunlop Tyres Front and Rear (Front tyre looks new Rear has only a few hours use)

-Hydraulic Lift up Stand Included

-Fold out ramp for loading onto a trailer or ute (NEW)

-Magnetic Oil Sump Plug

Condition:

-Overall excellent mechanical condition well maintained excellent working condition easy bike to ride with lots of power too

-Starts easily once you get the starting procedure sorted out

-Front and Rear Wheels could do with a true up

-Stickers on the tank are peeling others are fine

-One spoke from the Rear Wheel is broken but I have two new spares which will be included

Servicing:

-Has had a new timing chain installed (Less than 5hrs ago)

-Has had new shims installed and valve clearances set (Less than 5hrs ago)

-Oil changed every 3-5 hours

-Oil filter changed every 3-5 hours when oil is done

-Air Filter cleaning after every ride (I have a spare and just swap between the two)

-NGK Iridium IX Spark Plugs used

-Comes with a complete service manual including pictures, on how to maintain your YZ426F

-No expense spared when it comes to parts and servicing

Original Parts Included:

-Full Exhaust

-Clutch Cable and Lever

-Decomp Lever

-Chain

-14T Front Sprocket

-15T Front Sprocket

-42T Rear Sprocket

-44T Rear Sprocket

-48T Rear Sprocket

-49T Rear Sprocket

-50T Rear Sprocket

-Front Rotor

-Rear Rotor

-Front & Rear Pads 50%

-Chain Guides Worn But Ok

-Twin Air - Air Filter (NEW)

-Yamaha Foot Pegs

-AEM Handle Bars

-Front Frame / Engine Protector

-Rear View Mirror (For Rec Reg) (NEW)

-Full Original Yamaha plastics (Not broken just a few scratches)

Lubricants Included:

-Motul 10w50 Engine Oil

-Engine Ice Coolant

-Motul DOT4 Brake Fluid

-Motul Chain Lube

-Motul Air Filter Oil

-1x Spare oil Filter Included

Included If Bike Sells For The Right Price:

-Yamaha WR426F Long Range Fuel Tank (Blue)

-Yamaha WR426F Seat Excellent Condition (Blue & Black Cover)

This is a perfect upgrade for someone who wants to ride long distances, tracks and trails or someone who wants to ride and not fill up as oftern.

PICTURES:

http://s667.photobucket.com/albums/vv32/sime1982/Yamaha%20YZ426F%202000/

eBay

http://cgi.ebay.com.au/Yamaha-YZ-426-F-2000-Lots-Mods-Upgrades-Spares-/230587964397?pt=AU_Motorcycles&hash=item35b01d1bed

REASON FOR SELLING:

Focusing on my career and masters studies

PRICE AND PRICE CONDITIONS:

Excellent Condition

$4k

LOCATION:

Victoria, Coburg 3058

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I was just going through this on Neil's car (33 gtst). Assuming you are using standard AAC and Cold start valves, you need Post Turbo Pre throttle to Boost Controller (if you have one) then to Turbo Wastegate Pre throttle to AAC input AAC input T piece to Cold start input Cold start output to plenum post throttle AAC Output to plenum post throttle AAC Output to brake booster (needs a 1 way valve) Plenum post throttle to Fuel Pressure Regulator Plenum post throttle to Blow off valve signal Plenum post throttle to Boost controller input (if you have one)
    • I’m trying to figure out the purpose of these fittings. Assuming they’re for coolant but not sure where the lead to. I know the bigger one on the right (which isn’t filled) is the brake booster. If anyone has a photo of a diagram of this intake or has a set of instructions it’d be greatly appreciated 
    • How much is that r32? Is that $170k or $1.7m 
    • Ahhh! My silly brain was thinking Nissan started selling them straight away, but they waited w or three years didn't they?   Maybe Duncan should build an R35 race car over the V37... There's a cheap yellow one on car sales Duncan, would only need your splash of purple added...
    • Welcome (back) Gaston! Keep us up to date with the hunt!
×
×
  • Create New...